Billet Aluminum Remote Power Steering Reservoir - Black
Billet Aluminum Remote Power Steering Reservoir - Black
SKU: SKU: JM2012BK
In stock
Product Details
Features
- Billet aluminum reservoir with vented cap and anti-foam baffle
- -6AN inlet / -10AN outlet threaded fittings (fittings not included)
- Universal fit for any -6AN/-10AN remote-reservoir setup, not vehicle-specific
- Black finish, mounting bracket and hardware included, 1-year warranty
Description
TSP's billet aluminum remote power steering reservoir is built for engine swaps and custom steering setups where a remote-mount reservoir is needed instead of a factory integral-reservoir pump. It features a vented cap with a built-in anti-foam baffle to prevent fluid foaming, along with a -6AN inlet and -10AN outlet for straightforward hose connections.
This is a universal remote reservoir — it isn't tied to a specific vehicle, engine, or pump model. Compatibility comes down to matching your pump's inlet/outlet fittings to -6AN (inlet) and -10AN (outlet). It is not compatible with factory-style integral-reservoir ("canned-ham") Saginaw pumps, since those pumps don't use a remote reservoir at all.
Fittings are not included and must be purchased separately. Confirm your mounting location has adequate clearance for the reservoir's 9.750" length x 2.840" width before installing. Mounting bracket and hardware are included, with a polished finish and 1-year warranty.
Applications
Fits any properly matched -6AN/-10AN remote-reservoir pump setup — commonly used in street rod, muscle car, and engine swap builds where a remote reservoir replaces a factory integral-reservoir pump.
Installation
Mounts using the included bracket and hardware. Confirm your pump's inlet/outlet sizes match -6AN and -10AN before ordering, and confirm your mounting location has clearance for the reservoir's full length and width. Fittings and hose ends are not included and must be sourced separately.
Specs
| Cap Included | Yes |
| Color | Black |
| Finish | Black |
| Fittings Included | No |
| Inlet Attachment Type | Threaded |
| Inlet Diameter | -6 AN |
| Inlet Quantity | 1 |
| Length | 9.750 in. |
| Material | Aluminum |
| Mounting Bracket Included | Yes |
| Mounting Hardware Included | Yes |
| Outlet Attachment Type | Threaded |
| Outlet Diameter | -10 AN |
| Outlet Quantity | 1 |
| Remote Mounted | Yes |
| Width | 2.840 in. |
Engine Fitment
COMPATIBLE WITH
- Remote reservoir hydraulic steering systems
- Aftermarket steering pump applications using a -6 AN inlet / -10 AN outlet reservoir
- Street rod and custom steering setups
- Performance steering systems
NOTES
- Universal remote reservoir — not vehicle-specific. Confirm your pump's inlet/outlet fittings match -6 AN (inlet) and -10 AN (outlet) before ordering.
- Fittings not included — hose ends must be purchased separately.
- Confirm mounting location has adequate clearance for a 9.750" length x 2.840" width reservoir.
- Not compatible with factory-style integral-reservoir (canned-ham) Saginaw pumps, which don't use a remote reservoir at all.
COMMON VEHICLE APPLICATIONS
Not applicable — universal remote reservoir compatible with any properly matched -6 AN/-10 AN remote-reservoir pump setup, commonly used in street rod, muscle car, and custom steering builds.
Q&A
What applications is this power steering component compatible with?
This power steering component is designed for UNIVERSAL, NOTE: Intended for custom remote reservoir set-ups..
Will this power steering component fit my engine?
This component is intended for compatible vehicle applications and should match your steering system and bracket setup.
What does a power steering pump do?
A power steering pump provides hydraulic pressure to assist steering, making it easier to turn the wheels.
What material is this component made from?
This component is made from aluminum, offering durability and reduced weight.
Do I need a pulley for this power steering pump?
Yes, a compatible pulley is required if not included.
Do I need a reservoir for this power steering setup?
Yes, a reservoir is required to hold power steering fluid if not included.
What finish does this component have?
This component features a black finish, which affects appearance but not function.
Will this improve steering performance?
Yes, a properly matched power steering pump can improve steering feel and responsiveness.
Is this a good upgrade over a stock power steering pump?
Yes, aftermarket power steering components can improve durability, performance, and appearance.
Do I need to bleed the system after installation?
Yes, the power steering system should be properly bled after installation to remove air and ensure smooth operation.
Can this be used on performance or custom builds?
Yes, power steering components are commonly used in performance and custom builds.
Emissions Notice
This product does not affect vehicle emissions and is not subject to emissions compliance regulations.
Billet Aluminum Remote Power Steering Reservoir - Black
TSP's billet aluminum remote power steering reservoir is built for engine swaps and custom steering setups where a remote-mount reservoir is needed instead of a factory integral-reservoir pump. It features a vented cap with a built-in anti-foam baffle to prevent fluid foaming, along with a -6AN inlet and -10AN outlet for straightforward hose connections.
This is a universal remote reservoir — it isn't tied to a specific vehicle, engine, or pump model. Compatibility comes down to matching your pump's inlet/outlet fittings to -6AN (inlet) and -10AN (outlet). It is not compatible with factory-style integral-reservoir ("canned-ham") Saginaw pumps, since those pumps don't use a remote reservoir at all.
Fittings are not included and must be purchased separately. Confirm your mounting location has adequate clearance for the reservoir's 9.750" length x 2.840" width before installing. Mounting bracket and hardware are included, with a polished finish and 1-year warranty.
Applications
Fits any properly matched -6AN/-10AN remote-reservoir pump setup — commonly used in street rod, muscle car, and engine swap builds where a remote reservoir replaces a factory integral-reservoir pump.
Installation
Mounts using the included bracket and hardware. Confirm your pump's inlet/outlet sizes match -6AN and -10AN before ordering, and confirm your mounting location has clearance for the reservoir's full length and width. Fittings and hose ends are not included and must be sourced separately.
COMPATIBLE WITH
- Remote reservoir hydraulic steering systems
- Aftermarket steering pump applications using a -6 AN inlet / -10 AN outlet reservoir
- Street rod and custom steering setups
- Performance steering systems
NOTES
- Universal remote reservoir — not vehicle-specific. Confirm your pump's inlet/outlet fittings match -6 AN (inlet) and -10 AN (outlet) before ordering.
- Fittings not included — hose ends must be purchased separately.
- Confirm mounting location has adequate clearance for a 9.750" length x 2.840" width reservoir.
- Not compatible with factory-style integral-reservoir (canned-ham) Saginaw pumps, which don't use a remote reservoir at all.
COMMON VEHICLE APPLICATIONS
Not applicable — universal remote reservoir compatible with any properly matched -6 AN/-10 AN remote-reservoir pump setup, commonly used in street rod, muscle car, and custom steering builds.
SPECIFICATIONS
Cap Included: Yes
Color: Silver
Finish: Black
Fittings Included: No
Inlet Attachment Type: Threaded
Inlet Diameter: -6 AN
Inlet Quantity: 1
Length: 9.750 in.
Material: Aluminum
Mounting Bracket Included: Yes
Mounting Hardware Included: Yes
Outlet Attachment Type: Threaded
Outlet Diameter: -10 AN
Outlet Quantity: 1
Remote Mounted: Yes
Width: 2.840 in.
