Oil-Filled Canister Style Remote Ignition Coil - Female

• 45,000V Maximum Output: High-voltage spark energy for consistent ignition at startup, idle, and WOT

• Oil-Filled Construction: Superior heat management over epoxy-filled coils in demanding applications

• Female Connector Design: Direct-fit for female-terminal distributor ignition wiring configurations

• Billet Aluminum Housing: Durable, show-quality canister body with included mounting bracket

Restore or upgrade your classic distributor ignition system with the Top Street Performance Oil-Filled Canister Style Remote Ignition Coil with female connector. Delivering up to 45,000 volts of maximum output with a 350ms spark duration and 100:1 turns ratio, this high-output canister coil is engineered to bring consistent, reliable spark energy back to external-coil distributor ignition systems found in classic Chevrolet, Ford, Mopar, and other carbureted V8 applications.

The female connector configuration makes this coil a direct match for distributor ignition wiring harnesses that use a female terminal connection at the coil — a common setup in many classic and vintage ignition systems. Whether you're refreshing a tired points-style ignition, upgrading to a more reliable electronic distributor setup, or replacing a weak coil on a street rod, muscle car, or hot rod build, this canister coil delivers the voltage output, heat resistance, and period-correct canister styling your ignition system needs.

The oil-filled internal construction provides superior heat dissipation compared to epoxy-filled coils, helping the coil maintain consistent output during sustained driving, extended idle, and high-demand performance conditions. The round billet aluminum housing provides a clean, durable exterior that complements custom engine bays, vintage ignition setups, and show-quality builds. A mounting bracket is included for straightforward installation on a wide range of engine and firewall mounting configurations.

With a primary resistance of 0.7 Ohms, secondary resistance of 4,700 Ohms, peak current of 140mA, and inductance of 8.0 millihenrys, this coil is engineered to meet the electrical requirements of most distributor-based ignition systems. Available in Black, Red, Blue, and Chrome to match your build's style.

Oil-Filled Canister Coil Technology
The oil-filled internal construction is a key performance and durability advantage of this canister-style ignition coil. Unlike epoxy-filled coils, the oil-filled design allows heat generated during operation to transfer away from the coil's windings more effectively, helping maintain consistent electrical output across a wide range of operating temperatures. This thermal management capability makes oil-filled canister coils a preferred choice for classic car restorers, street rod builders, and performance enthusiasts who demand dependable ignition performance in engine bays that can generate significant heat. The round billet aluminum housing further supports heat dissipation while providing the classic canister profile that looks at home in vintage and custom engine bays alike. The coil must be mounted vertically to maintain proper oil distribution within the housing.

Performance Benefits
With a maximum output of 45,000 volts, a 350ms spark duration, and a 100:1 turns ratio, this ignition coil delivers strong, consistent spark energy across the full operating range of a distributor-based ignition system. The 0.7 Ohm primary resistance is matched to the requirements of most electronic and points-style distributor ignition systems, supporting reliable ignition timing, cleaner combustion, and more consistent engine operation from cold start through wide-open throttle. For classic carbureted V8 builds where ignition reliability is critical to consistent performance, upgrading to a high-output canister coil is one of the most effective and cost-efficient ignition improvements available.

Common Applications
This oil-filled canister coil is well-suited for a wide range of classic and performance ignition applications including classic Chevrolet small block and big block V8 builds, Ford small block Windsor and FE V8 applications, Mopar small block and big block distributor ignition systems, street rods, hot rods, muscle car restorations, and custom carbureted V8 builds using external-coil distributor ignition configurations. It is also commonly used in electronic distributor conversion projects where an upgraded coil is needed to support the higher energy demands of an electronic ignition module.

What is the difference between the female and male connector ignition coil?
The female and male designations refer to the connector type on the coil's low-voltage (primary) terminals. A female connector coil accepts male-terminal wiring plugs, while a male connector coil accepts female-terminal wiring plugs. Match the coil connector to your existing ignition wiring harness before purchasing.

What ignition systems is this coil compatible with?
This coil is designed for external-coil distributor ignition systems, including points-style ignitions, electronic distributor ignitions, and classic carbureted V8 applications that use a remote-mount canister-style coil. It is not compatible with coil-on-plug, coil-near-plug, or distributorless ignition systems.

What is the maximum voltage output of this coil?
This coil delivers up to 45,000 volts with a 350 ms spark duration and a 100:1 turns ratio, providing strong, consistent spark energy for distributor-based ignition systems.

Does this coil require a ballast resistor?
It depends on your specific ignition system. Many classic ignition systems using a 0.7-ohm primary resistance coil require a ballast resistor, while some electronic ignition systems do not. Verify your ignition system's requirements before installation.

Why choose an oil-filled coil over an epoxy-filled coil?
Oil-filled canister coils dissipate heat more effectively than epoxy-filled alternatives, helping maintain consistent voltage output during extended operation in high-temperature engine compartments.

Does this coil need to be mounted in a specific orientation?
Yes. Due to its oil-filled construction, the coil should be mounted vertically. Horizontal or inverted mounting can affect performance and service life. A mounting bracket is included to assist with proper installation.

What finish options are available?
This ignition coil is available in Black, Red, Blue, and Chrome to complement a variety of engine bay styles, from factory restorations to custom performance builds.

What vehicles and engines is this coil compatible with?
This is a universal canister-style ignition coil compatible with external-coil distributor ignition systems. Common applications include classic Chevrolet, Ford, and Mopar V8 engines, as well as street rods, hot rods, muscle cars, and other carbureted distributor-equipped vehicles.

Is a mounting bracket included?
Yes. A mounting bracket is included to support installation on engine blocks, firewalls, or custom mounting locations.

Can this coil be used with an electronic ignition conversion kit?
Yes. This coil is well suited for points-to-electronic ignition conversion kits that retain an external distributor and canister-style ignition coil. Verify the primary resistance requirements of your specific ignition module before installation.