Power Steering Pump 3/4" Press Fit Double 3/8" Groove Steel Pulley - Black

• 3/4" press-fit double 3/8" groove steel pulley for GM Saginaw power steering pumps

• Black finish steel construction, 5.750" OD, standard-drive setup

• Runs dual 3/8" V-belts off one pump shaft on classic GM muscle car and truck builds

• Press-fit attachment requires the proper pulley installation/removal tool

This is a black steel double-groove pulley built for GM Saginaw power steering pumps with a 3/4" press-fit shaft, featuring two 3/8" V-belt grooves and a 5.750" outside diameter. The double-groove design lets you run two 3/8" V-belts off the same pulley, commonly used when an accessory drive needs to power both the power steering pump and an additional accessory from the same pump shaft.

This pulley is commonly used on Saginaw pump setups found in Chevrolet Camaro, Chevelle, Nova, and C10/K10 truck applications, as well as GM muscle car and street rod power steering conversions. Because it's a press-fit design, installation and removal require the proper power steering pulley tool — pressing it on or off without one can damage the pump shaft.

Confirm shaft diameter, attachment style (press-fit), groove width (3/8"), groove count, and pulley offset before ordering. Hardware is not included. Sold individually.

Steel Pulley Built to Run Dual 3/8" Belts on a Press-Fit Saginaw Shaft
Constructed from steel with a black finish, this double-groove pulley mounts to the 3/4" press-fit shaft used on GM Saginaw power steering pumps, letting you drive two 3/8" V-belts off a single pump shaft.

One Pulley, Two Belts — Simplifies Multi-Accessory Press-Fit Drives
When an accessory drive needs to power more than just the steering pump off the same shaft, a single-groove pulley won't work. This double 3/8" groove steel pulley lets you run dual V-belts from one press-fit Saginaw pump, helping keep multi-accessory drive setups compact and properly aligned on 3/8" belt systems.

Is this a pulley or a complete power steering pump?
This is the pulley only. It is a double-groove steel pulley designed for compatible GM Saginaw power steering pumps. The power steering pump is not included.

What groove width does this pulley use?
This pulley features two 3/8-inch V-belt grooves designed for accessory drives using 3/8-inch wide V-belts. Verify your belt width before ordering.

Why would I need a double-groove pulley instead of a single-groove?
A double-groove pulley allows two V-belts to be driven from a single power steering pump, making it ideal for accessory drive systems that require additional belt capacity.

Do I need a special tool to install or remove this pulley?
Yes. Press-fit pulleys require a power steering pulley installation and removal tool. Attempting installation or removal without the proper tool can damage the pulley or pump shaft.

What material is this pulley made from?
This pulley is manufactured from steel and features a durable black finish.

Will this fit a keyed-shaft Saginaw pump or a GM Type II pump?
No. This pulley is designed for 3/4-inch press-fit GM Saginaw pump shafts only. It is not compatible with 5/8-inch keyed-shaft Saginaw pumps or GM Type II (TC-series) power steering pumps.

Does this come with mounting hardware?
No. Mounting hardware is not included. The pulley is sold individually.

Can I use this on a classic GM muscle car or truck build?
Yes. It is commonly used on Camaro, Chevelle, Nova, C10/K10, street rod, hot rod, and other GM vehicles equipped with a compatible 3/4-inch press-fit Saginaw power steering pump.

What should I verify before installing this pulley?
Verify the pump shaft diameter (3/4-inch press-fit), attachment style, belt width (3/8-inch), groove count, pulley offset, and belt alignment before installation to ensure proper fitment and reliable operation.