Power Steering Pump 3/4" Press Fit Single 1/2" Groove Steel Pulley - Satin
Power Steering Pump 3/4" Press Fit Single 1/2" Groove Steel Pulley - Satin
SKU: SKU: SP8941
Low stock
Product Details
Features
- 3/4" press-fit steel pulley for GM Saginaw power steering pumps
- 1/2" V-belt groove with satin finish for a clean front-drive look
- Fits Saginaw pumps on small block Chevy, big block Chevy, and small block Ford drives
- Press-fit attachment requires the proper pulley installation/removal tool
Description
This is a satin steel pulley built for GM Saginaw power steering pumps with a 3/4" press-fit shaft, featuring a single 1/2" V-belt groove and a 5.750" outside diameter. It's a common fit across Saginaw pump accessory drives used on small block Chevy, big block Chevy, and small block Ford applications.
This pulley is commonly used on Saginaw pump setups found on Camaro, Chevelle, Nova, and C10 truck accessory drives, as well as street rod, hot rod, and custom accessory drive builds running a press-fit Saginaw pump. Because it's a press-fit design, installation and removal require the proper power steering pulley tool — pressing it on or off without one can damage the pump shaft.
This pulley is built for 3/4" press-fit shafts only and is not compatible with 5/8" keyed-shaft Saginaw pumps or GM Type II (TC) power steering pumps. Confirm shaft type, groove width, and pulley offset before ordering. Hardware is not included. Sold individually.
Steel Pulley Built for Press-Fit Saginaw Pump Shafts
Machined from steel with a satin finish, this single-groove pulley is sized for the 3/4" press-fit shaft used on GM Saginaw power steering pumps, with a 1/2" V-belt groove and 5.750" outside diameter for accurate belt alignment.
Correct Pulley Attachment Style Prevents Shaft Damage
Installing the wrong pulley attachment style — or pressing a pulley on or off without the correct tool — can damage a press-fit Saginaw pump shaft. This pulley is matched specifically to 3/4" press-fit shafts, helping ensure a secure, properly seated fit when installed correctly.
Specs
| Pump Style | Saginaw |
| Pulley Style | V-Belt |
| Groove Quantity | 1 |
| Groove Width | 1/2" |
| Pulley Attachment | Press Fit |
| Pulley Bore | 3/4" |
| Pulley Material | Steel |
| Outside Diameter | 5.750" |
| Underdrive | No |
| Overdrive | No |
| Hardware | Not Included |
| Quantity | Sold Individually |
Engine Fitment
COMPATIBLE WITH
GM SAGINAW POWER STEERING PUMPS
• GM Saginaw power steering pumps with a 3/4-inch press-fit shaft
• GM Saginaw P-Series power steering pumps
• GM V-belt accessory drive systems using a 1/2-inch V-belt
• Street rod and hot rod applications using a Saginaw power steering pump
• Small Block Chevy, Big Block Chevy, and Small Block Ford accessory drive systems using a compatible Saginaw pump
COMMON VEHICLE APPLICATIONS
Chevrolet Small Block V8 accessory drives
Chevrolet Big Block V8 accessory drives
Ford Small Block V8 accessory drives
Chevrolet Camaro
Chevrolet Chevelle
Chevrolet Nova
Chevrolet C10 / C/K Series Trucks
NOTES
• Designed for GM Saginaw power steering pumps with a • 3/4-inch press-fit shaft.
• Single 1/2-inch V-belt groove.
• Hardware not included.
• Verify shaft diameter, pulley attachment style (press-fit), pulley offset, groove width, and belt alignment before installation.
• Requires the proper power steering pulley installation/removal tool.
• Not compatible with 5/8-inch keyed-shaft Saginaw • pumps.
• Not compatible with GM Type II (TC) power steering pumps.
Q&A
Is this a pulley or a complete power steering pump?
This is the pulley only. It is a 3/4-inch press-fit steel pulley designed for compatible Saginaw power steering pumps. The power steering pump is not included.
Will this fit a keyed-shaft Saginaw pump?
No. This pulley is designed for 3/4-inch press-fit pump shafts only and is not compatible with 5/8-inch keyed-shaft Saginaw pumps.
Will this fit a GM Type II (TC) power steering pump?
No. This pulley is designed specifically for compatible Saginaw power steering pumps and is not compatible with GM Type II (TC) pumps.
Do I need a special tool to install or remove this pulley?
Yes. Press-fit pulleys require a power steering pulley installation and removal tool. Attempting installation or removal without the proper tool can damage the pulley or pump shaft.
What material is this pulley made from?
This pulley is manufactured from steel and features a satin finish for durability and a factory-style appearance.
Will this fit a Small Block Ford application?
Yes. It is compatible with Small Block Ford accessory drive systems using a compatible Saginaw power steering pump with a 3/4-inch press-fit shaft.
Does this come with mounting hardware?
No. Mounting hardware is not included.
What should I check before installing this pulley?
Verify the pump shaft diameter, attachment style (3/4-inch press-fit), groove width, pulley offset, and belt alignment before installation to ensure proper fitment and reliable operation.
Emissions Notice
This product does not affect vehicle emissions and is not subject to emissions compliance regulations.
Power Steering Pump 3/4" Press Fit Single 1/2" Groove Steel Pulley - Satin
This is a satin steel pulley built for GM Saginaw power steering pumps with a 3/4" press-fit shaft, featuring a single 1/2" V-belt groove and a 5.750" outside diameter. It's a common fit across Saginaw pump accessory drives used on small block Chevy, big block Chevy, and small block Ford applications.
This pulley is commonly used on Saginaw pump setups found on Camaro, Chevelle, Nova, and C10 truck accessory drives, as well as street rod, hot rod, and custom accessory drive builds running a press-fit Saginaw pump. Because it's a press-fit design, installation and removal require the proper power steering pulley tool — pressing it on or off without one can damage the pump shaft.
This pulley is built for 3/4" press-fit shafts only and is not compatible with 5/8" keyed-shaft Saginaw pumps or GM Type II (TC) power steering pumps. Confirm shaft type, groove width, and pulley offset before ordering. Hardware is not included. Sold individually.
Steel Pulley Built for Press-Fit Saginaw Pump Shafts
Machined from steel with a satin finish, this single-groove pulley is sized for the 3/4" press-fit shaft used on GM Saginaw power steering pumps, with a 1/2" V-belt groove and 5.750" outside diameter for accurate belt alignment.
Correct Pulley Attachment Style Prevents Shaft Damage
Installing the wrong pulley attachment style — or pressing a pulley on or off without the correct tool — can damage a press-fit Saginaw pump shaft. This pulley is matched specifically to 3/4" press-fit shafts, helping ensure a secure, properly seated fit when installed correctly.
COMPATIBLE WITH
GM SAGINAW POWER STEERING PUMPS
• GM Saginaw power steering pumps with a 3/4-inch press-fit shaft
• GM Saginaw P-Series power steering pumps
• GM V-belt accessory drive systems using a 1/2-inch V-belt
• Street rod and hot rod applications using a Saginaw power steering pump
• Small Block Chevy, Big Block Chevy, and Small Block Ford accessory drive systems using a compatible Saginaw pump
COMMON VEHICLE APPLICATIONS
Chevrolet Small Block V8 accessory drives
Chevrolet Big Block V8 accessory drives
Ford Small Block V8 accessory drives
Chevrolet Camaro
Chevrolet Chevelle
Chevrolet Nova
Chevrolet C10 / C/K Series Trucks
NOTES
• Designed for GM Saginaw power steering pumps with a • 3/4-inch press-fit shaft.
• Single 1/2-inch V-belt groove.
• Hardware not included.
• Verify shaft diameter, pulley attachment style (press-fit), pulley offset, groove width, and belt alignment before installation.
• Requires the proper power steering pulley installation/removal tool.
• Not compatible with 5/8-inch keyed-shaft Saginaw • pumps.
• Not compatible with GM Type II (TC) power steering pumps.
SPECIFICATIONS
Pump Style: Saginaw
Pulley Style: V-Belt
Groove Quantity: 1
Groove Width: 1/2"
Pulley Attachment: Press Fit
Pulley Bore: 3/4"
Pulley Material: Steel
Outside Diameter: 5.750"
Underdrive: No
Overdrive: No
Hardware: Not Included
Quantity: Sold Individually
