Carburetor Adapter Install Kit
Carburetor Adapter Install Kit
SKU: SKU: SP7229
Low stock
Product Details
Features
- Zinc-plated steel stud kit for carburetor adapter plate installs
- 1/4"-20 thread, 2" stud length — verify length fits your stack-up
- Complete hardware set: studs, screws, nuts, and washers included
- Adapter plate sold separately — this kit is fasteners only
Description
This zinc-plated steel stud kit is designed for installing a carburetor adapter plate (sold separately) between your carburetor and air-cleaner assembly. It provides the fastener hardware needed to match carburetor necks, throttle-body openings, and air-cleaner assemblies during intake-system setup.
Each kit includes enough hardware for four mounting points: (4) 1/4" x 2" studs, (4) 1/4" x 3/4" screws, (4) hex nuts, (4) shoulder nuts, and (4) washers — 1/4"-20 thread throughout. Before ordering, verify the 2" stud length is sufficient for your adapter plate thickness plus air-cleaner base and top combined, and confirm compatibility with your specific adapter plate's hole pattern and thickness.
Commonly used for custom intake-system builds requiring non-standard hardware lengths, or any carburetor adapter plate installation where the stock hardware doesn't provide enough stack-up length.
Applications
Used for installing a carburetor adapter plate (sold separately) between a carburetor and air-cleaner assembly; suited to custom intake-system builds requiring non-standard hardware lengths.
Sizing
1/4"-20 thread, 2" stud length. Verify this length is sufficient for your adapter plate thickness plus air-cleaner base and top combined before ordering.
Specs
| Fastener Style | Stud |
| Fastener Material | Steel |
| Fastener Finish | Zinc Plated |
| Stud Length | 2" |
| Thread Size | 1/4" |
| Fastener Nut Style | Standard Hex |
| Washers | Included |
| Quantity | Set Of 4 |
| Included | (4) 1/4" X 2" Studs(4) 1/4" X 3/4" Screws(4) Hex Nuts(4) Shoulder Nuts(4) Washers |
Engine Fitment
COMPATIBLE WITH
Universal — 1/4"-20 thread, 2" stud length. Confirm compatibility with your specific adapter plate's hole pattern and thickness before ordering.
NOTES
• Verify stud length (2") is sufficient for your adapter plate thickness plus air-cleaner base and top combined.
• Verify gasket sealing and bolt alignment before final assembly.
COMMON VEHICLE APPLICATIONS
Installing a carburetor adapter plate (sold separately) between carburetor and air-cleaner assembly
Custom intake-system builds requiring non-standard hardware lengths
Q&A
Does this kit include the carburetor adapter plate?
No. This kit includes mounting hardware only. The carburetor adapter plate must be purchased separately.
How many pieces are in this kit?
This kit includes 20 pieces: (4) studs, (4) screws, (4) hex nuts, (4) shoulder nuts, and (4) washers—enough hardware for four mounting points.
Is 2" stud length enough for my setup?
The 2-inch studs must be long enough to accommodate your adapter plate, air cleaner base, and air cleaner top. Verify your total stack height before ordering to ensure these studs provide adequate thread engagement.
What thread size does this kit use?
All hardware in this kit uses 1/4"-20 threads.
What's the material and finish on this hardware?
The hardware is manufactured from zinc-plated steel for corrosion resistance.
Emissions Notice
This product does not affect vehicle emissions and is not subject to emissions compliance regulations.
Carburetor Adapter Install Kit
This zinc-plated steel stud kit is designed for installing a carburetor adapter plate (sold separately) between your carburetor and air-cleaner assembly. It provides the fastener hardware needed to match carburetor necks, throttle-body openings, and air-cleaner assemblies during intake-system setup.
Each kit includes enough hardware for four mounting points: (4) 1/4" x 2" studs, (4) 1/4" x 3/4" screws, (4) hex nuts, (4) shoulder nuts, and (4) washers — 1/4"-20 thread throughout. Before ordering, verify the 2" stud length is sufficient for your adapter plate thickness plus air-cleaner base and top combined, and confirm compatibility with your specific adapter plate's hole pattern and thickness.
Commonly used for custom intake-system builds requiring non-standard hardware lengths, or any carburetor adapter plate installation where the stock hardware doesn't provide enough stack-up length.
Applications
Used for installing a carburetor adapter plate (sold separately) between a carburetor and air-cleaner assembly; suited to custom intake-system builds requiring non-standard hardware lengths.
Sizing
1/4"-20 thread, 2" stud length. Verify this length is sufficient for your adapter plate thickness plus air-cleaner base and top combined before ordering.
COMPATIBLE WITH
Universal — 1/4"-20 thread, 2" stud length. Confirm compatibility with your specific adapter plate's hole pattern and thickness before ordering.
NOTES
• Verify stud length (2") is sufficient for your adapter plate thickness plus air-cleaner base and top combined.
• Verify gasket sealing and bolt alignment before final assembly.
COMMON VEHICLE APPLICATIONS
Installing a carburetor adapter plate (sold separately) between carburetor and air-cleaner assembly
Custom intake-system builds requiring non-standard hardware lengths
SPECIFICATIONS
Fastener Style: Stud
Fastener Material: Steel
Fastener Finish: Zinc Plated
Stud Length: 2"
Thread Size: 1/4"
Fastener Nut Style: Standard Hex
Washers: Included
Quantity: Set Of 4
Included: (4) 1/4" X 2" Studs(4) 1/4" X 3/4" Screws(4) Hex Nuts(4) Shoulder Nuts(4) Washers
