10" x 2" Round Paper Air Filter
10" x 2" Round Paper Air Filter
SKU: SKU: SP7115
In stock
Product Details
Features
- White paper media restores airflow in worn or clogged filters
- Low-profile 2" height fits tight-clearance engine bays
- 10" OD with 5 1/8" neck fits single 4-barrel carb housings
- Match OD, height, and inlet diameter — same OD can differ in neck size
Description
When a round air-cleaner element gets dirty, restricted, or worn out, replacing it restores the airflow and filtration the assembly was designed for. This 10" round paper element is built as a direct service replacement for compatible round air-cleaner housings, using white paper filter media to filter incoming air before it reaches the carburetor or intake.
At 10" outside diameter, 2" height, and a 5 1/8" neck/inlet diameter, this element is sized for single 4-barrel carburetor setups. Its low-profile 2" height makes it a common fit for street and muscle car builds where hood clearance is tight — but confirm your available clearance before installing, especially on lower-clearance engine bays.
Matching fitment on this part takes more than just outside diameter: elements with the same 10" OD can still have different center-hole (neck/inlet) sizes, so confirm both dimensions against your existing air-cleaner housing before ordering. This is a paper-media element, so it's a replace-only part rather than a washable one.
Applications
Fits compatible 10" round air-cleaner housings with a 5 1/8" neck/inlet diameter; commonly used on single 4-barrel carburetor setups, including low-profile street and muscle car builds with limited hood clearance.
Sizing
10" outside diameter, 2" height, 5 1/8" neck/inlet diameter. Match all three dimensions — filters sharing the same OD can still differ in neck/inlet size.
Specs
| Shape | Round |
| Filter Material | White Paper |
| Outside Diameter | 10" |
| Filter Height | 2" |
Engine Fitment
COMPATIBLE WITH
Universal — service replacement for round air-cleaner assemblies sized 10" OD x 2" H with a 5⅛" neck/inlet diameter.
NOTES
• Match element outside diameter, height, and inlet/neck diameter to your existing air-cleaner housing before ordering — filters with the same OD can still have different center-hole sizes.
• White paper media; not washable/reusable — replace, don't clean.
• Low-profile height (2") — verify hood clearance before installation, especially on tight engine bays.
COMMON VEHICLE APPLICATIONS
Low-profile street/muscle car builds with limited hood clearance
Routine service replacement for 10" round air-cleaner assemblies
Single 4-barrel carburetor setups
Q&A
Will this fit any 10" round air-cleaner housing?
Only if the 5⅛-inch neck (inlet) diameter also matches. While the outside diameter is 10 inches, other 10-inch air cleaner elements may use different center-hole sizes. Verify both dimensions before ordering.
Is this a good fit for a low-clearance engine bay?
Yes. With a 2-inch height, this is a low-profile filter element commonly used where hood clearance is limited. Be sure to verify your vehicle's available clearance before installation.
What carburetor setup is this sized for?
This filter is designed for single 4-barrel carburetors with a 5⅛-inch neck (air horn) diameter.
Is this filter washable and reusable?
No. This is a white paper filter element designed for replacement when dirty. It is not intended to be cleaned and reused.
How often should this filter be replaced?
Replace the filter when it becomes visibly dirty, airflow is restricted, or according to your normal maintenance schedule. There is no fixed replacement interval for this filter.
Does this filter work for street use, or is it race-only?
Check the emissions information provided with this listing to determine whether the filter is intended for street-driven, emissions-controlled vehicles or off-road use only.
Emissions Notice
This Top Street Performance (TSP) product is designed for racing and off-road competition use only. It is not legal for use on public roads or emissions-controlled vehicles and does not comply with federal, state, or local emissions regulations. The buyer assumes all responsibility for legal use and installation.
What is a Emissions-Controlled Vehicle?
"An emissions-controlled vehicle is any vehicle equipped with a factory-installed emissions control system designed to reduce air pollution. These systems include catalytic converters, oxygen sensors, EGR (Exhaust Gas Recirculation) valves, and diesel particulate filters (DPF). Most vehicles manufactured after 1975 are considered emissions-controlled and must comply with federal and state emissions laws when used on public roads."
10" x 2" Round Paper Air Filter
When a round air-cleaner element gets dirty, restricted, or worn out, replacing it restores the airflow and filtration the assembly was designed for. This 10" round paper element is built as a direct service replacement for compatible round air-cleaner housings, using white paper filter media to filter incoming air before it reaches the carburetor or intake.
At 10" outside diameter, 2" height, and a 5 1/8" neck/inlet diameter, this element is sized for single 4-barrel carburetor setups. Its low-profile 2" height makes it a common fit for street and muscle car builds where hood clearance is tight — but confirm your available clearance before installing, especially on lower-clearance engine bays.
Matching fitment on this part takes more than just outside diameter: elements with the same 10" OD can still have different center-hole (neck/inlet) sizes, so confirm both dimensions against your existing air-cleaner housing before ordering. This is a paper-media element, so it's a replace-only part rather than a washable one.
Applications
Fits compatible 10" round air-cleaner housings with a 5 1/8" neck/inlet diameter; commonly used on single 4-barrel carburetor setups, including low-profile street and muscle car builds with limited hood clearance.
Sizing
10" outside diameter, 2" height, 5 1/8" neck/inlet diameter. Match all three dimensions — filters sharing the same OD can still differ in neck/inlet size.
COMPATIBLE WITH
Universal — service replacement for round air-cleaner assemblies sized 10" OD x 2" H with a 5⅛" neck/inlet diameter.
NOTES
• Match element outside diameter, height, and inlet/neck diameter to your existing air-cleaner housing before ordering — filters with the same OD can still have different center-hole sizes.
• White paper media; not washable/reusable — replace, don't clean.
• Low-profile height (2") — verify hood clearance before installation, especially on tight engine bays.
COMMON VEHICLE APPLICATIONS
Low-profile street/muscle car builds with limited hood clearance
Routine service replacement for 10" round air-cleaner assemblies
Single 4-barrel carburetor setups
SPECIFICATIONS:
Shape: Round
Filter Material: White Paper
Outside Diameter: 10"
Filter Height: 2"
