60 in. Low Pressure 3/8 in. ID Power Steering Hose
60 in. Low Pressure 3/8 in. ID Power Steering Hose
SKU: SKU: JM2015-60L
In stock
Product Details
Features
- 60 in. low-pressure power steering hose with 3/8 in. inner diameter
- Designed for return-side (low-pressure) fluid routing, not the pressure side
- Universal fit — ideal for LS swaps and custom hose routing setups
- Confirm length and ID match your system before cutting or installing
Description
This 60 in. low-pressure power steering hose has a 3/8 in. inner diameter and is built for return-side fluid routing in custom or swap power steering systems. It's a universal-length hose, not tied to a specific vehicle, engine, or pump — length and inner diameter are the compatibility factors that matter.
This is a low-pressure hose specifically, intended for the return side of the system (fluid flowing back to the reservoir), not the high-pressure line between the pump and steering box or rack. Confirm your system uses a 3/8 in. ID return line before ordering, and trim to length as needed for your routing.
Applications
Universal fit for any power steering system using a 3/8 in. ID low-pressure return hose — commonly used in LS swaps and custom steering hose routing.
Installation
Cut to length as needed for your routing. Confirm this is being used for the low-pressure return side of your system, not the high-pressure line between the pump and steering box or rack, since the two require different pressure ratings.
Specs
| Hose Inner Diameter | 3/8 in. |
| Low Pressure Hose Length | 60 in. |
Engine Fitment
COMPATIBLE WITH
• Universal low-pressure (return-side) power steering hose applications
• LS swap power steering plumbing
• Custom steering hose fabrication, street rod, and performance builds
NOTES
• Universal bulk hose — not vehicle-specific. Confirm 3/8" ID matches your return-line fitting/barb size before ordering.
• Low-pressure/return line only — not rated for the high-pressure feed side of the system. Use a dedicated high-pressure hose for that circuit.
• Fittings not included; hose ends and clamps must be sourced separately unless the listing states otherwise.
COMMON VEHICLE APPLICATIONS
Not applicable — universal bulk return-line hose, commonly used in LS swap, street rod, and custom power steering plumbing.
Q&A
Is this hose for the high-pressure or low-pressure side of the system?
This hose is designed for the low-pressure return side of the power steering system. It is not intended for use as the high-pressure hose between the power steering pump and the steering gear or rack.
What length and diameter does this hose come in?
The hose measures 60 inches long and has a 3/8-inch inner diameter.
Does this fit a specific vehicle?
No. This is a universal power steering return hose that is selected based on the required hose length and 3/8-inch inside diameter rather than a specific vehicle or engine application.
What is this hose made from?
The product information does not specify the hose material. It should be confirmed with the manufacturer before listing a material specification.
Can I cut this hose to a shorter length?
Yes. The hose can be trimmed to the desired length to suit your routing requirements during installation.
Emissions Notice
This product does not affect vehicle emissions and is not subject to emissions compliance regulations.
60 in. Low Pressure 3/8 in. ID Power Steering Hose
This 60 in. low-pressure power steering hose has a 3/8 in. inner diameter and is built for return-side fluid routing in custom or swap power steering systems. It's a universal-length hose, not tied to a specific vehicle, engine, or pump — length and inner diameter are the compatibility factors that matter.
This is a low-pressure hose specifically, intended for the return side of the system (fluid flowing back to the reservoir), not the high-pressure line between the pump and steering box or rack. Confirm your system uses a 3/8 in. ID return line before ordering, and trim to length as needed for your routing.
Applications
Universal fit for any power steering system using a 3/8 in. ID low-pressure return hose — commonly used in LS swaps and custom steering hose routing.
Installation
Cut to length as needed for your routing. Confirm this is being used for the low-pressure return side of your system, not the high-pressure line between the pump and steering box or rack, since the two require different pressure ratings.
COMPATIBLE WITH
• Universal low-pressure (return-side) power steering hose applications
• LS swap power steering plumbing
• Custom steering hose fabrication, street rod, and performance builds
NOTES
• Universal bulk hose — not vehicle-specific. Confirm 3/8" ID matches your return-line fitting/barb size before ordering.
• Low-pressure/return line only — not rated for the high-pressure feed side of the system. Use a dedicated high-pressure hose for that circuit.
• Fittings not included; hose ends and clamps must be sourced separately unless the listing states otherwise.
COMMON VEHICLE APPLICATIONS
Not applicable — universal bulk return-line hose, commonly used in LS swap, street rod, and custom power steering plumbing.
SPECIFICATIONS
Hose Inner Diameter: 3/8 in.
Low Pressure Hose Length: 60 in.
