Chrome 155 GPH Electric Fuel Pump

• External electric pump delivers 155 GPH flow at up to 14 PSI, 12V system

• Highest-flow option in TSP's electric pump lineup (115/130/155 GPH)

• Chrome mounting bracket included; regulator, gasket, hardware not included

• 0.375 in. NPT threaded inlet/outlet, 4A max draw, 2-wire connection

This external electric fuel pump delivers 155 GPH at up to 14 PSI — the highest flow rating in TSP's electric pump lineup, built for higher-demand carbureted or EFI fuel systems needing more volume than the 115 or 130 GPH pumps provide. It runs on a 12V electrical system, drawing up to 4A, and should be matched to your vehicle's fuel demand, wiring capacity, and overall fuel system layout.

This is a universal pump — it isn't tied to a specific vehicle, engine, or fuel system. Compatibility depends on matching flow rating, pressure range, filtration, wiring, and mounting location to your existing setup rather than vehicle fitment. It's not a direct replacement unless all specifications genuinely match your current fuel system.

A chrome mounting bracket is included; a regulator, gasket/seal, and mounting hardware are not included and must be sourced separately. Confirm pre-filter and post-filter placement, hose size, and fitting style before installation.

Applications
Universal fit for carbureted or EFI gasoline fuel systems needing 155 GPH flow at up to 14 PSI — TSP's highest-flow electric pump option, commonly used in fuel cell setups, tank-mounted pickup systems, or external inline pump installations where specifications match.

Installation
Mount away from excessive heat and debris using the included chrome bracket. Verify wiring capacity, grounding, regulator selection, filter orientation, hose size, and fitting style before installation. A regulator, gasket/seal, and mounting hardware are not included.

Is this an electric or mechanical fuel pump?
This is an electric fuel pump designed for external mounting. It operates on a 12-volt electrical system and is not mechanically driven by the engine.

What voltage and amperage does this pump use?
This pump operates on 12 volts and draws up to 4 amps at maximum load.

How does this compare to TSP's 115 and 130 GPH electric pumps?
This is TSP's highest-flow electric fuel pump, delivering 155 GPH compared to 130 GPH and 115 GPH for the other models. All three pumps share the same 14 PSI maximum pressure, making this version the best choice for higher fuel demand applications.

Is this pump for a specific vehicle, or is it universal?
This is a universal electric fuel pump. It is not designed for a specific vehicle or engine. Compatibility depends on matching the pump's flow rate, pressure, plumbing, electrical requirements, and fuel system configuration to your application.

Is this pump for carbureted or EFI systems?
This pump can be used with either carbureted or EFI fuel systems, provided the system's fuel pressure and flow requirements are compatible with the pump's 155 GPH flow capacity and 14 PSI maximum pressure. A fuel pressure regulator may be required depending on the application.

Does this include a regulator?
No. A fuel pressure regulator is not included and should be selected separately based on your fuel system's pressure requirements.

Does this include a mounting bracket?
Yes. A chrome mounting bracket is included for installation. Mounting hardware is not included.

Is this pump for internal (in-tank) or external mounting?
This pump is designed for external mounting and should not be installed inside the fuel tank.