• Top Street Performance Pro Series Ford Small Block 289-302 OEM / Edelbrock Cylinder Head Bolt Kit
  • Top Street Performance Pro Series Ford Small Block 289-302 OEM / Edelbrock Cylinder Head Bolt Kit - front view
1 2
Top Street Performance

Pro Series Ford Small Block 289-302 OEM / Edelbrock Cylinder Head Bolt Kit

Pro Series Ford Small Block 289-302 OEM / Edelbrock Cylinder Head Bolt Kit

SKU: 619-82075

$56.10
$56.10 $63.75
Shipping calculated at checkout.

In stock

Top Street Performance (TSP) is committed to providing high-quality performance parts while complying with emissions regulations. This product is designed for use on vehicles that comply with federal emissions regulations. It is the customer’s responsibility to verify that this part is legal for use in their state or local jurisdiction. Check with your local emissions authority before purchasing.

Product Details

Features

  • Fits Ford Small Block Windsor applications including 289 and 302 engines when applicable
  • Bolt kit with 12-point hardware and 35 Chromoly Steel construction for performance engine builds
  • Provides strong, consistent clamping force to support head gasket sealing and cylinder pressure control
  • Application-specific torque procedure listed in specs: 3 steps, to 85 ft-lbs

Description

This cylinder head bolt kit is manufactured from heat-treated 35 chromoly steel with a minimum tensile strength of 190,000 PSI, designed for Ford Small Block Windsor 289 and 302 engines using factory-style or Edelbrock cylinder head bolt patterns. The 12-point head design supports secure installation and accurate torque readings.

Threads are rolled after heat treatment and finished in black oxide with an oil coating for corrosion resistance. This kit is not compatible with 351C Cleveland, 351M, 400M, FE, or 385-series Big Block Ford engines.


Applications
Fits Ford Small Block Windsor 289 (4.7L) and 302 (5.0L) engines, including Mustang, F-Series, Bronco, Falcon/Fairlane, and Mercury Cougar applications.

Installation
Torque in three steps: 25 ft-lbs, then 50 ft-lbs, then 85 ft-lbs. Verify cylinder head style, block thread size, and washer requirements before installation.

Specs

Torque 3 steps up to 85ft-lbs / step 1 25ft-lbs / step 2 50ft-lbs / step 3 85 ft-lbs
Color Black
Fastener Style Bolt
Grade Performance
Head Style 12-point
Material 35 Chromoly Steel
Quantity Sold as a kit

Engine Fitment

COMPATIBLE WITH
FORD SMALL BLOCK WINDSOR V8
• 4.7L / 289 in³
• 5.0L / 302 in³

NOTES
• Designed for Ford Small Block Windsor engine platforms.
• Verify head bolt or stud length, cylinder head design, and washer requirements before installation.
• Will not fit 351C Cleveland, 351M, 400M, FE, or 385-series Big Block Ford engines.

COMMON VEHICLE APPLICATIONS
Ford Mustang (1965–1995 289 / 302 equipped)
Ford F-Series (Small Block Windsor equipped)
Ford Bronco (Small Block Windsor equipped)
Ford Falcon / Fairlane (Small Block Windsor equipped)
Mercury Cougar (Small Block Windsor equipped)

Q&A

What does this bolt kit fit?
Ford Small Block Windsor 289 (4.7L) and 302 (5.0L) engines.

Does this fit a 351 Cleveland or 351M?
No — despite similar naming, 351C (Cleveland) and 351M are different engine families from the Windsor small block and use different head bolt patterns. This kit is not compatible with 351C, 351M, 400M, FE, or 385-series Big Block Ford engines.

What torque procedure does this kit use?
A 3-step sequence: 25 ft-lbs, then 50 ft-lbs, then 85 ft-lbs.

What material are these bolts made from?
Heat-treated 35 chromoly steel with a black oxide finish and oil coating for corrosion resistance.

What head style do these bolts use?
12-point.

Is this kit compatible with Edelbrock aftermarket heads?
Yes, provided the heads use standard Ford Small Block Windsor bolt hole spacing — confirm your specific Edelbrock casting before ordering.

Emissions Notice

This product does not affect vehicle emissions and is not subject to emissions compliance regulations.