-6AN Female Swivel to 3/8 in. Push-on Hose End Fitting

• -6AN female swivel end connects to 3/8" push-on hose for secure fuel routing

• Swivel design eases hose alignment during assembly without twisting the line

• Compatible with any 3/8" ID push-on hose using a -6AN threaded connection

• Sold individually — confirm hose size and AN thread size before ordering

This -6AN female swivel fitting connects to 3/8" push-on hose, giving custom fuel and fluid plumbing a serviceable connection point between AN-threaded components and push-on hose ends. The swivel design allows the fitting to rotate during assembly, easing hose alignment without twisting the hose itself.

This is a universal AN fitting, sized to -6AN thread and 3/8" push-on hose — fitment depends on matching these two dimensions, not on vehicle make or model. Confirm your hose's inside diameter and the AN thread size on the mating component before ordering, since AN fitting sizes are not interchangeable with each other despite looking similar.

Common Applications
Used in custom fuel line assemblies, EFI conversions, return line plumbing, and general performance fuel or fluid routing where a -6AN threaded connection needs to transition to 3/8" push-on hose.

Installation
Push the 3/8" hose fully onto the barbed end of the fitting before clamping, and confirm the -6AN threaded end matches your mating component's thread size and sealing style (O-ring vs. flare) before final assembly. The swivel end allows rotation for hose alignment without needing to twist the hose during installation.

What hose size does this fitting use?
This fitting connects 3/8" inside-diameter push-on hose to a -6AN female swivel connection.

Does this fitting swivel, or is it fixed?
The -6AN female end swivels, allowing the fitting to rotate during assembly for easier hose alignment without twisting the hose itself.

What material is this fitting made from?
The material is not currently specified in the listing. Confirm with TSP if material or fluid compatibility is important for your application.

Is this fitting sold as a single piece or in a set?
This fitting is sold individually — one fitting per purchase.

Can I use this for fuel, oil, or coolant lines?
Potentially, but compatibility depends on the fitting material, seals, hose, operating temperature, and pressure. Confirm this specific fitting is rated for your intended fluid and application before use.

Do I need a specific clamp for the push-on end?
Use a clamp compatible with your 3/8" hose and its construction if the hose manufacturer requires one. Verify the recommended clamp style for the specific hose being used rather than relying on hose diameter alone.