60 in. High Pressure 3/8 in. ID Power Steering Hose
60 in. High Pressure 3/8 in. ID Power Steering Hose
SKU: SKU: JM2015-60H
In stock
Product Details
Features
- 60 in. high-pressure hose rated for the pump-to-gear/rack feed side only
- 3/8 in. inner diameter, universal fit for LS swap and custom builds
- Use TSP's low-pressure hose (sold separately) for the return side
- Fittings, hose ends, and clamps not included — sourced separately
Description
This 60 in. high-pressure power steering hose has a 3/8 in. inner diameter and is built for the pump-to-gear/rack (feed) side of a power steering system. It's a universal bulk hose, not tied to a specific vehicle — compatibility comes down to matching inner diameter and pressure rating to your system rather than vehicle or engine.
This is a high-pressure/feed line only. Use TSP's low-pressure hose for the return side of the system — the two are not interchangeable, since return-side hose isn't rated for the higher pressure on the feed side. Fittings, hose ends, and clamps are not included and must be sourced separately.
Applications
Universal fit for any power steering system using a 3/8 in. ID high-pressure feed hose — commonly used in LS swaps, street rod builds, and custom steering hose fabrication.
Installation
Confirm 3/8" ID matches your fitting/barb size before ordering. This is the high-pressure/feed line only, rated for the pump-to-gear/rack side of the system — use the low-pressure hose for the return side. Hose ends and clamps must be sourced separately.
Specs
| Hose Inner Diameter | 3/8 in. |
| High Pressure Hose Length | 60 in. |
Engine Fitment
COMPATIBLE WITH
• Universal high-pressure (feed-side) power steering hose applications
• LS swap power steering plumbing
• Custom steering hose fabrication, street rod, and performance builds
NOTES
• Universal bulk hose — not vehicle-specific. Confirm 3/8" ID matches your fitting/barb size before ordering.
• High-pressure/feed line only — rated for the pump-to-gear/rack pressure side of the system. Use the low-pressure hose for the return side.
• Fittings not included; hose ends and clamps must be sourced separately unless the listing states otherwise.
COMMON VEHICLE APPLICATIONS
Not applicable — universal bulk high-pressure hose, commonly used in LS swap, street rod, and custom power steering plumbing.
Q&A
Is this hose for the high-pressure or low-pressure side of the system?
This hose is designed for the high-pressure feed side of the power steering system, connecting the power steering pump to the steering gear or rack. It is not intended for use as a low-pressure return hose.
What length and diameter does this hose come in?
The hose measures 60 inches long and has a 3/8-inch inner diameter.
Does this fit a specific vehicle?
No. This is a universal high-pressure power steering hose that is selected based on its diameter, length, and pressure rating rather than a specific vehicle or engine application.
What is this hose made from?
The product information does not specify the hose material. The material should be confirmed with the manufacturer before listing a specification.
Are fittings included?
No. Fittings, hose ends, and clamps are not included and must be purchased separately.
Emissions Notice
This product does not affect vehicle emissions and is not subject to emissions compliance regulations.
60 in. High Pressure 3/8 in. ID Power Steering Hose
This 60 in. high-pressure power steering hose has a 3/8 in. inner diameter and is built for the pump-to-gear/rack (feed) side of a power steering system. It's a universal bulk hose, not tied to a specific vehicle — compatibility comes down to matching inner diameter and pressure rating to your system rather than vehicle or engine.
This is a high-pressure/feed line only. Use TSP's low-pressure hose for the return side of the system — the two are not interchangeable, since return-side hose isn't rated for the higher pressure on the feed side. Fittings, hose ends, and clamps are not included and must be sourced separately.
Applications
Universal fit for any power steering system using a 3/8 in. ID high-pressure feed hose — commonly used in LS swaps, street rod builds, and custom steering hose fabrication.
Installation
Confirm 3/8" ID matches your fitting/barb size before ordering. This is the high-pressure/feed line only, rated for the pump-to-gear/rack side of the system — use the low-pressure hose for the return side. Hose ends and clamps must be sourced separately.
COMPATIBLE WITH
• Universal high-pressure (feed-side) power steering hose applications
• LS swap power steering plumbing
• Custom steering hose fabrication, street rod, and performance builds
NOTES
• Universal bulk hose — not vehicle-specific. Confirm 3/8" ID matches your fitting/barb size before ordering.
• High-pressure/feed line only — rated for the pump-to-gear/rack pressure side of the system. Use the low-pressure hose for the return side.
• Fittings not included; hose ends and clamps must be sourced separately unless the listing states otherwise.
COMMON VEHICLE APPLICATIONS
Not applicable — universal bulk high-pressure hose, commonly used in LS swap, street rod, and custom power steering plumbing.
SPECIFICATIONS
Hose Inner Diameter: 3/8 in.
High Pressure Hose Length: 60 in.
