{"title":"LS\/LT Ignition and Power","description":"\u003cp\u003eShop high-performance LS and LT ignition and electrical components designed to deliver strong spark, reliable power delivery, and improved engine performance. Built for durability and easy installation, these components help ensure consistent combustion and dependable operation. Ideal for LS and LT engine swaps, street builds, and high-performance applications.\u003c\/p\u003e\n\u003c!--split--\u003e\n\u003cp\u003eThe ignition and electrical system is a critical part of any LS or LT engine, responsible for delivering consistent spark and managing the electrical power required for proper engine operation. Modern GM LS (Gen III\/IV) and LT (Gen V) engines utilize advanced coil-near-plug ignition systems that provide precise spark timing and improved combustion efficiency.\u003c\/p\u003e\n\u003cp\u003eLS and LT ignition systems eliminate traditional distributors, instead using individual ignition coils for each cylinder. This design allows for more accurate spark control, increased reliability, and better overall engine performance. Proper ignition timing and strong spark energy are essential for maximizing horsepower, throttle response, and fuel efficiency.\u003c\/p\u003e\n\u003cp\u003eHigh-performance ignition components such as upgraded coils, spark plug wires, and wiring harnesses help improve spark output and ensure consistent voltage delivery. These upgrades are especially important in modified engines where increased power levels demand stronger and more reliable ignition performance.\u003c\/p\u003e\n\u003cp\u003eElectrical components also play a key role in LS and LT engine operation. Wiring harnesses, sensors, and charging system components work together to support fuel delivery, ignition timing, and engine management systems. In LS swap applications, proper electrical integration is essential to achieve reliable starting, smooth operation, and long-term performance.\u003c\/p\u003e\n\u003cp\u003eUpgrading LS and LT ignition and electrical systems helps reduce misfires, improve engine efficiency, and support high-performance builds. Whether you're working on a stock replacement, a performance upgrade, or a complete engine swap, choosing the right ignition and electrical components ensures consistent power delivery and dependable operation.\u003c\/p\u003e\n\u003cp\u003eLS and LT ignition and power components are especially important in performance builds where precision and reliability are critical. From daily drivers to race applications, a properly designed ignition and electrical system helps maximize engine performance and ensures your build runs at its best.\u003c\/p\u003e\n\u003ch3\u003eShop Related LS \u0026amp; LT Components\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/ls-lt-air-and-fuel-delivery\"\u003eLS \/ LT Air \u0026amp; Fuel Delivery\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/gm-ls-lt-intake-manifolds\"\u003eLS \/ LT Intake Manifolds\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/ls-lt-engine-components\"\u003eLS \/ LT Engine Components\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/ls-lt-front-drive-systems\"\u003eLS \/ LT Front Drive Systems\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/ls-lt-electrical-wiring\"\u003eLS \/ LT Electrical Wiring\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"gm-05-18-ls-high-performance-ignition-coil-single-red","title":"GM '05-'18 LS High Performance Ignition Coil - Single - Red","description":"\u003cp\u003eGive the ignition system a fresh spark source with a performance ignition coil designed for dependable voltage output.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpark Energy\u003c\/strong\u003e\u003cbr\u003eHigh-output spark energy helps improve ignition consistency during startup, idle, and acceleration.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIgnition Coil Construction\u003c\/strong\u003e\u003cbr\u003ePerformance-style construction helps manage heat while maintaining dependable ignition performance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003e0.5 Ohms primary resistance helps match ignition system requirements. Blade terminals support ignition wire connection. Verify mounting style and ignition compatibility before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS-BASED)\u003cbr\u003e• 4.8 L \/ 293 in3 (LR4, LY2, L20)\u003cbr\u003e• 5.3 L \/ 325 in3 (LM7, L59, LM4, L33, LC9, LH6, LH8, LH9, LMF, LMG, LY5, LS4)\u003cbr\u003e• 5.7 L \/ 346 in3 (LS1, LS6)\u003cbr\u003e• 6.0 L \/ 364 in3 (LQ4, LQ9, LS2, L76, LY6, L96, LFA, LZ1)\u003cbr\u003e• 6.2 L \/ 376 in3 (LS3, L92, L94, L9H, L99, LSA, LS9)\u003cbr\u003e• 7.0 L \/ 427 in3 (LS7)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eChevrolet Corvette LS2 \/ LS3 \/ LS7 \/ LS9 applications\u003cbr\u003eChevrolet Camaro LS3 \/ L99 applications\u003cbr\u003ePontiac G8 \/ GTO and Cadillac CTS-V LS-based applications\u003cbr\u003eLS swap builds using matching coil connector and bracket style\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eVerify coil connector style, coil bracket style, and wiring harness compatibility before installation.\u003cbr\u003e8 coils are required for V8 applications when replacing a full set.\u003cbr\u003eFor LS swap use, match the coil connector and bracket style to the harness and valve cover setup.\u003cbr\u003e\u003cbr\u003e\u003cstrong data-start=\"0\" data-end=\"19\" data-is-only-node=\"\"\u003eSPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003eCoil Shape: Square\u003cbr\u003eCoil Type: Coil Pack\u003cbr\u003eCoil Wire Included: No\u003cbr\u003eColor: Red\u003cbr\u003eConnector Gender: Female\u003cbr\u003eGrade Type: Performance\u003cbr\u003eIgnition Type: Electronic\u003cbr\u003eInductance: 2.7 mH\u003cbr\u003eInternal Construction: Epoxy\u003cbr\u003eMount Type: Bolt on\u003cbr\u003eMounting Bracket Included: No\u003cbr\u003eMounting Hardware Included: No\u003cbr\u003eMounting Hole Quantity: 2\u003cbr\u003eOil Filled: No\u003cbr\u003ePeak Current: 220 mA\u003cbr\u003ePrimary Resistance: 0.5 Ohms\u003cbr\u003eQuantity: 1\u003cbr\u003eRequires External Resistor: No\u003cbr\u003eSecondary Resistance: 2,000 Ohms\u003cbr\u003eSpark Duration: 300 ms\u003cbr\u003eTerminal Gender: Female\u003cbr\u003eTerminal Quantity: 2\u003cbr\u003eTerminal Type: Blade\u003cbr\u003eTurns Ratio: 75:1\u003cbr\u003eVoltage: 40,000 V\u003cbr\u003e\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49760230900008,"sku":"81015","price":54.32,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81015-8-2-600_1.jpg?v=1732636829"},{"product_id":"gm-99-07-ls-truck-style-high-performance-ignition-coil-set-of-8-red","title":"GM '99-'07 LS Truck Style High Performance Ignition Coil - Set of 8 - Red","description":"Add a cleaner, more dependable ignition signal with an ignition coil built around stronger spark output and reliable operation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpark Energy\u003c\/strong\u003e\u003cbr\u003eHigh-output spark energy helps improve ignition consistency during startup, idle, and acceleration.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIgnition Coil Construction\u003c\/strong\u003e\u003cbr\u003ePerformance-style construction helps manage heat while maintaining dependable ignition performance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003e0.5 Ohms primary resistance helps match ignition system requirements. Blade terminals support ignition wire connection. Verify mounting style and ignition compatibility before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS-BASED TRUCK)\u003cbr\u003e• 4.8 L \/ 293 in3 (LR4)\u003cbr\u003e• 5.3 L \/ 325 in3 (LM7, L59, LM4, L33)\u003cbr\u003e• 6.0 L \/ 364 in3 (LQ4, LQ9)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eChevrolet Silverado \/ GMC Sierra 1999-2007 Classic LS-based trucks\u003cbr\u003eChevrolet Tahoe \/ Suburban and GMC Yukon LS-based SUVs\u003cbr\u003eChevrolet Express \/ GMC Savana LS-based vans\u003cbr\u003eTruck LS swap builds using early truck-style coil packs\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eVerify early truck-style coil connector, bracket style, and harness compatibility before installation.\u003cbr\u003e8 coils are required for V8 applications when replacing a full set.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eCoil Shape: Square\u003cbr\u003eCoil Type: Coil Pack\u003cbr\u003eCoil Wire Included: No\u003cbr\u003eColor: Red\u003cbr\u003eConnector Gender: Female\u003cbr\u003eGrade Type: Performance\u003cbr\u003eIgnition Type: Electronic\u003cbr\u003eInductance: 2.7 mH\u003cbr\u003eInternal Construction: Epoxy\u003cbr\u003eMount Type: Bolt on\u003cbr\u003eMounting Bracket Included: Yes\u003cbr\u003eMounting Hardware Included: No\u003cbr\u003eMounting Hole Quantity: 2\u003cbr\u003eOil Filled: No\u003cbr\u003ePeak Current: 220 mA\u003cbr\u003ePrimary Resistance: 0.5 Ohms\u003cbr\u003eQuantity: Set of 8\u003cbr\u003eRequires External Resistor: No\u003cbr\u003eSecondary Resistance: 2,000 Ohms\u003cbr\u003eSpark Duration: 300 ms\u003cbr\u003eTerminal Gender: Female\u003cbr\u003eTerminal Quantity: 2\u003cbr\u003eTerminal Type: Blade\u003cbr\u003eTurns Ratio: 75:1\u003cbr\u003eVoltage: 40,000 V\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49760380092712,"sku":"81016-8","price":391.12,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81016-8-1-600_9ba0bf93-f489-4873-9edc-2a9fdccc6c33.jpg?v=1736983758"},{"product_id":"gm-ls-ignition-coil-relocation-brackets-natural","title":"GM LS Ignition Coil Relocation Brackets - Natural","description":"\u003cp\u003eThis GM LS Ignition Coil Relocation Brackets - Natural is designed for GM LS engine and accessory drive applications that need a clean, rigid ignition coil mounting solution. It helps position the component correctly while improving the finished look and serviceability of the engine bay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication-Specific Mounting\u003c\/strong\u003e\u003cbr\u003e\nThe bracket configuration is built around the listed platform and component layout, helping align the ignition coil with the correct belt, cable, or mounting path.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDurable Bracket Construction\u003c\/strong\u003e\u003cbr\u003e\nManufactured from aluminum, this bracket is designed to handle normal engine vibration, accessory load, and repeated service use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClean Engine Bay Finish\u003c\/strong\u003e\u003cbr\u003e\nThe finished appearance gives the installation a cleaner, more complete look for street, show, and performance builds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003e\n\u003cstrong\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS BASED)\u003c\/strong\u003e\u003cbr\u003e\n• 4.8 L \/ 293 in3 (LR4, LY2, L20)\u003cbr\u003e\n• 5.3 L \/ 325 in3 (LM7, L59, LM4, L33, LC9, LH6, LY5, LMG)\u003cbr\u003e\n• 6.0 L \/ 364 in3 (LQ4, LQ9, LS2, LY6, L76, L96)\u003cbr\u003e\n• 6.2 L \/ 376 in3 (LS3, L92, L99, LS9)\u003cbr\u003e\n• 7.0 L \/ 427 in3 (LS7)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChevrolet Silverado 1500 \/ 2500 \/ 3500\u003c\/li\u003e\n\u003cli\u003eGMC Sierra 1500 \/ 2500 \/ 3500\u003c\/li\u003e\n\u003cli\u003eChevrolet Tahoe \/ Suburban\u003c\/li\u003e\n\u003cli\u003eGMC Yukon \/ Yukon XL\u003c\/li\u003e\n\u003cli\u003eChevrolet Camaro \/ Corvette (LS equipped)\u003c\/li\u003e\n\u003cli\u003ePontiac GTO \/ G8 (LS equipped)\u003c\/li\u003e\n\u003c\/ul\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\nCoil Style: Delco #D510C\/ #81015 Or Delco #D585\/ #81016\u003cbr\u003e\nBracket Material: Aluminum\u003cbr\u003e\nQuantity: 2\u003cbr\u003e\nIncluded: Spacers\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562043154728,"sku":"81020","price":28.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81020_1-1600.jpg?v=1732636858"},{"product_id":"gm-ad244-style-high-output-220-amp-alternator-chrome","title":"GM AD244 Style High Output 220 Amp Alternator - Chrome","description":"\u003cp\u003e\u003cspan\u003eUpgrade your LS truck charging system with this GM AD244 Style High Output 220 Amp Alternator engineered to deliver exceptional charging performance for vehicles with increased electrical demands. Designed for compatible GM LS truck accessory drive systems, this alternator provides the charging capacity needed to support modern performance upgrades, electrical accessories, and high-demand vehicle systems.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe 220 amp output provides a substantial increase over many factory charging systems and helps support electric cooling fans, electronic fuel injection systems, electric fuel pumps, aftermarket ignition systems, high-output lighting, air conditioning systems, audio equipment, winches, off-road accessories, and other power-hungry electrical components. Increased charging capacity helps maintain stable system voltage during idle, cruising, towing, and demanding operating conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBuilt using the GM AD244 case design commonly found on many 1999-2006 GM truck applications, this alternator is designed for use with compatible LS truck accessory drive systems and factory-style AD244 mounting brackets. It is commonly used on 4.8L, 5.3L, 5.7L, 6.0L, 6.5L Diesel, 6.6L Duramax, and 8.1L applications where increased charging capacity is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe internally regulated design helps maintain consistent charging system performance while utilizing the factory-style 4-pin electrical connection commonly found on AD244-equipped applications. Unlike one-wire alternators, this design is intended to integrate with compatible factory-style charging system controls and wiring configurations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEquipped with a 6-groove serpentine pulley and finished in bright chrome, this alternator combines show-quality appearance with dependable charging capability. Whether you're upgrading an LS-powered truck, supporting additional electrical accessories, building a tow vehicle, completing an LS swap with truck accessories, or replacing a factory AD244 alternator, this high-output alternator delivers the charging performance and reliability needed for demanding applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e220 Amp Charging Performance\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe 220 amp output provides the charging capacity needed for electric cooling fans, EFI systems, electric fuel pumps, aftermarket ignition systems, lighting upgrades, audio equipment, off-road accessories, and other high-demand electrical components. High-output charging helps maintain stable system voltage under increased electrical loads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGM AD244 Case Design\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eBuilt using the AD244 alternator platform commonly found on many 1999-2006 GM truck applications. Designed for compatible LS truck accessory drive systems utilizing AD244 mounting locations, factory-style brackets, and factory-style charging system connections.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eGM LS TRUCK ACCESSORY DRIVE SYSTEMS\u003cbr\u003eGM LS-Based 4.8L, 5.3L, 5.7L, and 6.0L Engines\u003cbr\u003eGM 4.3L V6\u003cbr\u003eGM 6.5L Diesel\u003cbr\u003eDuramax 6.6L Diesel\u003cbr\u003eGM 8.1L \/ 496 Big Block\u003cbr\u003eCompatible LS Truck Accessory Drive Systems\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eChevrolet Tahoe\u003cbr\u003eChevrolet Suburban\u003cbr\u003eGMC Sierra\u003cbr\u003eGMC Yukon\u003cbr\u003eChevrolet Express Vans\u003cbr\u003eGMC Savana Vans\u003cbr\u003eLS Engine Swaps Using Truck Spacing\u003cbr\u003eTow Vehicles\u003cbr\u003eOff-Road Builds\u003c\/p\u003e\n\u003cp\u003eNOTES\u003cbr\u003eDesigned for AD244-style alternator applications\u003cbr\u003eUtilizes factory-style 4-pin connector\u003cbr\u003eNot compatible with 2-pin harnesses\u003cbr\u003eVerify truck vs. car accessory spacing before ordering\u003cbr\u003eVerify mounting brackets and pulley alignment prior to installation\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eAC Service Tap: No\u003cbr\u003eAmperage Rating: 220 A\u003cbr\u003eBrushless: No\u003cbr\u003eCase Circumference: 17.900 in.\u003cbr\u003eCase Color: Silver\u003cbr\u003eCase Material: Aluminum\u003cbr\u003eDistance Between Mounting Feet: 4.100 in.\u003cbr\u003eExternal Fan Included: Yes\u003cbr\u003eExternal Regulator Included: No\u003cbr\u003eFamily: AD-244\u003cbr\u003eFan Type: External\u003cbr\u003eFinish: Chrome\u003cbr\u003eGround Type: Case ground\u003cbr\u003eMounting Type: Split Mount\u003cbr\u003eOne Wire Capable: No\u003cbr\u003eOutside Pulley Diameter: 2.500 in.\u003cbr\u003ePlug Clock Rear View Main Mounting Ear at 6 O Clock: 10 o'clock\u003cbr\u003ePlug Type: 4-pin\u003cbr\u003ePulley Belt Type: Serpentine\u003cbr\u003ePulley Groove Quantity: 6\u003cbr\u003ePulley Included: Yes\u003cbr\u003eRegulator Type: Internal\u003cbr\u003eRotation Direction: Clockwise\u003cbr\u003eSplit Mounting Foot Overall Inner Spacing: 4.100\u003cbr\u003eSplit Mounting Foot Overall Outside Spacing: 5.100\u003cbr\u003eTerminal Quantity: 5\u003cbr\u003eVoltage: 12 VDC\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562067992872,"sku":"ES1024C","price":286.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/es1024-1-1600.jpg?v=1732637251"},{"product_id":"gm-cs130d-style-high-output-180-amp-alternator-chrome","title":"GM CS130D Style High Output 180 Amp Alternator - Chrome","description":"\u003cp\u003e\u003cspan\u003eBuilt using the GM CS130D alternator platform, this unit is designed for compatible LS-based charging systems utilizing factory-style mounting locations and serpentine accessory drives. The CS130D design is commonly found on GM LS-powered performance vehicles and remains a popular upgrade for enthusiasts seeking increased charging capacity while retaining factory-style fitment and wiring compatibility.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCompatible with many GM LS Series V8 applications, including LS1-equipped vehicles and compatible 1998-2002 Chevrolet Camaro and Pontiac Firebird models, this alternator is ideal for vehicles equipped with electric cooling fans, upgraded fuel systems, aftermarket audio equipment, performance ignition systems, and other power-hungry accessories. The factory-style 4-pin connection allows integration with compatible factory-style charging system wiring while maintaining proper charging system operation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe internal voltage regulator helps maintain consistent charging performance under varying electrical loads, making this alternator well-suited for both daily-driven and performance-oriented applications. Unlike many universal alternators, the CS130D platform is designed around modern GM charging system architecture and serpentine accessory drives.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFinished in bright chrome, this alternator combines show-quality appearance with dependable charging capability. Whether you're replacing a factory LS alternator, upgrading a Camaro or Firebird charging system, supporting additional electrical accessories, or increasing charging capacity for a modified LS-powered vehicle, this 180 amp alternator delivers the performance and reliability needed for demanding applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e180 Amp Charging Performance\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe 180 amp output provides the charging capacity needed for electric cooling fans, EFI systems, electric fuel pumps, upgraded ignition systems, lighting upgrades, audio equipment, electric water pumps, and other high-demand electrical accessories. High-output charging helps maintain stable system voltage under increased electrical loads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGM CS130D Alternator Design\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eBuilt using the GM CS130D platform commonly found on LS-powered applications. The Factory-style design supports compatible factory mounting locations, serpentine accessory drives, and factory-style charging system connections.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eGM LS Series V8 Engines\u003cbr\u003eDirect fit for CS130D alternator used in Camaro and Firebird from 1998-2002.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eGM LS Series Camaro and Firebird applications using compatible CS130D mounting, connector, pulley alignment, and charging-system layout.\u003c\/p\u003e\n\u003cp\u003eNOTES\u003cbr\u003e• Designed for CS130D Alternator Applications\u003cbr\u003e• Factory-Style 4-Pin Connector\u003cbr\u003e• Internal Voltage Regulator\u003cbr\u003e• Designed for Serpentine Belt Systems\u003cbr\u003e• Verify Mounting Configuration Before Ordering\u003cbr\u003e• Verify Pulley Alignment and Connector Compatibility\u003cbr\u003e• Fitment Depends on Alternator Type and Charging System Configuration\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eAC Service Tap: No\u003cbr\u003eAmperage Rating: 180 A\u003cbr\u003eBrushless: No\u003cbr\u003eCase Circumference: 16.000 in.\u003cbr\u003eCase Color: Silver\u003cbr\u003eCase Material: Aluminum\u003cbr\u003eDistance Between Mounting Feet: 6.610 in.\u003cbr\u003eExternal Fan Included: Yes\u003cbr\u003eExternal Regulator Included: No\u003cbr\u003eFamily: CS130D\u003cbr\u003eFan Type: External\u003cbr\u003eFinish: Chrome\u003cbr\u003eGround Type: Case ground\u003cbr\u003eMounting Type: Split Mount\u003cbr\u003eOne Wire Capable: No\u003cbr\u003eOutside Pulley Diameter: 2.250 in.\u003cbr\u003ePlug Clock Rear View Main Mounting Ear at 6 O Clock: 5 o'clock\u003cbr\u003ePlug Type: 4-pin\u003cbr\u003ePulley Belt Type: Serpentine\u003cbr\u003ePulley Groove Quantity: 6\u003cbr\u003ePulley Included: Yes\u003cbr\u003eRegulator Type: Internal\u003cbr\u003eRotation Direction: Clockwise\u003cbr\u003eSplit Mounting Foot Overall Inner Spacing: 6.610\u003cbr\u003eSplit Mounting Foot Overall Outside Spacing: 7.610\u003cbr\u003eTerminal Quantity: 5\u003cbr\u003eVoltage: 12 VDC\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562068910376,"sku":"ES1025C","price":286.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/es1025c-1-1600.jpg?v=1732637259"},{"product_id":"gm-ls-3-0-hp-high-torque-starter-black","title":"GM LS 3.0 HP High Torque Starter - Black","description":"\u003cp\u003e\u003cspan\u003eUpgrade your LS engine's starting system with a high-torque mini starter engineered for GM Gen III and Gen IV LS-based V8 applications. Featuring a powerful 3.0 horsepower motor and 3.75:1 gear reduction ratio, this starter delivers dependable cranking performance for street, performance, and LS swap builds.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCompatible with many 4.8L, 5.3L, 5.7L, and 6.0L LS engine combinations, including popular LS1, LS2, LS6, LQ4, and LQ9 applications, this starter is designed to provide reliable starting power while maintaining a compact footprint. The gear reduction design helps increase torque output for dependable hot and cold starts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe compact Tilton-style housing provides additional clearance around headers, oil pans, steering components, and other tight engine bay areas where traditional starters can create fitment challenges. An adjustable billet aluminum mounting block allows easier starter positioning and installation flexibility for a wide variety of LS-powered vehicles and engine swap projects.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFinished in a black housing, this starter adds a polished appearance to engine compartments while delivering the cranking power needed for performance-oriented LS applications. Whether replacing a worn factory starter or upgrading an LS swap, this high-torque mini starter delivers the power, clearance, and reliability needed for dependable engine starts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003eCompact Mini Starter Design\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe offset Tilton-style housing helps create additional clearance around headers, oil pans, steering linkage, and other engine bay components. Its compact footprint makes it a popular upgrade for performance builds, restoration projects, and LS engine swaps.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Torque Starting Performance\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe 3.0 HP motor and 3.75:1 gear reduction ratio work together to provide strong cranking performance for GM LS-based engine combinations. The gear reduction design helps improve starter efficiency while maintaining a lightweight, compact package.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS-BASED)\u003cbr\u003e• 4.8 L \/ 293 in3 (LR4)\u003cbr\u003e• 5.3 L \/ 325 in3 (L33, L59, LM4, LM7)\u003cbr\u003e• 5.7 L \/ 346 in3 (LS1, LS6)\u003cbr\u003e• 6.0 L \/ 364 in3 (LQ4, LQ9, LS2)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eChevrolet Chevelle \/ Nova \/ Camaro\u003cbr\u003eChevrolet C10 \/ K10 Trucks\u003cbr\u003eChevrolet Impala \/ El Camino\u003cbr\u003eStreet rod, muscle car, and custom Chevy builds\u003cbr\u003e\u003cbr\u003eNOTES\u003cbr\u003eDesigned for GM Gen III and Gen IV LS-based engine platforms. Verify oil pan, header, flexplate, and mounting clearance before installation. Mini starter housing helps improve clearance around headers and oil pans.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003eStarter Style: Mini\u003cbr\u003eStarter Type: Tilton\u003cbr\u003eColor: Black\u003cbr\u003eAdjustable Mounting Block: Yes\u003cbr\u003eStarter Rotation: Standard\u003cbr\u003eMaximum Compression Ratio: 11.0:1\u003cbr\u003eGear Reduction Ratio: 3.75:1\u003cbr\u003eHorsepower: 3\u003cbr\u003eStarter Housing Material: Cast Aluminum\u003cbr\u003eMounting Block Material: Billet Aluminum\u003cbr\u003e\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562139984168,"sku":"JM7002BK","price":203.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm7002bk-a.jpg?v=1732638640"},{"product_id":"gm-ls-v8-1-9-hp-mini-starter-red","title":"GM LS V8 1.9 HP Mini Starter - Red","description":"\u003cp\u003e\u003cspan\u003eUpgrade your LS swap or LS-powered vehicle with a compact high-torque mini starter engineered for GM Gen III and Gen IV LS-based V8 applications. Featuring a 1.9 horsepower motor and 4.0:1 gear reduction ratio, this starter delivers dependable cranking performance for street, performance, and custom engine swap builds.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCompatible with many 4.8L, 5.3L, 5.7L, and 6.0L LS engine combinations, including popular LR4, LM4, LM7, L33, L59, LS1, LS6, LQ4, and LQ9 applications, this starter is designed to provide reliable starting power while maintaining a compact footprint. The gear reduction design helps increase torque output for dependable hot and cold starts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe compact Nippondenso-style housing provides additional clearance around headers, oil pans, steering components, and chassis modifications commonly encountered in LS swap projects. An adjustable billet aluminum mounting block allows easier starter positioning and installation flexibility across a wide range of LS-powered vehicles, muscle cars, trucks, street rods, and custom builds.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRated for engine combinations up to approximately 12.0:1 compression ratio, this starter is engineered to deliver reliable cranking power for demanding street and performance applications. The red finish adds a polished appearance while maintaining the durability needed for long-term use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhether you're replacing a factory LS starter, upgrading a performance build, or completing an LS engine swap, this high-torque mini starter delivers the power, clearance, and reliability needed for dependable engine starts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompact Mini Starter Design\u003c\/strong\u003e\u003cbr\u003eThe Nippondenso-style housing helps create additional clearance around headers, oil pans, steering linkage, and chassis components commonly encountered in LS swap projects. Its compact footprint makes it a popular upgrade for LS-powered muscle cars, trucks, street rods, and custom builds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Torque Starting Performance\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe 1.9 HP motor and 4.0:1 gear reduction ratio work together to provide strong cranking performance for GM LS-based engine combinations. Gear reduction technology helps improve starter efficiency while maintaining a lightweight compact package.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS-BASED)\u003cbr\u003e• 4.8 L \/ 294 in3\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 5.7 L \/ 346 in3 commonly referred to as 350 in3\u003cbr\u003e• 6.0 L \/ 364 in3\u003cbr\u003e\u003cbr\u003eNOTE: Fits 168-tooth flywheels\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eChevrolet Chevelle \/ Nova \/ Camaro\u003cbr\u003eChevrolet C10 \/ K10 Trucks\u003cbr\u003eChevrolet Impala \/ El Camino\u003cbr\u003eStreet rod, muscle car, and custom Chevy builds\u003cbr\u003e\u003cbr\u003eNOTES\u003cbr\u003eFits 168-tooth flywheel applications\u003cbr\u003eAdjustable billet aluminum mounting block included\u003cbr\u003eStandard rotation design\u003cbr\u003eDesigned for GM Gen III and Gen IV LS-based engine platforms\u003cbr\u003eVerify flywheel tooth count, oil pan, header, and flexplate clearance before installation\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003eStarter Style: Mini\u003cbr\u003eStarter Type: Compact\u003cbr\u003eColor: Red\u003cbr\u003eAdjustable Mounting Block: Yes\u003cbr\u003eStarter Rotation: Standard\u003cbr\u003eMaximum Compression Ratio: 12.0:1\u003cbr\u003eGear Reduction Ratio: 4.0:1\u003cbr\u003eHorsepower: 1.9\u003cbr\u003eStarter Housing Material: Cast Aluminum\u003cbr\u003eMounting Block Material: Billet Aluminum\u003cbr\u003e\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562140475688,"sku":"JM7009R","price":230.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm7007r-1-600_1.jpg?v=1732638654"},{"product_id":"ls1-ls6-billet-aluminum-coil-brackets","title":"GM LS1\/LS6 Billet Aluminum Coil Brackets","description":"\u003cp\u003eThis GM LS1\/LS6 Billet Aluminum Coil Brackets is designed for GM LS engine and accessory drive applications that need a clean, rigid accessory mounting solution. It helps position the component correctly while improving the finished look and serviceability of the engine bay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication-Specific Mounting\u003c\/strong\u003e\u003cbr\u003e\nThe bracket configuration is built around the listed platform and component layout, helping align the accessory with the correct belt, cable, or mounting path.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDurable Bracket Construction\u003c\/strong\u003e\u003cbr\u003e\nManufactured from aluminum, this bracket is designed to handle normal engine vibration, accessory load, and repeated service use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClean Engine Bay Finish\u003c\/strong\u003e\u003cbr\u003e\nThe finished appearance gives the installation a cleaner, more complete look for street, show, and performance builds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003e\n\u003cstrong\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS BASED)\u003c\/strong\u003e\u003cbr\u003e\n5.7 L \/ 346 in3 commonly referred to as \"350\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE Direct replacement for LS1 and LS6 car application brackets.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChevrolet Silverado 1500 \/ 2500 \/ 3500\u003c\/li\u003e\n\u003cli\u003eGMC Sierra 1500 \/ 2500 \/ 3500\u003c\/li\u003e\n\u003cli\u003eChevrolet Tahoe \/ Suburban\u003c\/li\u003e\n\u003cli\u003eGMC Yukon \/ Yukon XL\u003c\/li\u003e\n\u003cli\u003eChevrolet Camaro \/ Corvette (LS equipped)\u003c\/li\u003e\n\u003cli\u003ePontiac GTO \/ G8 (LS equipped)\u003c\/li\u003e\n\u003c\/ul\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\nCoil Shape: Square\u003cbr\u003e\nCoil Style: Delco D580\u003cbr\u003e\nCoil Type: Coil Pack\u003cbr\u003e\nMaterial: Aluminum\u003cbr\u003e\nMounting Hardware Included: Yes\u003cbr\u003e\nQuantity: 2\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562193527080,"sku":"81005","price":103.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81005-b_1.jpg?v=1732639968"},{"product_id":"gm-ls-ignition-coil-extension-cable-24","title":"GM LS Ignition Coil Extension Cable","description":"Help stabilize ignition performance with a replacement coil built for consistent voltage delivery and dependable operation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpark Energy\u003c\/strong\u003e\u003cbr\u003eHigh-output spark energy helps improve ignition consistency during startup, idle, and acceleration.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIgnition Coil Construction\u003c\/strong\u003e\u003cbr\u003ePerformance-style construction helps manage heat while maintaining dependable ignition performance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003eVerify mounting style and ignition compatibility before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS BASED)\u003cbr\u003e• 4.8 L \/ 293 in3\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 5.7 L \/ 346 in3 commonly referred to as 350\u003cbr\u003e• 6.0 L \/ 364 in3\u003cbr\u003e• 6.2 L \/ 376 in3\u003cbr\u003e• 7.0 L \/ 427 in3\u003cbr\u003e\u003cbr\u003eNOTE: This cable is intended for a single bank of four ignition coils.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eClassic V8 ignition upgrades\u003cbr\u003eStreet rod and muscle car ignition systems\u003cbr\u003eDistributor service and ignition refresh projects\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eVerify wiring polarity, ignition box compatibility, and mounting style before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eCable Type: Ignition Coil Extension Harness\u003cbr\u003eEnd 1 Terminal Quantity: 1\u003cbr\u003eEnd 2 Terminal Quantity: 1\u003cbr\u003eLength: 24\"\u003cbr\u003eQuantity: 1\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562194542888,"sku":"81021","price":27.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81021-a.jpg?v=1732639992"},{"product_id":"gm-05-18-ls-high-performance-ignition-coils-with-stock-style-brackets-natural","title":"GM '05-'18 LS High Performance Ignition Coils with Stock Style Brackets - Natural","description":"\u003cp\u003eImprove ignition response and spark reliability with a performance ignition coil built for street-driven V8 combinations.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpark Energy\u003c\/strong\u003e\u003cbr\u003eHigh-output spark energy helps improve ignition consistency during startup, idle, and acceleration.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIgnition Coil Construction\u003c\/strong\u003e\u003cbr\u003ePerformance-style construction helps manage heat while maintaining dependable ignition performance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003e0.500 Ohms primary resistance helps match ignition system requirements. Verify mounting style and ignition compatibility before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS-BASED)\u003cbr\u003e• 4.8 L \/ 293 in3 (LR4, LY2, L20)\u003cbr\u003e• 5.3 L \/ 325 in3 (LM7, L59, LM4, L33, LC9, LH6, LH8, LH9, LMF, LMG, LY5, LS4)\u003cbr\u003e• 5.7 L \/ 346 in3 (LS1, LS6)\u003cbr\u003e• 6.0 L \/ 364 in3 (LQ4, LQ9, LS2, L76, LY6, L96, LFA, LZ1)\u003cbr\u003e• 6.2 L \/ 376 in3 (LS3, L92, L94, L9H, L99, LSA, LS9)\u003cbr\u003e• 7.0 L \/ 427 in3 (LS7)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eChevrolet Corvette LS2 \/ LS3 \/ LS7 \/ LS9 applications\u003cbr\u003eChevrolet Camaro LS3 \/ L99 applications\u003cbr\u003ePontiac G8 \/ GTO and Cadillac CTS-V LS-based applications\u003cbr\u003eLS swap builds using matching coil connector and bracket style\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eVerify coil connector style, coil bracket style, and wiring harness compatibility before installation.\u003cbr\u003e8 coils are required for V8 applications when replacing a full set.\u003cbr\u003eFor LS swap use, match the coil connector and bracket style to the harness and valve cover setup.\u003cbr\u003e\u003cbr\u003e\u003cstrong data-start=\"0\" data-end=\"19\" data-is-only-node=\"\"\u003eSPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003eBracket Material: Billet Aluminum\u003cbr\u003eCoil Style: Coil Pack\u003cbr\u003eInternal Construction: Epoxy\u003cbr\u003ePrimary Resistance: 0.500 Ohms\u003cbr\u003eSecondary Resistance: 2,000 Ohms\u003cbr\u003eMaximum Voltage: 40,000 Volts (V)\u003cbr\u003eSpark Duration: 300 Microseconds (µs)\u003cbr\u003ePeak Current: 220 Milliamperes (Ma)\u003cbr\u003eTurns Ratio: 75:1\u003cbr\u003eInductance: 2.7 Millihenrys (Mh)\u003cbr\u003eCoil Wire Attachment: Female\u003cbr\u003e\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49756411167016,"sku":"81022KT","price":475.56,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81022kt-1600_1.jpg?v=1732639998"},{"product_id":"gm-ls-ignition-coil-relocation-harness-12","title":"LS Ignition Coil Relocation Harnesses","description":"Give the ignition system a fresh spark source with a performance ignition coil designed for dependable voltage output.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpark Energy\u003c\/strong\u003e\u003cbr\u003eHigh-output spark energy helps improve ignition consistency during startup, idle, and acceleration.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIgnition Coil Construction\u003c\/strong\u003e\u003cbr\u003ePerformance-style construction helps manage heat while maintaining dependable ignition performance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003eVerify mounting style and ignition compatibility before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS BASED)\u003cbr\u003e• 4.8 L \/ 293 in3\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 5.7 L \/ 346 in3 commonly referred to as 350\u003cbr\u003e• 6.0 L \/ 364 in3\u003cbr\u003e• 6.2 L \/ 376 in3\u003cbr\u003e• 7.0 L \/ 427 in3\u003cbr\u003e\u003cbr\u003eNOTE: Sold as a pair to accommodate eight ignition coils.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eClassic V8 ignition upgrades\u003cbr\u003eStreet rod and muscle car ignition systems\u003cbr\u003eDistributor service and ignition refresh projects\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eVerify wiring polarity, ignition box compatibility, and mounting style before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eCable Type: Ignition Coil Assembly Wiring Harness\u003cbr\u003eConnector Color: Grey\u003cbr\u003eQuantity: 2\u003cbr\u003eWiring Harness Length: 12 in.\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562195460392,"sku":"81024","price":54.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81024-a.jpg?v=1732640010"},{"product_id":"universal-ls-lt-spark-plug-wire-set-8-5mm-with-180-plug-boots-black","title":"Universal LS\/LT Spark Plug Wire Set, 8.5mm with 180° Plug Boots - Black","description":"\u003cp\u003eThis ignition wire set is configured for GM LS\/LT Series ignition applications with Straight spark plug boot configuration, durable boot materials, and suppression-focused construction for reliable street performance use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpark Delivery \u0026amp; Ignition Performance\u003c\/strong\u003e\u003cbr\u003eThe 8.5 mm outside diameter uses spiral wound core material with radio frequency interference noise suppression to help transfer spark energy while reducing electrical interference in compatible ignition systems. Resistance is listed at 500 Ohms, which should be matched to the ignition setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePremium High-Density Silicone Heat Protection\u003c\/strong\u003e\u003cbr\u003eThe black high-density silicone insulation and silicone plug boot material help provide heat resistance and long-term durability. Premium high-density silicone rated for up to 600°f supports routing near warm engine-bay components when installed with proper clearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBoot Configuration \u0026amp; Routing\u003c\/strong\u003e\u003cbr\u003eThe set uses Straight spark plug boot configuration with 135° coil\/distributor-end boot degree and Coil Pack terminal compatibility to support clean routing between the plugs and distributor or coil packs. Wire separators included: Yes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; System Matching\u003c\/strong\u003e\u003cbr\u003eFitment type is listed as Universal. Confirm spark plug terminal style, coil or distributor configuration, cylinder routing order, separator placement, and heat clearance before installation. LS and LT applications should be matched by engine family and coil location rather than engine-code wording.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eGM LS Series V8 applications\u003cbr\u003e\u003cbr\u003eNote:\u003cbr\u003eComes with spark plug ends installed and components for connecting to LS ignition coils.\u003cbr\u003e\u003cbr\u003eCOMMON VEHICLE APPLICATIONS:\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Corvette\u003cbr\u003eChevrolet Tahoe\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nBoot Type: Straight\u003cbr\u003e\nCoil End Boot Color: Black\u003cbr\u003e\nCore Material: Spiral Wound\u003cbr\u003e\nDistributor Coil End Boot Degree: 135°\u003cbr\u003e\nDistributor Coil End Terminal Type: Coil Pack\u003cbr\u003e\nInsulation Color: Black\u003cbr\u003e\nInsulation Material: High-density Silicone\u003cbr\u003e\nNoise Suppression Type: Radio Frequency Interference\u003cbr\u003e\nOutside Diameter: 8.5 mm\u003cbr\u003e\nQuantity: Full Set of 8 Plug Wires\u003cbr\u003e\nResistance: 500 Ohms\u003cbr\u003e\nSpark Plug Boot Material: Silicone\u003cbr\u003e\nSpark Plug End Boot Color: Black\u003cbr\u003e\nSpark Plug End Boot Degree: Straight\u003cbr\u003e\nSpark Plug End Boot Quantity (Straight): 8\u003cbr\u003e\nSpark Plug Wire Resistance: 500 Ohms\u003cbr\u003e\nUniversal Or Specific Fit: Universal\u003cbr\u003e\nWire 1 Length: 43 in.\u003cbr\u003e\nWire 2 Length: 43 in.\u003cbr\u003e\nWire 3 Length: 43 in.\u003cbr\u003e\nWire 4 Length: 43 in.\u003cbr\u003e\nWire 5 Length: 43 in.\u003cbr\u003e\nWire 6 Length: 43 in.\u003cbr\u003e\nWire 7 Length: 43 in.\u003cbr\u003e\nWire 8 Length: 43 in.\u003cbr\u003e\nWire Separators Included: Yes","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49637110874408,"sku":"81025","price":40.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81025_001.jpg?v=1732640015"},{"product_id":"8-5mm-ls-lt-universal-black-ignition-wires-with-straight-ceramic-plug-boots-black","title":"8.5mm LS\/LT Universal Black Ignition Wires with Straight Ceramic Plug Boots - Black","description":"\u003cp\u003eFor ignition-system upgrades and replacement service, this wire set pairs 8.5 mm cable construction with application-specific boot geometry for clean fitment and dependable spark transfer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpark Delivery \u0026amp; Ignition Performance\u003c\/strong\u003e\u003cbr\u003eThe 8.5 mm outside diameter uses spiral wound core material with radio frequency interference noise suppression to help transfer spark energy while reducing electrical interference in compatible ignition systems. Resistance is listed at 500 Ohms, which should be matched to the ignition setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePremium High-Density Silicone Heat Protection\u003c\/strong\u003e\u003cbr\u003eThe black high-density silicone insulation and ceramic plug boot material help provide heat resistance and long-term durability. Premium high-density silicone with ceramic plug boots rated for elevated underhood heat supports routing near warm engine-bay components when installed with proper clearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBoot Configuration \u0026amp; Routing\u003c\/strong\u003e\u003cbr\u003eThe set uses Straight spark plug boot configuration with 135 deg. coil\/distributor-end boot degree and Coil Pack terminal compatibility to support clean routing between the plugs and distributor or coil packs. Wire separators included: Yes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; System Matching\u003c\/strong\u003e\u003cbr\u003eFitment type is listed as Universal. Confirm spark plug terminal style, coil or distributor configuration, cylinder routing order, separator placement, and heat clearance before installation. LS and LT applications should be matched by engine family and coil location rather than engine-code wording.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003e'GM LS Series V8 applications\u003cbr\u003e\u003cbr\u003eNOTE: Comes with spark plug ends installed and components for connecting to LS ignition coils.\u003cbr\u003e\u003cbr\u003eCOMMON VEHICLE APPLICATIONS:\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Corvette\u003cbr\u003eChevrolet Tahoe\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nBoot Type: Straight\u003cbr\u003e\nCoil End Boot Color: Black\u003cbr\u003e\nCore Material: Spiral Wound\u003cbr\u003e\nDistributor Coil End Boot Degree: 135 deg.\u003cbr\u003e\nDistributor Coil End Terminal Type: Coil Pack\u003cbr\u003e\nInsulation Color: Black\u003cbr\u003e\nInsulation Material: High-density Silicone\u003cbr\u003e\nNoise Suppression Type: Radio Frequency Interference\u003cbr\u003e\nOutside Diameter: 8.5 mm\u003cbr\u003e\nQuantity: Full Set of 8 Plug Wires\u003cbr\u003e\nResistance: 500 Ohms\u003cbr\u003e\nSpark Plug Boot Material: Ceramic\u003cbr\u003e\nSpark Plug End Boot Color: Black\u003cbr\u003e\nSpark Plug End Boot Degree: Straight\u003cbr\u003e\nSpark Plug End Boot Quantity Straight: 8\u003cbr\u003e\nSpark Plug Wire Resistance: 500 Ohms\u003cbr\u003e\nUniversal Or Specific Fit: Universal\u003cbr\u003e\nWire 1 Length: 43 in.\u003cbr\u003e\nWire 2 Length: 43 in.\u003cbr\u003e\nWire 3 Length: 43 in.\u003cbr\u003e\nWire 4 Length: 43 in.\u003cbr\u003e\nWire 5 Length: 43 in.\u003cbr\u003e\nWire 6 Length: 43 in.\u003cbr\u003e\nWire 7 Length: 43 in.\u003cbr\u003e\nWire 8 Length: 43 in.\u003cbr\u003e\nWire Separators Included: Yes","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49637281366312,"sku":"81025BCE","price":122.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81025bce_001.jpg?v=1732640020"},{"product_id":"gm-ls-truck-8-5mm-ignition-wires-with-180-plug-boots-black","title":"GM LS Truck 8.5mm Ignition Wires with 180° Plug Boots - Black","description":"\u003cp\u003eDesigned for GM LS truck ignition applications, this spark plug wire set helps support clean routing, stable ignition performance, and long-term heat resistance around tight engine-bay layouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpark Delivery \u0026amp; Ignition Performance\u003c\/strong\u003e\u003cbr\u003eThe 8.5 mm outside diameter uses spiral wound core material with radio frequency interference noise suppression to help transfer spark energy while reducing electrical interference in compatible ignition systems. Resistance is listed at 500 Ohms, which should be matched to the ignition setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePremium High-Density Silicone Heat Protection\u003c\/strong\u003e\u003cbr\u003eThe black high-density silicone insulation and silicone plug boot material help provide heat resistance and long-term durability. Premium high-density silicone rated for up to 600°f supports routing near warm engine-bay components when installed with proper clearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBoot Configuration \u0026amp; Routing\u003c\/strong\u003e\u003cbr\u003eThe set uses Straight spark plug boot configuration with 135 deg. coil\/distributor-end boot degree and Coil Pack terminal compatibility to support clean routing between the plugs and distributor or coil packs. Wire separators included: Yes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; System Matching\u003c\/strong\u003e\u003cbr\u003eFitment type is listed as Universal. Confirm spark plug terminal style, coil or distributor configuration, cylinder routing order, separator placement, and heat clearance before installation. LS and LT applications should be matched by engine family and coil location rather than engine-code wording.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eGM 90° V6\u003cbr\u003e• 4.3 L \/ 262 in3 (Vortec 4300)\u003cbr\u003e\u003cbr\u003e'GM LS Series V8 applications\u003cbr\u003e• 4.8 L \/ 294 in3\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 6.0 L \/ 364 in3\u003cbr\u003e• 6.2 L \/ 376 in3\u003cbr\u003e\u003cbr\u003e'14-'16 Chevrolet Small Block V8 Gen. V (LT-Based)\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 6.2 L \/ 376 in3\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTES:\u003c\/b\u003e Fits many 1999-2015 GM LS truck and '14-'16 LT applications.\u003cbr\u003e\u003cbr\u003eCOMMON VEHICLE APPLICATIONS:\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Tahoe\u003cbr\u003eChevrolet Suburban\u003cbr\u003eCadillac Escalade\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nBoot Type: Straight\u003cbr\u003e\nCoil End Boot Color: Black\u003cbr\u003e\nCore Material: Spiral Wound\u003cbr\u003e\nDistributor Coil End Boot Degree: 135 deg.\u003cbr\u003e\nDistributor Coil End Terminal Type: Coil Pack\u003cbr\u003e\nInsulation Color: Black\u003cbr\u003e\nInsulation Material: High-density Silicone\u003cbr\u003e\nNoise Suppression Type: Radio Frequency Interference\u003cbr\u003e\nOutside Diameter: 8.5 mm\u003cbr\u003e\nQuantity: Full Set of 8 Plug Wires\u003cbr\u003e\nResistance: 500 Ohms\u003cbr\u003e\nSpark Plug Boot Material: Silicone\u003cbr\u003e\nSpark Plug End Boot Color: Black\u003cbr\u003e\nSpark Plug End Boot Degree: Straight\u003cbr\u003e\nSpark Plug End Boot Quantity Straight: 8\u003cbr\u003e\nSpark Plug Wire Resistance: 500 Ohms\u003cbr\u003e\nUniversal Or Specific Fit: Universal\u003cbr\u003e\nWire 1 Length: 12 in.\u003cbr\u003e\nWire 2 Length: 12 in.\u003cbr\u003e\nWire 3 Length: 12 in.\u003cbr\u003e\nWire 4 Length: 12 in.\u003cbr\u003e\nWire 5 Length: 12 in.\u003cbr\u003e\nWire 6 Length: 12 in.\u003cbr\u003e\nWire 7 Length: 12 in.\u003cbr\u003e\nWire 8 Length: 12 in.\u003cbr\u003e\nWire Separators Included: Yes","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49637090230568,"sku":"81027","price":35.29,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81027_1600.jpg?v=1732640036"},{"product_id":"8-5mm-ls-truck-black-ignition-wires-with-straight-ceramic-plug-boots-black","title":"8.5mm LS Truck Black Ignition Wires with Straight Ceramic Plug Boots - Black","description":"\u003cp\u003eThis ignition wire set is configured for GM LS truck ignition applications with Straight spark plug boot configuration, durable boot materials, and suppression-focused construction for reliable street performance use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpark Delivery \u0026amp; Ignition Performance\u003c\/strong\u003e\u003cbr\u003eThe 8.5 mm outside diameter uses spiral wound core material with radio frequency interference noise suppression to help transfer spark energy while reducing electrical interference in compatible ignition systems. Resistance is listed at 500 Ohms, which should be matched to the ignition setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePremium High-Density Silicone Heat Protection\u003c\/strong\u003e\u003cbr\u003eThe black high-density silicone insulation and ceramic plug boot material help provide heat resistance and long-term durability. Premium high-density silicone with ceramic plug boots rated for elevated underhood heat supports routing near warm engine-bay components when installed with proper clearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBoot Configuration \u0026amp; Routing\u003c\/strong\u003e\u003cbr\u003eThe set uses Straight spark plug boot configuration with 135° coil\/distributor-end boot degree and Coil Pack terminal compatibility to support clean routing between the plugs and distributor or coil packs. Wire separators included: Yes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; System Matching\u003c\/strong\u003e\u003cbr\u003eFitment type is listed as Universal. Confirm spark plug terminal style, coil or distributor configuration, cylinder routing order, separator placement, and heat clearance before installation. LS and LT applications should be matched by engine family and coil location rather than engine-code wording.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eGM 90° V6\u003cbr\u003e• 4.3 L \/ 262 in3 (Vortec 4300)\u003cbr\u003e\u003cbr\u003e'GM LS Series V8 applications\u003cbr\u003e• 4.8 L \/ 294 in3\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 6.0 L \/ 364 in3\u003cbr\u003e• 6.2 L \/ 376 in3\u003cbr\u003e\u003cbr\u003e'14-'16 Chevrolet Small Block V8 Gen. V (LT-Based)\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 6.2 L \/ 376 in3\u003cbr\u003e\u003cbr\u003eNOTE: Fits many 1999-2015 GM LS truck and '14-'16 LT applications\u003cbr\u003e\u003cbr\u003eCOMMON VEHICLE APPLICATIONS:\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Tahoe\u003cbr\u003eChevrolet Suburban\u003cbr\u003eCadillac Escalade\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nBoot Type: Straight\u003cbr\u003e\nCoil End Boot Color: Black\u003cbr\u003e\nCore Material: Spiral Wound\u003cbr\u003e\nDistributor Coil End Boot Degree: 135°\u003cbr\u003e\nDistributor Coil End Terminal Type: Coil Pack\u003cbr\u003e\nInsulation Color: Black\u003cbr\u003e\nInsulation Material: High-density Silicone\u003cbr\u003e\nNoise Suppression Type: Radio Frequency Interference\u003cbr\u003e\nOutside Diameter: 8.5 mm\u003cbr\u003e\nQuantity: Full Set of 8 Plug Wires\u003cbr\u003e\nResistance: 500 Ohms\u003cbr\u003e\nSpark Plug Boot Material: Ceramic\u003cbr\u003e\nSpark Plug End Boot Color: Black\u003cbr\u003e\nSpark Plug End Boot Degree: Straight\u003cbr\u003e\nSpark Plug End Boot Quantity (Straight): 8\u003cbr\u003e\nSpark Plug Wire Resistance: 500 Ohms\u003cbr\u003e\nUniversal Or Specific Fit: Universal\u003cbr\u003e\nWire 1 Length: 12 in.\u003cbr\u003e\nWire 2 Length: 12 in.\u003cbr\u003e\nWire 3 Length: 12 in.\u003cbr\u003e\nWire 4 Length: 12 in.\u003cbr\u003e\nWire 5 Length: 12 in.\u003cbr\u003e\nWire 6 Length: 12 in.\u003cbr\u003e\nWire 7 Length: 12 in.\u003cbr\u003e\nWire 8 Length: 12 in.\u003cbr\u003e\nWire Separators Included: Yes","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49637269995816,"sku":"81027BCE","price":122.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81027bce_001.jpg?v=1732640041"},{"product_id":"universal-gm-ls-8-5mm-ignition-wires-with-135-plug-boots-red","title":"Universal GM LS 8.5mm Ignition Wires with 135° Plug Boots - Red","description":"\u003cp\u003eFor ignition-system upgrades and replacement service, this wire set pairs 8.5 mm cable construction with application-specific boot geometry for clean fitment and dependable spark transfer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpark Delivery \u0026amp; Ignition Performance\u003c\/strong\u003e\u003cbr\u003eThe 8.5 mm outside diameter uses spiral wound core material with radio frequency interference noise suppression to help transfer spark energy while reducing electrical interference in compatible ignition systems. Resistance is listed at 500 Ohms, which should be matched to the ignition setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePremium High-Density Silicone Heat Protection\u003c\/strong\u003e\u003cbr\u003eThe red high-density silicone insulation and silicone plug boot material help provide heat resistance and long-term durability. Premium high-density silicone rated for up to 600°f supports routing near warm engine-bay components when installed with proper clearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBoot Configuration \u0026amp; Routing\u003c\/strong\u003e\u003cbr\u003eThe set uses 135° spark plug boot configuration with 135° coil\/distributor-end boot degree and Coil Pack terminal compatibility to support clean routing between the plugs and distributor or coil packs. Wire separators included: Yes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; System Matching\u003c\/strong\u003e\u003cbr\u003eFitment type is listed as Universal. Confirm spark plug terminal style, coil or distributor configuration, cylinder routing order, separator placement, and heat clearance before installation. LS and LT applications should be matched by engine family and coil location rather than engine-code wording.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003e'GM LS Series V8 applications\u003cbr\u003e• 4.8 L \/ 294 in3\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 5.7 L \/ 346 in3\u003cbr\u003e• 6.0 L \/ 364 in3\u003cbr\u003e• 6.2 L \/ 376 in3\u003cbr\u003e\u003cbr\u003e'14-'16 Chevrolet Small Block V8 Gen. V (LT-Based)\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 6.2 L \/ 376 in3\u003cbr\u003e\u003cbr\u003eNOTE: Fits small block generations 3,4, and 5 LS and LT applications.\u003cbr\u003e\u003cbr\u003eCOMMON VEHICLE APPLICATIONS:\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Corvette\u003cbr\u003eChevrolet Tahoe\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nBoot Type: 135°\u003cbr\u003e\nCoil End Boot Color: Black\u003cbr\u003e\nCore Material: Spiral Wound\u003cbr\u003e\nDistributor Coil End Boot Degree: 135°\u003cbr\u003e\nDistributor Coil End Terminal Type: Coil Pack\u003cbr\u003e\nInsulation Color: Red\u003cbr\u003e\nInsulation Material: High-density Silicone\u003cbr\u003e\nNoise Suppression Type: Radio Frequency Interference\u003cbr\u003e\nOutside Diameter: 8.5 mm\u003cbr\u003e\nQuantity: Full Set of 8 Plug Wires\u003cbr\u003e\nResistance: 500 Ohms\u003cbr\u003e\nSpark Plug Boot Material: Silicone\u003cbr\u003e\nSpark Plug End Boot Color: Red\u003cbr\u003e\nSpark Plug End Boot Degree: 135°\u003cbr\u003e\nSpark Plug End Boot Quantity (Straight): 8\u003cbr\u003e\nSpark Plug Wire Resistance: 500 Ohms\u003cbr\u003e\nUniversal Or Specific Fit: Universal\u003cbr\u003e\nWire 1 Length: 9.750 in.\u003cbr\u003e\nWire 2 Length: 9.750 in.\u003cbr\u003e\nWire 3 Length: 9.750 in.\u003cbr\u003e\nWire 4 Length: 9.750 in.\u003cbr\u003e\nWire 5 Length: 9.750 in.\u003cbr\u003e\nWire 6 Length: 9.750 in.\u003cbr\u003e\nWire 7 Length: 9.750 in.\u003cbr\u003e\nWire 8 Length: 9.750 in.\u003cbr\u003e\nWire Separators Included: Yes","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49760471384360,"sku":"81228","price":35.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81228_1600_4cdd647d-9074-4136-a9a8-3178bc2baf14.jpg?v=1734116902"},{"product_id":"universal-gm-ls-8-5mm-ignition-wires-with-135-ceramic-plug-boots-black","title":"Universal GM LS 8.5mm Ignition Wires with 135° Ceramic Plug Boots - Black","description":"\u003cp\u003eBuilt for GM LS\/LT Series ignition applications, this ignition wire set combines 8.5mm wire construction, 135° spark plug boot configuration, and durable insulation for dependable spark delivery in properly matched applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpark Delivery \u0026amp; Ignition Performance\u003c\/strong\u003e\u003cbr\u003eThe 8.5mm outside diameter to help transfer spark energy while reducing electrical interference in compatible ignition systems. Resistance is listed at 500 Ohms \/Ft, which should be matched to the ignition setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePremium High-Density Silicone Heat Protection\u003c\/strong\u003e\u003cbr\u003eThe premium high-density silicone insulation help provide heat resistance and long-term durability. Premium high-density silicone with ceramic plug boots rated for elevated underhood heat supports routing near warm engine-bay components when installed with proper clearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBoot Configuration \u0026amp; Routing\u003c\/strong\u003e\u003cbr\u003eThe set uses 135° spark plug boot configuration to support clean routing between the plugs and distributor or coil packs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; System Matching\u003c\/strong\u003e\u003cbr\u003eConfirm spark plug terminal style, coil or distributor configuration, cylinder routing order, separator placement, and heat clearance before installation. LS and LT applications should be matched by engine family and coil location rather than engine-code wording.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eGM LS Series V8 applications\u003cbr\u003e• 4.8 L \/ 294 in3\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 5.7 L \/ 346 in3\u003cbr\u003e• 6.0 L \/ 364 in3\u003cbr\u003e• 6.2 L \/ 376 in3\u003cbr\u003e\u003cbr\u003e'14-'16 Chevrolet Small Block V8 Gen. V (LT-Based)\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 6.2 L \/ 376 in3\u003cbr\u003e\u003cbr\u003eNOTE: Fits small block generations 3,4, and 5 LS and LT applications.\u003cbr\u003e\u003cbr\u003eCOMMON VEHICLE APPLICATIONS:\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Corvette\u003cbr\u003eChevrolet Tahoe\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nWire Diameter: 8.5mm\u003cbr\u003e\nConductor Style: Spiral Wound Kevlar® Core\u003cbr\u003e\nResistance: 500 Ohms \/Ft\u003cbr\u003e\nRFI Suppression: Yes\u003cbr\u003e\nWire Jacketing: High-Density Silicone\u003cbr\u003e\nWire Length: 9 3\/4\"\u003cbr\u003e\nSpark Plug Boot Angle: 135°\u003cbr\u003e\nWire End: Female\u003cbr\u003e\nWire Color: Black\u003cbr\u003e\nQuantity: Full Set Of 8 Plug Wires","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49637213274408,"sku":"81028BCE","price":122.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81028BCE_01.jpg?v=1737763146"},{"product_id":"optispark-i-1992-1994-lt1-distributor","title":"Chevrolet 1992-1994 LT1 Gen. 1 Opti-Spark I Distributor","description":"\u003cp\u003eDesigned for enthusiasts looking to upgrade or restore their ignition system, this distributor helps maintain reliable spark output and stable ignition timing across the RPM range.\u003c\/p\u003e\u003cp\u003eIts durable construction and performance-focused design support dependable operation in compatible Chevrolet engine combinations while helping improve throttle response and ignition consistency.\u003c\/p\u003e\u003cp\u003eDesigned for compatible electronic ignition and EFI-equipped applications, this distributor supports reliable signal accuracy and dependable engine management operation when installed with the correct ignition components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. II (LT-Based)\u003cbr\u003e• 4.3 L \/ 265 in³ L99, commonly referred to as \"Baby LT1\" (1994 Caprice only)\u003cbr\u003e• 5.7 L \/ 350 in³ LT1\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eDirect replacement for computer-controlled Optispark I OEM distributor from 1992-1994\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003e• Chevrolet Corvette\u003cbr\u003e• Chevrolet Camaro\u003cbr\u003e• Pontiac Firebird\u003cbr\u003e• Chevrolet Caprice\u003cbr\u003e• Buick Roadmaster\u003cbr\u003e• Cadillac Fleetwood\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003eTrigger Type: Optical\u003cbr\u003e\nAdvance Type: Computer-Controlled\u003cbr\u003e\nTerminal Gender: Crab-Style Female\u003cbr\u003e\nMechanical Tach Drive: No\u003cbr\u003e\nSlip Collar: No\u003cbr\u003e\nCoil Included: No\u003cbr\u003e\nCoil Type: External\u003cbr\u003e\nHousing Material: Cast Aluminum\u003cbr\u003e\nIgnition Box Required: No\u003cbr\u003e\nMarine Use: No\u003cbr\u003e\nCylinders: 8\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562253623592,"sku":"JM6505","price":157.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm6505-1.jpg?v=1732641281"},{"product_id":"optispark-ii-1995-1997-lt1-distributor","title":"Chevrolet 1995-1997 LT1 Gen. 2 Opti-Spark II Distributor","description":"\u003cp\u003eEngineered for dependable ignition performance, this distributor combines durable construction with reliable triggering and spark delivery for compatible Chevrolet applications.\u003c\/p\u003e\u003cp\u003eThe performance-oriented design supports accurate timing control, responsive acceleration, and consistent ignition operation for street-driven and performance engine combinations.\u003c\/p\u003e\u003cp\u003eDesigned for compatible electronic ignition and EFI-equipped applications, this distributor supports reliable signal accuracy and dependable engine management operation when installed with the correct ignition components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. II (LT-Based)\u003cbr\u003e5.7 L \/ 350 in³ LT1, LT4\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eDirect replacement for computer-controlled Optispark II OEM distributor from 1995-1997.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003e• Chevrolet Corvette\u003cbr\u003e• Chevrolet Camaro\u003cbr\u003e• Pontiac Firebird\u003cbr\u003e• Chevrolet Caprice\u003cbr\u003e• Buick Roadmaster\u003cbr\u003e• Cadillac Fleetwood\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003eTrigger Type: Optical\u003cbr\u003e\nAdvance Type: Computer-Controlled\u003cbr\u003e\nTerminal Gender: Crab-Style Female\u003cbr\u003e\nMechanical Tach Drive: No\u003cbr\u003e\nSlip Collar: No\u003cbr\u003e\nCoil Included: No\u003cbr\u003e\nCoil Type: External\u003cbr\u003e\nHousing Material: Cast Aluminum\u003cbr\u003e\nIgnition Box Required: No\u003cbr\u003e\nMarine Use: No\u003cbr\u003e\nCylinders: 8\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562254377256,"sku":"JM6507","price":142.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm6507-2-600.jpg?v=1732641299"},{"product_id":"95-97-optispark-cap-rotor-kit","title":"Black Chevrolet LT1 Gen. 2 1995-1997 Opti-Spark II Distributor Cap and Rotor Kit","description":"Refresh LT1 Opti-Spark ignition service with a Gen. 2 cap and rotor kit built for the correct 1990s LT-based distributor layout.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOpti-Spark Generation\u003c\/strong\u003e\u003cbr\u003eGen. 2 fitment matters because early and late Opti-Spark cap and rotor layouts are not interchangeable.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLT-Based Ignition Service\u003c\/strong\u003e\u003cbr\u003eThe cap and rotor help refresh the distributor-side spark routing on compatible LT1\/LT4 applications.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003eConfirm Opti-Spark generation, model year, and distributor style before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. II (LT-Based)\u003cbr\u003e• 5.7 L \/ 350 in3 LT1, LT4\u003cbr\u003e\u003cbr\u003eNOTE: Direct replacement cap and rotor for Optispark II OEM distributor from 1995-1997 (JM6507).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eChevrolet LT1 \/ LT4 Opti-Spark distributor service applications\u003cbr\u003e1990s GM LT-based ignition refresh projects\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eMatch Opti-Spark generation before purchase. Gen. 1 and Gen. 2 cap\/rotor kits are not interchangeable.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eDistributor Type: Opti Spark Gen. 2\u003cbr\u003eTerminal Type: Female\u003cbr\u003eTerminal Material: Brass\u003cbr\u003eAttachment Type: Clamp\u003cbr\u003eCylinders: 8\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562267713832,"sku":"JM6982BK","price":36.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/JM6982BK_01.jpg?v=1779301659"},{"product_id":"gm-ad244-style-high-output-220-amp-alternator-black","title":"GM AD244 Style High Output 220 Amp Alternator - Black","description":"\u003cp\u003e\u003cspan\u003eUpgrade your LS truck charging system with this GM AD244 Style High Output 220 Amp Alternator engineered to deliver exceptional charging performance for vehicles with increased electrical demands. Designed for compatible GM LS truck accessory drive systems, this alternator provides the charging capacity needed to support modern performance upgrades, electrical accessories, and high-demand vehicle systems.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe 220 amp output provides a substantial increase over many factory charging systems and helps support electric cooling fans, electronic fuel injection systems, electric fuel pumps, aftermarket ignition systems, high-output lighting, air conditioning systems, audio equipment, winches, off-road accessories, and other power-hungry electrical components. Increased charging capacity helps maintain stable system voltage during idle, cruising, towing, and demanding operating conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBuilt using the GM AD244 case design commonly found on many 1999-2006 GM truck applications, this alternator is designed for use with compatible LS truck accessory drive systems and factory-style AD244 mounting brackets. It is commonly used on 4.8L, 5.3L, 5.7L, 6.0L, 6.5L Diesel, 6.6L Duramax, and 8.1L applications where increased charging capacity is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe internally regulated design helps maintain consistent charging system performance while utilizing the factory-style 4-pin electrical connection commonly found on AD244-equipped applications. Unlike one-wire alternators, this design is intended to integrate with compatible factory-style charging system controls and wiring configurations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEquipped with a 6-groove serpentine pulley and finished in bright chrome, this alternator combines show-quality appearance with dependable charging capability. Whether you're upgrading an LS-powered truck, supporting additional electrical accessories, building a tow vehicle, completing an LS swap with truck accessories, or replacing a factory AD244 alternator, this high-output alternator delivers the charging performance and reliability needed for demanding applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e220 Amp Charging Performance\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe 220 amp output provides the charging capacity needed for electric cooling fans, EFI systems, electric fuel pumps, aftermarket ignition systems, lighting upgrades, audio equipment, off-road accessories, and other high-demand electrical components. High-output charging helps maintain stable system voltage under increased electrical loads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGM AD244 Case Design\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eBuilt using the AD244 alternator platform commonly found on many 1999-2006 GM truck applications. Designed for compatible LS truck accessory drive systems utilizing AD244 mounting locations, factory-style brackets, and factory-style charging system connections.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eGM LS TRUCK ACCESSORY DRIVE SYSTEMS\u003cbr\u003eGM LS-Based 4.8L, 5.3L, 5.7L, and 6.0L Engines\u003cbr\u003eGM 4.3L V6\u003cbr\u003eGM 6.5L Diesel\u003cbr\u003eDuramax 6.6L Diesel\u003cbr\u003eGM 8.1L \/ 496 Big Block\u003cbr\u003eCompatible LS Truck Accessory Drive Systems\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eChevrolet Tahoe\u003cbr\u003eChevrolet Suburban\u003cbr\u003eGMC Sierra\u003cbr\u003eGMC Yukon\u003cbr\u003eChevrolet Express Vans\u003cbr\u003eGMC Savana Vans\u003cbr\u003eLS Engine Swaps Using Truck Spacing\u003cbr\u003eTow Vehicles\u003cbr\u003eOff-Road Builds\u003c\/p\u003e\n\u003cp\u003eNOTES\u003cbr\u003eDesigned for AD244-style alternator applications\u003cbr\u003eUtilizes factory-style 4-pin connector\u003cbr\u003eNot compatible with 2-pin harnesses\u003cbr\u003eVerify truck vs. car accessory spacing before ordering\u003cbr\u003eVerify mounting brackets and pulley alignment prior to installation\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eAC Service Tap: No\u003cbr\u003eAmperage Rating: 220 A\u003cbr\u003eBrushless: No\u003cbr\u003eCase Circumference: 17.900 in.\u003cbr\u003eCase Color: Silver\u003cbr\u003eCase Material: Aluminum\u003cbr\u003eDistance Between Mounting Feet: 4.100 in.\u003cbr\u003eExternal Fan Included: Yes\u003cbr\u003eExternal Regulator Included: No\u003cbr\u003eFamily: AD-244\u003cbr\u003eFan Type: External\u003cbr\u003eFinish: Black\u003cbr\u003eGround Type: Case ground\u003cbr\u003eMounting Type: Split Mount\u003cbr\u003eOne Wire Capable: No\u003cbr\u003eOutside Pulley Diameter: 2.500 in.\u003cbr\u003ePlug Clock Rear View Main Mounting Ear at 6 O Clock: 10 o'clock\u003cbr\u003ePlug Type: 4-pin\u003cbr\u003ePulley Belt Type: Serpentine\u003cbr\u003ePulley Groove Quantity: 6\u003cbr\u003ePulley Included: Yes\u003cbr\u003eRegulator Type: Internal\u003cbr\u003eRotation Direction: Clockwise\u003cbr\u003eSplit Mounting Foot Overall Inner Spacing: 4.100\u003cbr\u003eSplit Mounting Foot Overall Outside Spacing: 5.100\u003cbr\u003eTerminal Quantity: 5\u003cbr\u003eVoltage: 12 VDC\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49728843186472,"sku":"ES1024BK","price":286.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/ES1024BK-02.jpg?v=1779295904"},{"product_id":"gm-cs130d-style-high-output-180-amp-alternator-black","title":"GM CS130D Style High Output 180 Amp Alternator - Black","description":"\u003cp\u003e\u003cspan\u003eBuilt using the GM CS130D alternator platform, this unit is designed for compatible LS-based charging systems utilizing factory-style mounting locations and serpentine accessory drives. The CS130D design is commonly found on GM LS-powered performance vehicles and remains a popular upgrade for enthusiasts seeking increased charging capacity while retaining factory-style fitment and wiring compatibility.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCompatible with many GM LS Series V8 applications, including LS1-equipped vehicles and compatible 1998-2002 Chevrolet Camaro and Pontiac Firebird models, this alternator is ideal for vehicles equipped with electric cooling fans, upgraded fuel systems, aftermarket audio equipment, performance ignition systems, and other power-hungry accessories. The factory-style 4-pin connection allows integration with compatible factory-style charging system wiring while maintaining proper charging system operation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe internal voltage regulator helps maintain consistent charging performance under varying electrical loads, making this alternator well-suited for both daily-driven and performance-oriented applications. Unlike many universal alternators, the CS130D platform is designed around modern GM charging system architecture and serpentine accessory drives.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFinished in bold black, this alternator combines show-quality appearance with dependable charging capability. Whether you're replacing a factory LS alternator, upgrading a Camaro or Firebird charging system, supporting additional electrical accessories, or increasing charging capacity for a modified LS-powered vehicle, this 180 amp alternator delivers the performance and reliability needed for demanding applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e180 Amp Charging Performance\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe 180 amp output provides the charging capacity needed for electric cooling fans, EFI systems, electric fuel pumps, upgraded ignition systems, lighting upgrades, audio equipment, electric water pumps, and other high-demand electrical accessories. High-output charging helps maintain stable system voltage under increased electrical loads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGM CS130D Alternator Design\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eBuilt using the GM CS130D platform commonly found on LS-powered applications. The Factory-style design supports compatible factory mounting locations, serpentine accessory drives, and factory-style charging system connections.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eGM LS Series V8 Engines\u003cbr\u003eDirect fit for CS130D alternator used in Camaro and Firebird from 1998-2002.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eGM LS Series Camaro and Firebird applications using compatible CS130D mounting, connector, pulley alignment, and charging-system layout.\u003c\/p\u003e\n\u003cp\u003eNOTES\u003cbr\u003e• Designed for CS130D Alternator Applications\u003cbr\u003e• Factory-Style 4-Pin Connector\u003cbr\u003e• Internal Voltage Regulator\u003cbr\u003e• Designed for Serpentine Belt Systems\u003cbr\u003e• Verify Mounting Configuration Before Ordering\u003cbr\u003e• Verify Pulley Alignment and Connector Compatibility\u003cbr\u003e• Fitment Depends on Alternator Type and Charging System Configuration\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eAC Service Tap: No\u003cbr\u003eAmperage Rating: 180 A\u003cbr\u003eBrushless: No\u003cbr\u003eCase Circumference: 16.000 in.\u003cbr\u003eCase Color: Silver\u003cbr\u003eCase Material: Aluminum\u003cbr\u003eDistance Between Mounting Feet: 6.610 in.\u003cbr\u003eExternal Fan Included: Yes\u003cbr\u003eExternal Regulator Included: No\u003cbr\u003eFamily: CS130D\u003cbr\u003eFan Type: External\u003cbr\u003eFinish: Chrome\u003cbr\u003eGround Type: Case ground\u003cbr\u003eMounting Type: Split Mount\u003cbr\u003eOne Wire Capable: No\u003cbr\u003eOutside Pulley Diameter: 2.250 in.\u003cbr\u003ePlug Clock Rear View Main Mounting Ear at 6 O Clock: 5 o'clock\u003cbr\u003ePlug Type: 4-pin\u003cbr\u003ePulley Belt Type: Serpentine\u003cbr\u003ePulley Groove Quantity: 6\u003cbr\u003ePulley Included: Yes\u003cbr\u003eRegulator Type: Internal\u003cbr\u003eRotation Direction: Clockwise\u003cbr\u003eSplit Mounting Foot Overall Inner Spacing: 6.610\u003cbr\u003eSplit Mounting Foot Overall Outside Spacing: 7.610\u003cbr\u003eTerminal Quantity: 5\u003cbr\u003eVoltage: 12 VDC\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49728848494888,"sku":"ES1025BK","price":286.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/ES1025BK_02.jpg?v=1779907274"},{"product_id":"gm-ls2-ls3-ls7-ls9-billet-aluminum-ignition-coil-brackets-natural","title":"GM LS2\/LS3\/LS7\/LS9 Billet Aluminum Ignition Coil Brackets - Natural","description":"\u003cp\u003eThis GM LS2\/LS3\/LS7\/LS9 Billet Aluminum Ignition Coil Brackets - Natural is designed for GM LS engine and accessory drive applications that need a clean, rigid ignition coil mounting solution. It helps position the component correctly while improving the finished look and serviceability of the engine bay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication-Specific Mounting\u003c\/strong\u003e\u003cbr\u003e\nThe bracket configuration is built around the listed platform and component layout, helping align the ignition coil with the correct belt, cable, or mounting path.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDurable Bracket Construction\u003c\/strong\u003e\u003cbr\u003e\nManufactured from billet aluminum, this bracket is designed to handle normal engine vibration, accessory load, and repeated service use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClean Engine Bay Finish\u003c\/strong\u003e\u003cbr\u003e\nThe finished appearance gives the installation a cleaner, more complete look for street, show, and performance builds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003e\n\u003cstrong\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS BASED)\u003c\/strong\u003e\u003cbr\u003e\n• 4.8 L \/ 293 in3 (LR4, LY2, L20)\u003cbr\u003e\n• 5.3 L \/ 325 in3 (LM7, L59, LM4, L33, LC9, LH6, LY5, LMG)\u003cbr\u003e\n• 6.0 L \/ 364 in3 (LQ4, LQ9, LS2, LY6, L76, L96)\u003cbr\u003e\n• 6.2 L \/ 376 in3 (LS3, L92, L99, LS9)\u003cbr\u003e\n• 7.0 L \/ 427 in3 (LS7)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE Direct replacement for most LS2, LS3, LS7, and LS9 car application brackets.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChevrolet Silverado 1500 \/ 2500 \/ 3500\u003c\/li\u003e\n\u003cli\u003eGMC Sierra 1500 \/ 2500 \/ 3500\u003c\/li\u003e\n\u003cli\u003eChevrolet Tahoe \/ Suburban\u003c\/li\u003e\n\u003cli\u003eGMC Yukon \/ Yukon XL\u003c\/li\u003e\n\u003cli\u003eChevrolet Camaro \/ Corvette (LS equipped)\u003c\/li\u003e\n\u003cli\u003ePontiac GTO \/ G8 (LS equipped)\u003c\/li\u003e\n\u003c\/ul\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\nCoil Type: Coil Pack\u003cbr\u003e\nCoil Style: Delco D510C \/ TSP 81015\u003cbr\u003e\nBracket Material: Billet Aluminum\u003cbr\u003e\nQuantity: 2\u003cbr\u003e\nIncluded: Mounting Hardware\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49730092761384,"sku":"81022","price":77.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81022-1600_1.jpg?v=1736982398"},{"product_id":"chevy-small-block-big-block-v8-staggered-mount-1-9-hp-mini-starter-all-black","title":"Chevy Small Block \u0026 Big Block V8 Staggered Mount 1.9 HP Mini Starter - All Black","description":"\u003cp\u003eUpgrade your Chevrolet V8 starting system with a compact, high-torque mini starter designed for Small Block and Big Block Chevy engines. Featuring a powerful 1.9 horsepower motor and a 4:1 gear reduction ratio, this starter delivers dependable cranking performance for street, restoration, and performance applications.\u003c\/p\u003e\n\u003cp\u003eThe compact Nippondenso-style design provides additional clearance around headers, oil pans, and other engine components where traditional full-size starters may create fitment challenges. Its adjustable billet aluminum mounting block allows easier positioning during installation while supporting both inline and staggered mounting configurations.\u003c\/p\u003e\n\u003cp\u003eEngineered with high-quality internal components, this starter is built to provide reliable starting performance in a wide range of Chevrolet V8 applications. The chrome finish adds a polished appearance that complements muscle cars, hot rods, street rods, classic trucks, and custom engine builds.\u003c\/p\u003e\n\u003cp\u003eWhether replacing a worn factory starter or upgrading to a compact mini starter, this unit delivers the power, clearance, and reliability needed for dependable engine starts.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompact Mini Starter Design\u003c\/strong\u003e\u003cbr\u003eThe Nippondenso-style housing provides a compact footprint that helps improve clearance around headers, exhaust components, oil pans, and tight engine bay layouts. Its smaller size makes it a popular upgrade for performance builds and restoration projects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Torque Starting Performance\u003c\/strong\u003e\u003cbr\u003eThe 1.9 HP motor combined with a 4:1 gear reduction ratio helps deliver strong cranking power while maintaining a compact design. This combination is suitable for many street-driven, restoration, and performance-oriented Chevrolet V8 applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation and Compatibility\u003c\/strong\u003e\u003cbr\u003eFits many Small Block and Big Block Chevy V8 applications\u003cbr\u003eSupports inline and staggered bolt pattern mounting\u003cbr\u003eFits 168-tooth flywheel applications\u003cbr\u003eAdjustable billet mounting block included\u003cbr\u003eStandard rotation design\u003cbr\u003eMounting hardware included where applicable\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET BIG BLOCK V8 GEN. I (W)\u003cbr\u003e• 5.7 L \/ 348 in3\u003cbr\u003e• 6.7 L \/ 409 in3\u003cbr\u003e• 7.0 L \/ 427 in3\u003cbr\u003e\u003cbr\u003eCHEVROLET BIG BLOCK V8 GEN. II (MARK IV)\u003cbr\u003e• 6.5 L \/ 396 in3\u003cbr\u003e• 6.6 L \/ 402 in3\u003cbr\u003e• 7.0 L \/ 427 in3\u003cbr\u003e• 7.4 L \/ 454 in3\u003cbr\u003e\u003cbr\u003eCHEVROLET BIG BLOCK V8 GEN. V\u003cbr\u003e• 7.4 L \/ 454 in3\u003cbr\u003e\u003cbr\u003eCHEVROLET BIG BLOCK V8 GEN. VI\u003cbr\u003e• 7.4 L \/ 454 in3 commonly referred to as Vortec 7400\u003cbr\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. I\u003cbr\u003e• 4.3 L \/ 262 in3\u003cbr\u003e• 4.3 L \/ 265 in3\u003cbr\u003e• 4.4 L \/ 267 in3\u003cbr\u003e• 4.6 L \/ 283 in3\u003cbr\u003e• 4.9 L \/ 302 in3\u003cbr\u003e• 5.0 L \/ 305 in3\u003cbr\u003e• 5.0 L \/ 307 in3\u003cbr\u003e• 5.4 L \/ 327 in3\u003cbr\u003e• 5.7 L \/ 350 in3\u003cbr\u003e• 6.6 L \/ 400 in3\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eChevrolet Chevelle \/ Nova \/ Camaro\u003cbr\u003eChevrolet C10 \/ K10 Trucks\u003cbr\u003eChevrolet Impala \/ El Camino\u003cbr\u003eStreet rod, muscle car, and custom Chevy builds\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eDesigned for GM Gen V LT direct-injection engine platforms.\u003cbr\u003eVerify pulley groove count, accessory spacing, and crankshaft fitment before installation.\u003cbr\u003eNot compatible with Gen III\/IV LS, Gen I Small Block Chevy, or Big Block Chevy engines.\u003cbr\u003eMini starter housing helps improve clearance around headers and oil pans.\u003cbr\u003eVerify staggered or straight mounting pattern requirements before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSPECIFCATIONS\u003c\/strong\u003e\u003cbr\u003eStarter Style: Mini\u003cbr\u003eStarter Type: Nippondenso\u003cbr\u003eAdjustable Mounting Block: Yes\u003cbr\u003eStarter Rotation: Standard\u003cbr\u003eMaximum Compression Ratio: 12.0:1\u003cbr\u003eGear Reduction Ratio: 4.0:1\u003cbr\u003eHorsepower: 1.9\u003cbr\u003eStarter Housing Material: Cast Aluminum\u003cbr\u003eMounting Block Material: Billet Aluminum\u003cbr\u003e\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49814517285160,"sku":"JM7007ABK","price":230.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/JM7007ABK_01.jpg?v=1739381991"},{"product_id":"ls-and-lt-ignition-coil-boot-and-spark-plug-wire-retainer-set","title":"LS and LT Ignition Coil Boot and Spark Plug Wire Retainer Set","description":"\u003cp\u003eFor ignition-system upgrades and replacement service, this wire set pairs high-quality cable construction with application-specific boot geometry for clean fitment and dependable spark transfer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpark Delivery \u0026amp; Ignition Performance\u003c\/strong\u003e\u003cbr\u003eThe wire construction to help transfer spark energy while reducing electrical interference in compatible ignition systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePremium High-Density Silicone Heat Protection\u003c\/strong\u003e\u003cbr\u003eThe premium high-density silicone insulation help provide heat resistance and long-term durability. Premium high-density silicone rated for up to 600°f supports routing near warm engine-bay components when installed with proper clearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBoot Configuration \u0026amp; Routing\u003c\/strong\u003e\u003cbr\u003eThe set uses application-matched boot configuration to support clean routing between the plugs and distributor or coil packs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; System Matching\u003c\/strong\u003e\u003cbr\u003eConfirm spark plug terminal style, coil or distributor configuration, cylinder routing order, separator placement, and heat clearance before installation. LS and LT applications should be matched by engine family and coil location rather than engine-code wording.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS BASED)\u003cbr\u003e• 4.8 L \/ 293 in3\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 5.7 L \/ 346 in3\u003cbr\u003e• 6.0 L \/ 364 in3\u003cbr\u003e• 6.2 L \/ 376 in3\u003cbr\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. V (LT BASED)\u003cbr\u003e• 6.2 L \/ 376 in3\u003cbr\u003e\u003cbr\u003eCOMMON VEHICLE APPLICATIONS:\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Corvette\u003cbr\u003eChevrolet Tahoe\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nCoil Boot Angle: 135 Degrees\u003cbr\u003e\nCoil Boot Color: Black\u003cbr\u003e\nCoil Boot Material: Silicone\u003cbr\u003e\nColor: Black\u003cbr\u003e\nGrade Type: Performance\u003cbr\u003e\nMaterial: Silicone\u003cbr\u003e\nPlug End Boot Degree: 135 deg.\u003cbr\u003e\nQuantity: Sold as a kit","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49903133983016,"sku":"81025-1","price":8.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81025-1_01.jpg?v=1751310588"},{"product_id":"gm-ls-4-flat-to-2-pin-alternator-adapter-cable","title":"GM LS 4-Flat to 2-Pin Alternator Adapter Cable","description":"\u003cp\u003eThis GM LS 4-Flat to 2-Pin Alternator Adapter Cable is designed to simplify alternator wiring when changing between GM alternator case styles. It helps connect the charging system cleanly during swaps, front drive changes, or alternator upgrades without cutting into the harness unnecessarily.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClean Conversion Wiring\u003c\/strong\u003e\u003cbr\u003e\nThe adapter helps bridge the listed alternator and harness styles so the charging system can be connected with a cleaner, more serviceable installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwap-Friendly Installation\u003c\/strong\u003e\u003cbr\u003e\nBuilt for GM charging system conversions, this cable is useful when updating from one alternator family to another while retaining a clean engine bay layout.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDurable Electrical Connection\u003c\/strong\u003e\u003cbr\u003e\nQuality terminals and wiring help maintain reliable charging system communication and reduce loose-connection issues.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdapts GM 4-flat to 2-pin alternators\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChevrolet Silverado 1500 \/ 2500 \/ 3500\u003c\/li\u003e\n\u003cli\u003eGMC Sierra 1500 \/ 2500 \/ 3500\u003c\/li\u003e\n\u003cli\u003eChevrolet Tahoe \/ Suburban\u003c\/li\u003e\n\u003cli\u003eGMC Yukon \/ Yukon XL\u003c\/li\u003e\n\u003cli\u003eChevrolet Camaro \/ Corvette (LS equipped)\u003c\/li\u003e\n\u003cli\u003ePontiac GTO \/ G8 (LS equipped)\u003c\/li\u003e\n\u003c\/ul\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\nCable Type: Alternator Harness Adapter\u003cbr\u003e\nEnd 1 Type: 2-pin\u003cbr\u003e\nEnd 2 Type: 4-flat\u003cbr\u003e\nLength: 6 in.\u003cbr\u003e\nQuantity: Sold individually\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49903134015784,"sku":"81029","price":30.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81029_03.jpg?v=1750172275"},{"product_id":"gm-ls-3-0-hp-high-torque-starter-chrome","title":"GM LS 3.0 HP High Torque Starter - Chrome","description":"\u003cp\u003e\u003cspan\u003eUpgrade your LS engine's starting system with a high-torque mini starter engineered for GM Gen III and Gen IV LS-based V8 applications. Featuring a powerful 3.0 horsepower motor and 3.75:1 gear reduction ratio, this starter delivers dependable cranking performance for street, performance, and LS swap builds.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCompatible with many 4.8L, 5.3L, 5.7L, and 6.0L LS engine combinations, including popular LS1, LS2, LS6, LQ4, and LQ9 applications, this starter is designed to provide reliable starting power while maintaining a compact footprint. The gear reduction design helps increase torque output for dependable hot and cold starts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe compact Tilton-style housing provides additional clearance around headers, oil pans, steering components, and other tight engine bay areas where traditional starters can create fitment challenges. An adjustable billet aluminum mounting block allows easier starter positioning and installation flexibility for a wide variety of LS-powered vehicles and engine swap projects.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFinished in a bright chrome housing, this starter adds a polished appearance to engine compartments while delivering the cranking power needed for performance-oriented LS applications. Whether replacing a worn factory starter or upgrading an LS swap, this high-torque mini starter delivers the power, clearance, and reliability needed for dependable engine starts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003eCompact Mini Starter Design\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe offset Tilton-style housing helps create additional clearance around headers, oil pans, steering linkage, and other engine bay components. Its compact footprint makes it a popular upgrade for performance builds, restoration projects, and LS engine swaps.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Torque Starting Performance\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe 3.0 HP motor and 3.75:1 gear reduction ratio work together to provide strong cranking performance for GM LS-based engine combinations. The gear reduction design helps improve starter efficiency while maintaining a lightweight, compact package.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS-BASED)\u003cbr\u003e• 4.8 L \/ 293 in3 (LR4)\u003cbr\u003e• 5.3 L \/ 325 in3 (L33, L59, LM4, LM7)\u003cbr\u003e• 5.7 L \/ 346 in3 (LS1, LS6)\u003cbr\u003e• 6.0 L \/ 364 in3 (LQ4, LQ9, LS2)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eChevrolet Chevelle \/ Nova \/ Camaro\u003cbr\u003eChevrolet C10 \/ K10 Trucks\u003cbr\u003eChevrolet Impala \/ El Camino\u003cbr\u003eStreet rod, muscle car, and custom Chevy builds\u003cbr\u003e\u003cbr\u003eNOTES\u003cbr\u003eDesigned for GM Gen III and Gen IV LS-based engine platforms. Verify oil pan, header, flexplate, and mounting clearance before installation. Mini starter housing helps improve clearance around headers and oil pans.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSPOECIFICATIONS\u003c\/strong\u003e\u003cbr\u003eStarter Style: Mini\u003cbr\u003eStarter Type: Tilton\u003cbr\u003eColor: Chrome\u003cbr\u003eAdjustable Mounting Block: Yes\u003cbr\u003eStarter Rotation: Standard\u003cbr\u003eMaximum Compression Ratio: 11.0:1\u003cbr\u003eGear Reduction Ratio: 3.75:1\u003cbr\u003eHorsepower: 3\u003cbr\u003eStarter Housing Material: Cast Aluminum\u003cbr\u003eMounting Block Material: Billet Aluminum\u003cbr\u003e\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49979546861864,"sku":"JM7002C","price":230.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm7002c-a.jpg?v=1732638640"},{"product_id":"gm-ls-3-0-hp-high-torque-starter-red","title":"GM LS 3.0 HP High Torque Starter - Red","description":"\u003cp\u003e\u003cspan\u003eUpgrade your LS engine's starting system with a high-torque mini starter engineered for GM Gen III and Gen IV LS-based V8 applications. Featuring a powerful 3.0 horsepower motor and 3.75:1 gear reduction ratio, this starter delivers dependable cranking performance for street, performance, and LS swap builds.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCompatible with many 4.8L, 5.3L, 5.7L, and 6.0L LS engine combinations, including popular LS1, LS2, LS6, LQ4, and LQ9 applications, this starter is designed to provide reliable starting power while maintaining a compact footprint. The gear reduction design helps increase torque output for dependable hot and cold starts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe compact Tilton-style housing provides additional clearance around headers, oil pans, steering components, and other tight engine bay areas where traditional starters can create fitment challenges. An adjustable billet aluminum mounting block allows easier starter positioning and installation flexibility for a wide variety of LS-powered vehicles and engine swap projects.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFinished in a bright red housing, this starter adds a polished appearance to engine compartments while delivering the cranking power needed for performance-oriented LS applications. Whether replacing a worn factory starter or upgrading an LS swap, this high-torque mini starter delivers the power, clearance, and reliability needed for dependable engine starts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003eCompact Mini Starter Design\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe offset Tilton-style housing helps create additional clearance around headers, oil pans, steering linkage, and other engine bay components. Its compact footprint makes it a popular upgrade for performance builds, restoration projects, and LS engine swaps.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Torque Starting Performance\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe 3.0 HP motor and 3.75:1 gear reduction ratio work together to provide strong cranking performance for GM LS-based engine combinations. The gear reduction design helps improve starter efficiency while maintaining a lightweight, compact package.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS-BASED)\u003cbr\u003e• 4.8 L \/ 293 in3 (LR4)\u003cbr\u003e• 5.3 L \/ 325 in3 (L33, L59, LM4, LM7)\u003cbr\u003e• 5.7 L \/ 346 in3 (LS1, LS6)\u003cbr\u003e• 6.0 L \/ 364 in3 (LQ4, LQ9, LS2)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eChevrolet Chevelle \/ Nova \/ Camaro\u003cbr\u003eChevrolet C10 \/ K10 Trucks\u003cbr\u003eChevrolet Impala \/ El Camino\u003cbr\u003eStreet rod, muscle car, and custom Chevy builds\u003cbr\u003e\u003cbr\u003eNOTES\u003cbr\u003eDesigned for GM Gen III and Gen IV LS-based engine platforms. Verify oil pan, header, flexplate, and mounting clearance before installation. Mini starter housing helps improve clearance around headers and oil pans.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSPOECIFICATIONS\u003c\/strong\u003e\u003cbr\u003eStarter Style: Mini\u003cbr\u003eStarter Type: Tilton\u003cbr\u003eColor: Red\u003cbr\u003eAdjustable Mounting Block: Yes\u003cbr\u003eStarter Rotation: Standard\u003cbr\u003eMaximum Compression Ratio: 11.0:1\u003cbr\u003eGear Reduction Ratio: 3.75:1\u003cbr\u003eHorsepower: 3\u003cbr\u003eStarter Housing Material: Cast Aluminum\u003cbr\u003eMounting Block Material: Billet Aluminum\u003cbr\u003e\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49979559051560,"sku":"JM7002R","price":203.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm7002r-a.jpg?v=1732638640"},{"product_id":"chevy-small-block-big-block-v8-staggered-mount-1-9-hp-mini-starter-chrome","title":"Chevy Small Block \u0026 Big Block V8 Staggered Mount 1.9 HP Mini Starter - Chrome","description":"\u003cp\u003eUpgrade your Chevrolet V8 starting system with a compact, high-torque mini starter designed for Small Block and Big Block Chevy engines. Featuring a powerful 1.9 horsepower motor and a 4:1 gear reduction ratio, this starter delivers dependable cranking performance for street, restoration, and performance applications.\u003c\/p\u003e\n\u003cp\u003eThe compact Nippondenso-style design provides additional clearance around headers, oil pans, and other engine components where traditional full-size starters may create fitment challenges. Its adjustable billet aluminum mounting block allows easier positioning during installation while supporting both inline and staggered mounting configurations.\u003c\/p\u003e\n\u003cp\u003eEngineered with high-quality internal components, this starter is built to provide reliable starting performance in a wide range of Chevrolet V8 applications. The chrome finish adds a polished appearance that complements muscle cars, hot rods, street rods, classic trucks, and custom engine builds.\u003c\/p\u003e\n\u003cp\u003eWhether replacing a worn factory starter or upgrading to a compact mini starter, this unit delivers the power, clearance, and reliability needed for dependable engine starts.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompact Mini Starter Design\u003c\/strong\u003e\u003cbr\u003eThe Nippondenso-style housing provides a compact footprint that helps improve clearance around headers, exhaust components, oil pans, and tight engine bay layouts. Its smaller size makes it a popular upgrade for performance builds and restoration projects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Torque Starting Performance\u003c\/strong\u003e\u003cbr\u003eThe 1.9 HP motor combined with a 4:1 gear reduction ratio helps deliver strong cranking power while maintaining a compact design. This combination is suitable for many street-driven, restoration, and performance-oriented Chevrolet V8 applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation and Compatibility\u003c\/strong\u003e\u003cbr\u003eFits many Small Block and Big Block Chevy V8 applications\u003cbr\u003eSupports inline and staggered bolt pattern mounting\u003cbr\u003eFits 168-tooth flywheel applications\u003cbr\u003eAdjustable billet mounting block included\u003cbr\u003eStandard rotation design\u003cbr\u003eMounting hardware included where applicable\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET BIG BLOCK V8 GEN. I (W)\u003cbr\u003e• 5.7 L \/ 348 in3\u003cbr\u003e• 6.7 L \/ 409 in3\u003cbr\u003e• 7.0 L \/ 427 in3\u003cbr\u003e\u003cbr\u003eCHEVROLET BIG BLOCK V8 GEN. II (MARK IV)\u003cbr\u003e• 6.5 L \/ 396 in3\u003cbr\u003e• 6.6 L \/ 402 in3\u003cbr\u003e• 7.0 L \/ 427 in3\u003cbr\u003e• 7.4 L \/ 454 in3\u003cbr\u003e\u003cbr\u003eCHEVROLET BIG BLOCK V8 GEN. V\u003cbr\u003e• 7.4 L \/ 454 in3\u003cbr\u003e\u003cbr\u003eCHEVROLET BIG BLOCK V8 GEN. VI\u003cbr\u003e• 7.4 L \/ 454 in3 commonly referred to as Vortec 7400\u003cbr\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. I\u003cbr\u003e• 4.3 L \/ 262 in3\u003cbr\u003e• 4.3 L \/ 265 in3\u003cbr\u003e• 4.4 L \/ 267 in3\u003cbr\u003e• 4.6 L \/ 283 in3\u003cbr\u003e• 4.9 L \/ 302 in3\u003cbr\u003e• 5.0 L \/ 305 in3\u003cbr\u003e• 5.0 L \/ 307 in3\u003cbr\u003e• 5.4 L \/ 327 in3\u003cbr\u003e• 5.7 L \/ 350 in3\u003cbr\u003e• 6.6 L \/ 400 in3\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eChevrolet Chevelle \/ Nova \/ Camaro\u003cbr\u003eChevrolet C10 \/ K10 Trucks\u003cbr\u003eChevrolet Impala \/ El Camino\u003cbr\u003eStreet rod, muscle car, and custom Chevy builds\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eDesigned for GM Gen V LT direct-injection engine platforms.\u003cbr\u003eVerify pulley groove count, accessory spacing, and crankshaft fitment before installation.\u003cbr\u003eNot compatible with Gen III\/IV LS, Gen I Small Block Chevy, or Big Block Chevy engines.\u003cbr\u003eMini starter housing helps improve clearance around headers and oil pans.\u003cbr\u003eVerify staggered or straight mounting pattern requirements before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSPECIFCATIONS\u003c\/strong\u003e\u003cbr\u003eStarter Style: Mini\u003cbr\u003eStarter Type: Nippondenso\u003cbr\u003eAdjustable Mounting Block: Yes\u003cbr\u003eStarter Rotation: Standard\u003cbr\u003eMaximum Compression Ratio: 12.0:1\u003cbr\u003eGear Reduction Ratio: 4.0:1\u003cbr\u003eHorsepower: 1.9\u003cbr\u003eStarter Housing Material: Cast Aluminum\u003cbr\u003eMounting Block Material: Billet Aluminum\u003cbr\u003e\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49979721089320,"sku":"JM7007C","price":258.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/JM7007C_01.jpg?v=1739381991"},{"product_id":"chevy-small-block-big-block-v8-staggered-mount-1-9-hp-mini-starter-red","title":"Chevy Small Block \u0026 Big Block V8 Staggered Mount 1.9 HP Mini Starter - Red","description":"\u003cp\u003eUpgrade your Chevrolet V8 starting system with a compact, high-torque mini starter designed for Small Block and Big Block Chevy engines. Featuring a powerful 1.9 horsepower motor and a 4:1 gear reduction ratio, this starter delivers dependable cranking performance for street, restoration, and performance applications.\u003c\/p\u003e\n\u003cp\u003eThe compact Nippondenso-style design provides additional clearance around headers, oil pans, and other engine components where traditional full-size starters may create fitment challenges. Its adjustable billet aluminum mounting block allows easier positioning during installation while supporting both inline and staggered mounting configurations.\u003c\/p\u003e\n\u003cp\u003eEngineered with high-quality internal components, this starter is built to provide reliable starting performance in a wide range of Chevrolet V8 applications. The chrome finish adds a polished appearance that complements muscle cars, hot rods, street rods, classic trucks, and custom engine builds.\u003c\/p\u003e\n\u003cp\u003eWhether replacing a worn factory starter or upgrading to a compact mini starter, this unit delivers the power, clearance, and reliability needed for dependable engine starts.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompact Mini Starter Design\u003c\/strong\u003e\u003cbr\u003eThe Nippondenso-style housing provides a compact footprint that helps improve clearance around headers, exhaust components, oil pans, and tight engine bay layouts. Its smaller size makes it a popular upgrade for performance builds and restoration projects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Torque Starting Performance\u003c\/strong\u003e\u003cbr\u003eThe 1.9 HP motor combined with a 4:1 gear reduction ratio helps deliver strong cranking power while maintaining a compact design. This combination is suitable for many street-driven, restoration, and performance-oriented Chevrolet V8 applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation and Compatibility\u003c\/strong\u003e\u003cbr\u003eFits many Small Block and Big Block Chevy V8 applications\u003cbr\u003eSupports inline and staggered bolt pattern mounting\u003cbr\u003eFits 168-tooth flywheel applications\u003cbr\u003eAdjustable billet mounting block included\u003cbr\u003eStandard rotation design\u003cbr\u003eMounting hardware included where applicable\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET BIG BLOCK V8 GEN. I (W)\u003cbr\u003e• 5.7 L \/ 348 in3\u003cbr\u003e• 6.7 L \/ 409 in3\u003cbr\u003e• 7.0 L \/ 427 in3\u003cbr\u003e\u003cbr\u003eCHEVROLET BIG BLOCK V8 GEN. II (MARK IV)\u003cbr\u003e• 6.5 L \/ 396 in3\u003cbr\u003e• 6.6 L \/ 402 in3\u003cbr\u003e• 7.0 L \/ 427 in3\u003cbr\u003e• 7.4 L \/ 454 in3\u003cbr\u003e\u003cbr\u003eCHEVROLET BIG BLOCK V8 GEN. V\u003cbr\u003e• 7.4 L \/ 454 in3\u003cbr\u003e\u003cbr\u003eCHEVROLET BIG BLOCK V8 GEN. VI\u003cbr\u003e• 7.4 L \/ 454 in3 commonly referred to as Vortec 7400\u003cbr\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. I\u003cbr\u003e• 4.3 L \/ 262 in3\u003cbr\u003e• 4.3 L \/ 265 in3\u003cbr\u003e• 4.4 L \/ 267 in3\u003cbr\u003e• 4.6 L \/ 283 in3\u003cbr\u003e• 4.9 L \/ 302 in3\u003cbr\u003e• 5.0 L \/ 305 in3\u003cbr\u003e• 5.0 L \/ 307 in3\u003cbr\u003e• 5.4 L \/ 327 in3\u003cbr\u003e• 5.7 L \/ 350 in3\u003cbr\u003e• 6.6 L \/ 400 in3\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eChevrolet Chevelle \/ Nova \/ Camaro\u003cbr\u003eChevrolet C10 \/ K10 Trucks\u003cbr\u003eChevrolet Impala \/ El Camino\u003cbr\u003eStreet rod, muscle car, and custom Chevy builds\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eDesigned for GM Gen V LT direct-injection engine platforms.\u003cbr\u003eVerify pulley groove count, accessory spacing, and crankshaft fitment before installation.\u003cbr\u003eNot compatible with Gen III\/IV LS, Gen I Small Block Chevy, or Big Block Chevy engines.\u003cbr\u003eMini starter housing helps improve clearance around headers and oil pans.\u003cbr\u003eVerify staggered or straight mounting pattern requirements before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSPECIFCATIONS\u003c\/strong\u003e\u003cbr\u003eStarter Style: Mini\u003cbr\u003eStarter Type: Nippondenso\u003cbr\u003eAdjustable Mounting Block: Yes\u003cbr\u003eStarter Rotation: Standard\u003cbr\u003eMaximum Compression Ratio: 12.0:1\u003cbr\u003eGear Reduction Ratio: 4.0:1\u003cbr\u003eHorsepower: 1.9\u003cbr\u003eStarter Housing Material: Cast Aluminum\u003cbr\u003eMounting Block Material: Billet Aluminum\u003cbr\u003e\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49979729871144,"sku":"JM7007R","price":230.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/JM7007R_01.jpg?v=1739381991"},{"product_id":"chevy-small-block-big-block-v8-staggered-mount-1-9-hp-mini-starter-black","title":"Chevy Small Block \u0026 Big Block V8 Staggered Mount 1.9 HP Mini Starter - Black","description":"\u003cp\u003eUpgrade your Chevrolet V8 starting system with a compact, high-torque mini starter designed for Small Block and Big Block Chevy engines. Featuring a powerful 1.9 horsepower motor and a 4:1 gear reduction ratio, this starter delivers dependable cranking performance for street, restoration, and performance applications.\u003c\/p\u003e\n\u003cp\u003eThe compact Nippondenso-style design provides additional clearance around headers, oil pans, and other engine components where traditional full-size starters may create fitment challenges. Its adjustable billet aluminum mounting block allows easier positioning during installation while supporting both inline and staggered mounting configurations.\u003c\/p\u003e\n\u003cp\u003eEngineered with high-quality internal components, this starter is built to provide reliable starting performance in a wide range of Chevrolet V8 applications. The chrome finish adds a polished appearance that complements muscle cars, hot rods, street rods, classic trucks, and custom engine builds.\u003c\/p\u003e\n\u003cp\u003eWhether replacing a worn factory starter or upgrading to a compact mini starter, this unit delivers the power, clearance, and reliability needed for dependable engine starts.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompact Mini Starter Design\u003c\/strong\u003e\u003cbr\u003eThe Nippondenso-style housing provides a compact footprint that helps improve clearance around headers, exhaust components, oil pans, and tight engine bay layouts. Its smaller size makes it a popular upgrade for performance builds and restoration projects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Torque Starting Performance\u003c\/strong\u003e\u003cbr\u003eThe 1.9 HP motor combined with a 4:1 gear reduction ratio helps deliver strong cranking power while maintaining a compact design. This combination is suitable for many street-driven, restoration, and performance-oriented Chevrolet V8 applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation and Compatibility\u003c\/strong\u003e\u003cbr\u003eFits many Small Block and Big Block Chevy V8 applications\u003cbr\u003eSupports inline and staggered bolt pattern mounting\u003cbr\u003eFits 168-tooth flywheel applications\u003cbr\u003eAdjustable billet mounting block included\u003cbr\u003eStandard rotation design\u003cbr\u003eMounting hardware included where applicable\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET BIG BLOCK V8 GEN. I (W)\u003cbr\u003e• 5.7 L \/ 348 in3\u003cbr\u003e• 6.7 L \/ 409 in3\u003cbr\u003e• 7.0 L \/ 427 in3\u003cbr\u003e\u003cbr\u003eCHEVROLET BIG BLOCK V8 GEN. II (MARK IV)\u003cbr\u003e• 6.5 L \/ 396 in3\u003cbr\u003e• 6.6 L \/ 402 in3\u003cbr\u003e• 7.0 L \/ 427 in3\u003cbr\u003e• 7.4 L \/ 454 in3\u003cbr\u003e\u003cbr\u003eCHEVROLET BIG BLOCK V8 GEN. V\u003cbr\u003e• 7.4 L \/ 454 in3\u003cbr\u003e\u003cbr\u003eCHEVROLET BIG BLOCK V8 GEN. VI\u003cbr\u003e• 7.4 L \/ 454 in3 commonly referred to as Vortec 7400\u003cbr\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. I\u003cbr\u003e• 4.3 L \/ 262 in3\u003cbr\u003e• 4.3 L \/ 265 in3\u003cbr\u003e• 4.4 L \/ 267 in3\u003cbr\u003e• 4.6 L \/ 283 in3\u003cbr\u003e• 4.9 L \/ 302 in3\u003cbr\u003e• 5.0 L \/ 305 in3\u003cbr\u003e• 5.0 L \/ 307 in3\u003cbr\u003e• 5.4 L \/ 327 in3\u003cbr\u003e• 5.7 L \/ 350 in3\u003cbr\u003e• 6.6 L \/ 400 in3\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eChevrolet Chevelle \/ Nova \/ Camaro\u003cbr\u003eChevrolet C10 \/ K10 Trucks\u003cbr\u003eChevrolet Impala \/ El Camino\u003cbr\u003eStreet rod, muscle car, and custom Chevy builds\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eDesigned for GM Gen V LT direct-injection engine platforms.\u003cbr\u003eVerify pulley groove count, accessory spacing, and crankshaft fitment before installation.\u003cbr\u003eNot compatible with Gen III\/IV LS, Gen I Small Block Chevy, or Big Block Chevy engines.\u003cbr\u003eMini starter housing helps improve clearance around headers and oil pans.\u003cbr\u003eVerify staggered or straight mounting pattern requirements before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSPECIFCATIONS\u003c\/strong\u003e\u003cbr\u003eStarter Style: Mini\u003cbr\u003eStarter Type: Nippondenso\u003cbr\u003eAdjustable Mounting Block: Yes\u003cbr\u003eStarter Rotation: Standard\u003cbr\u003eMaximum Compression Ratio: 12.0:1\u003cbr\u003eGear Reduction Ratio: 4.0:1\u003cbr\u003eHorsepower: 1.9\u003cbr\u003eStarter Housing Material: Cast Aluminum\u003cbr\u003eMounting Block Material: Billet Aluminum\u003cbr\u003e\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49979745272104,"sku":"JM7007BK","price":230.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/JM7007BK_01_2516579e-c0be-491a-9905-4cb0b7e316e0.jpg?v=1741029218"},{"product_id":"8-5mm-ls-truck-black-ignition-wires-with-straight-ceramic-plug-boots-white","title":"8.5mm LS Truck Black Ignition Wires with Straight Ceramic Plug Boots - White","description":"\u003cp\u003eThis ignition wire set is configured for GM LS truck ignition applications with Straight spark plug boot configuration, durable boot materials, and suppression-focused construction for reliable street performance use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpark Delivery \u0026amp; Ignition Performance\u003c\/strong\u003e\u003cbr\u003eThe 8.5 mm outside diameter uses spiral wound core material with radio frequency interference noise suppression to help transfer spark energy while reducing electrical interference in compatible ignition systems. Resistance is listed at 500 Ohms, which should be matched to the ignition setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePremium High-Density Silicone Heat Protection\u003c\/strong\u003e\u003cbr\u003eThe black high-density silicone insulation and ceramic plug boot material help provide heat resistance and long-term durability. Premium high-density silicone with ceramic plug boots rated for elevated underhood heat supports routing near warm engine-bay components when installed with proper clearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBoot Configuration \u0026amp; Routing\u003c\/strong\u003e\u003cbr\u003eThe set uses Straight spark plug boot configuration with 135° coil\/distributor-end boot degree and Coil Pack terminal compatibility to support clean routing between the plugs and distributor or coil packs. Wire separators included: Yes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; System Matching\u003c\/strong\u003e\u003cbr\u003eFitment type is listed as Universal. Confirm spark plug terminal style, coil or distributor configuration, cylinder routing order, separator placement, and heat clearance before installation. LS and LT applications should be matched by engine family and coil location rather than engine-code wording.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eGM 90° V6\u003cbr\u003e• 4.3 L \/ 262 in3 (Vortec 4300)\u003cbr\u003e\u003cbr\u003e'GM LS Series V8 applications\u003cbr\u003e• 4.8 L \/ 294 in3\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 6.0 L \/ 364 in3\u003cbr\u003e• 6.2 L \/ 376 in3\u003cbr\u003e\u003cbr\u003e'14-'16 Chevrolet Small Block V8 Gen. V (LT-Based)\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 6.2 L \/ 376 in3\u003cbr\u003e\u003cbr\u003eNOTE: Fits many 1999-2015 GM LS truck and '14-'16 LT applications\u003cbr\u003e\u003cbr\u003eCOMMON VEHICLE APPLICATIONS:\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Tahoe\u003cbr\u003eChevrolet Suburban\u003cbr\u003eCadillac Escalade\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nBoot Type: Straight\u003cbr\u003e\nCoil End Boot Color: Black\u003cbr\u003e\nCore Material: Spiral Wound\u003cbr\u003e\nDistributor Coil End Boot Degree: 135°\u003cbr\u003e\nDistributor Coil End Terminal Type: Coil Pack\u003cbr\u003e\nInsulation Color: Black\u003cbr\u003e\nInsulation Material: High-density Silicone\u003cbr\u003e\nNoise Suppression Type: Radio Frequency Interference\u003cbr\u003e\nOutside Diameter: 8.5 mm\u003cbr\u003e\nQuantity: Full Set of 8 Plug Wires\u003cbr\u003e\nResistance: 500 Ohms\u003cbr\u003e\nSpark Plug Boot Material: Ceramic\u003cbr\u003e\nSpark Plug End Boot Color: White\u003cbr\u003e\nSpark Plug End Boot Degree: Straight\u003cbr\u003e\nSpark Plug End Boot Quantity (Straight): 8\u003cbr\u003e\nSpark Plug Wire Resistance: 500 Ohms\u003cbr\u003e\nUniversal Or Specific Fit: Universal\u003cbr\u003e\nWire 1 Length: 12 in.\u003cbr\u003e\nWire 2 Length: 12 in.\u003cbr\u003e\nWire 3 Length: 12 in.\u003cbr\u003e\nWire 4 Length: 12 in.\u003cbr\u003e\nWire 5 Length: 12 in.\u003cbr\u003e\nWire 6 Length: 12 in.\u003cbr\u003e\nWire 7 Length: 12 in.\u003cbr\u003e\nWire 8 Length: 12 in.\u003cbr\u003e\nWire Separators Included: Yes","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49995342872872,"sku":"81027CE","price":108.64,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81027ce_1600_68cf405a-dc57-4bf7-b8df-aa68299845b7.jpg?v=1734478691"},{"product_id":"gm-ls-truck-8-5mm-ignition-wires-with-180-plug-boots-red","title":"GM LS Truck 8.5mm Ignition Wires with 180° Plug Boots - Red","description":"\u003cp\u003eFor ignition-system upgrades and replacement service, this wire set pairs 8.5 mm cable construction with application-specific boot geometry for clean fitment and dependable spark transfer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpark Delivery \u0026amp; Ignition Performance\u003c\/strong\u003e\u003cbr\u003eThe 8.5 mm outside diameter uses spiral wound core material with radio frequency interference noise suppression to help transfer spark energy while reducing electrical interference in compatible ignition systems. Resistance is listed at 500 Ohms, which should be matched to the ignition setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePremium High-Density Silicone Heat Protection\u003c\/strong\u003e\u003cbr\u003eThe red high-density silicone insulation and silicone plug boot material help provide heat resistance and long-term durability. Premium high-density silicone rated for up to 600°f supports routing near warm engine-bay components when installed with proper clearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBoot Configuration \u0026amp; Routing\u003c\/strong\u003e\u003cbr\u003eThe set uses Straight spark plug boot configuration with 135° coil\/distributor-end boot degree and Coil Pack terminal compatibility to support clean routing between the plugs and distributor or coil packs. Wire separators included: Yes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; System Matching\u003c\/strong\u003e\u003cbr\u003eFitment type is listed as Universal. Confirm spark plug terminal style, coil or distributor configuration, cylinder routing order, separator placement, and heat clearance before installation. LS and LT applications should be matched by engine family and coil location rather than engine-code wording.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eGM 90° V6\u003cbr\u003e• 4.3 L \/ 262 in3 (Vortec 4300)\u003cbr\u003e\u003cbr\u003e'GM LS Series V8 applications\u003cbr\u003e• 4.8 L \/ 294 in3\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 6.0 L \/ 364 in3\u003cbr\u003e• 6.2 L \/ 376 in3\u003cbr\u003e\u003cbr\u003e'14-'16 Chevrolet Small Block V8 Gen. V (LT-Based)\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 6.2 L \/ 376 in3\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTES:\u003c\/b\u003e Fits many 1999-2015 GM LS truck and '14-'16 LT applications.\u003cbr\u003e\u003cbr\u003eCOMMON VEHICLE APPLICATIONS:\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Tahoe\u003cbr\u003eChevrolet Suburban\u003cbr\u003eCadillac Escalade\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nBoot Type: Straight\u003cbr\u003e\nCoil End Boot Color: Black\u003cbr\u003e\nCore Material: Spiral Wound\u003cbr\u003e\nDistributor Coil End Boot Degree: 135°\u003cbr\u003e\nDistributor Coil End Terminal Type: Coil Pack\u003cbr\u003e\nInsulation Color: Red\u003cbr\u003e\nInsulation Material: High-density Silicone\u003cbr\u003e\nNoise Suppression Type: Radio Frequency Interference\u003cbr\u003e\nOutside Diameter: 8.5 mm\u003cbr\u003e\nQuantity: Full Set of 8 Plug Wires\u003cbr\u003e\nResistance: 500 Ohms\u003cbr\u003e\nSpark Plug Boot Material: Silicone\u003cbr\u003e\nSpark Plug End Boot Color: Red\u003cbr\u003e\nSpark Plug End Boot Degree: Straight\u003cbr\u003e\nSpark Plug End Boot Quantity (Straight): 8\u003cbr\u003e\nSpark Plug Wire Resistance: 500 Ohms\u003cbr\u003e\nUniversal Or Specific Fit: Universal\u003cbr\u003e\nWire 1 Length: 12 in.\u003cbr\u003e\nWire 2 Length: 12 in.\u003cbr\u003e\nWire 3 Length: 12 in.\u003cbr\u003e\nWire 4 Length: 12 in.\u003cbr\u003e\nWire 5 Length: 12 in.\u003cbr\u003e\nWire 6 Length: 12 in.\u003cbr\u003e\nWire 7 Length: 12 in.\u003cbr\u003e\nWire 8 Length: 12 in.\u003cbr\u003e\nWire Separators Included: Yes","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49995348574504,"sku":"81227","price":35.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81227_1600_936d6aa0-32c2-42a8-ba85-09f7663a3ae5.jpg?v=1734475738"},{"product_id":"8-5mm-ls-lt-universal-black-ignition-wires-with-straight-ceramic-plug-boots-white","title":"8.5mm LS\/LT Universal Black Ignition Wires with Straight Ceramic Plug Boots - White","description":"\u003cp\u003eBuilt for GM LS\/LT Series ignition applications, this ignition wire set combines 8.5 mm wire construction, Straight spark plug boot configuration, and durable insulation for dependable spark delivery in properly matched applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpark Delivery \u0026amp; Ignition Performance\u003c\/strong\u003e\u003cbr\u003eThe 8.5 mm outside diameter uses spiral wound core material with radio frequency interference noise suppression to help transfer spark energy while reducing electrical interference in compatible ignition systems. Resistance is listed at 500 Ohms, which should be matched to the ignition setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePremium High-Density Silicone Heat Protection\u003c\/strong\u003e\u003cbr\u003eThe black high-density silicone insulation and ceramic plug boot material help provide heat resistance and long-term durability. Premium high-density silicone with ceramic plug boots rated for elevated underhood heat supports routing near warm engine-bay components when installed with proper clearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBoot Configuration \u0026amp; Routing\u003c\/strong\u003e\u003cbr\u003eThe set uses Straight spark plug boot configuration with 135 deg. coil\/distributor-end boot degree and Coil Pack terminal compatibility to support clean routing between the plugs and distributor or coil packs. Wire separators included: Yes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; System Matching\u003c\/strong\u003e\u003cbr\u003eFitment type is listed as Universal. Confirm spark plug terminal style, coil or distributor configuration, cylinder routing order, separator placement, and heat clearance before installation. LS and LT applications should be matched by engine family and coil location rather than engine-code wording.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003e'GM LS Series V8 applications\u003cbr\u003e\u003cbr\u003eNOTE: Comes with spark plug ends installed and components for connecting to LS ignition coils.\u003cbr\u003e\u003cbr\u003eCOMMON VEHICLE APPLICATIONS:\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Corvette\u003cbr\u003eChevrolet Tahoe\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nBoot Type: Straight\u003cbr\u003e\nCoil End Boot Color: Black\u003cbr\u003e\nCore Material: Spiral Wound\u003cbr\u003e\nDistributor Coil End Boot Degree: 135 deg.\u003cbr\u003e\nDistributor Coil End Terminal Type: Coil Pack\u003cbr\u003e\nInsulation Color: Black\u003cbr\u003e\nInsulation Material: High-density Silicone\u003cbr\u003e\nNoise Suppression Type: Radio Frequency Interference\u003cbr\u003e\nOutside Diameter: 8.5 mm\u003cbr\u003e\nQuantity: Full Set of 8 Plug Wires\u003cbr\u003e\nResistance: 500 Ohms\u003cbr\u003e\nSpark Plug Boot Material: Ceramic\u003cbr\u003e\nSpark Plug End Boot Color: White\u003cbr\u003e\nSpark Plug End Boot Degree: Straight\u003cbr\u003e\nSpark Plug End Boot Quantity Straight: 8\u003cbr\u003e\nSpark Plug Wire Resistance: 500 Ohms\u003cbr\u003e\nUniversal Or Specific Fit: Universal\u003cbr\u003e\nWire 1 Length: 43 in.\u003cbr\u003e\nWire 2 Length: 43 in.\u003cbr\u003e\nWire 3 Length: 43 in.\u003cbr\u003e\nWire 4 Length: 43 in.\u003cbr\u003e\nWire 5 Length: 43 in.\u003cbr\u003e\nWire 6 Length: 43 in.\u003cbr\u003e\nWire 7 Length: 43 in.\u003cbr\u003e\nWire 8 Length: 43 in.\u003cbr\u003e\nWire Separators Included: Yes","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49995370725672,"sku":"81025CE","price":108.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81025ce_001_41e95ede-889b-4813-9b2a-b492bb0a68af.jpg?v=1734479009"},{"product_id":"universal-ls-lt-spark-plug-wire-set-8-5mm-with-180-plug-boots-red","title":"Universal LS\/LT Spark Plug Wire Set, 8.5mm with 180° Plug Boots  - Red","description":"\u003cp\u003eDesigned for GM LS\/LT Series ignition applications, this spark plug wire set helps support clean routing, stable ignition performance, and long-term heat resistance around tight engine-bay layouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpark Delivery \u0026amp; Ignition Performance\u003c\/strong\u003e\u003cbr\u003eThe 8.5 mm outside diameter uses spiral wound core material with radio frequency interference noise suppression to help transfer spark energy while reducing electrical interference in compatible ignition systems. Resistance is listed at 500 Ohms, which should be matched to the ignition setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePremium High-Density Silicone Heat Protection\u003c\/strong\u003e\u003cbr\u003eThe black high-density silicone insulation and silicone plug boot material help provide heat resistance and long-term durability. Premium high-density silicone rated for up to 600°f supports routing near warm engine-bay components when installed with proper clearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBoot Configuration \u0026amp; Routing\u003c\/strong\u003e\u003cbr\u003eThe set uses Straight spark plug boot configuration with 90° coil\/distributor-end boot degree and Coil Pack terminal compatibility to support clean routing between the plugs and distributor or coil packs. Wire separators included: Yes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; System Matching\u003c\/strong\u003e\u003cbr\u003eFitment type is listed as Universal. Confirm spark plug terminal style, coil or distributor configuration, cylinder routing order, separator placement, and heat clearance before installation. LS and LT applications should be matched by engine family and coil location rather than engine-code wording.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eGM LS Series V8 applications\u003cbr\u003e\u003cbr\u003eNote:\u003cbr\u003eComes with spark plug ends installed and components for connecting to LS ignition coils.\u003cbr\u003e\u003cbr\u003eCOMMON VEHICLE APPLICATIONS:\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Corvette\u003cbr\u003eChevrolet Tahoe\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nBoot Type: Straight\u003cbr\u003e\nCoil End Boot Color: Black\u003cbr\u003e\nCore Material: Spiral Wound\u003cbr\u003e\nDistributor Coil End Boot Degree: 90°\u003cbr\u003e\nDistributor Coil End Terminal Type: Coil Pack\u003cbr\u003e\nInsulation Color: Black\u003cbr\u003e\nInsulation Material: High-density Silicone\u003cbr\u003e\nNoise Suppression Type: Radio Frequency Interference\u003cbr\u003e\nOutside Diameter: 8.5 mm\u003cbr\u003e\nQuantity: Full Set of 8 Plug Wires\u003cbr\u003e\nResistance: 500 Ohms\u003cbr\u003e\nSpark Plug Boot Material: Silicone\u003cbr\u003e\nSpark Plug End Boot Color: Red\u003cbr\u003e\nSpark Plug End Boot Degree: Straight\u003cbr\u003e\nSpark Plug End Boot Quantity (Straight): 8\u003cbr\u003e\nSpark Plug Wire Resistance: 500 Ohms\u003cbr\u003e\nUniversal Or Specific Fit: Universal\u003cbr\u003e\nWire 1 Length: 43 in.\u003cbr\u003e\nWire 2 Length: 43 in.\u003cbr\u003e\nWire 3 Length: 43 in.\u003cbr\u003e\nWire 4 Length: 43 in.\u003cbr\u003e\nWire 5 Length: 43 in.\u003cbr\u003e\nWire 6 Length: 43 in.\u003cbr\u003e\nWire 7 Length: 43 in.\u003cbr\u003e\nWire 8 Length: 43 in.\u003cbr\u003e\nWire Separators Included: Yes","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49995373936936,"sku":"81225","price":40.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81225_001_2e1eabbc-f9fd-4f8d-816a-2ec331da49c9.jpg?v=1741105403"},{"product_id":"universal-gm-ls-8-5mm-ignition-wires-with-135-ceramic-plug-boots-white","title":"Universal GM LS 8.5mm Ignition Wires with 135° Ceramic Plug Boots - White","description":"\u003cp\u003eThis ignition wire set is configured for GM LS\/LT Series ignition applications with 135° spark plug boot configuration, durable boot materials, and suppression-focused construction for reliable street performance use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpark Delivery \u0026amp; Ignition Performance\u003c\/strong\u003e\u003cbr\u003eThe 8.5 mm outside diameter uses spiral wound core material with radio frequency interference noise suppression to help transfer spark energy while reducing electrical interference in compatible ignition systems. Resistance is listed at 500 Ohms, which should be matched to the ignition setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePremium High-Density Silicone Heat Protection\u003c\/strong\u003e\u003cbr\u003eThe black high-density silicone insulation and ceramic plug boot material help provide heat resistance and long-term durability. Premium high-density silicone with ceramic plug boots rated for elevated underhood heat supports routing near warm engine-bay components when installed with proper clearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBoot Configuration \u0026amp; Routing\u003c\/strong\u003e\u003cbr\u003eThe set uses 135° spark plug boot configuration with 135° coil\/distributor-end boot degree and Coil Pack terminal compatibility to support clean routing between the plugs and distributor or coil packs. Wire separators included: Yes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; System Matching\u003c\/strong\u003e\u003cbr\u003eFitment type is listed as Universal. Confirm spark plug terminal style, coil or distributor configuration, cylinder routing order, separator placement, and heat clearance before installation. LS and LT applications should be matched by engine family and coil location rather than engine-code wording.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eGM LS Series V8 applications\u003cbr\u003e• 4.8 L \/ 294 in3\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 5.7 L \/ 346 in3\u003cbr\u003e• 6.0 L \/ 364 in3\u003cbr\u003e• 6.2 L \/ 376 in3\u003cbr\u003e\u003cbr\u003e'14-'16 Chevrolet Small Block V8 Gen. V (LT-Based)\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 6.2 L \/ 376 in3\u003cbr\u003e\u003cbr\u003eNOTE: Fits small block generations 3,4, and 5 LS and LT applications.\u003cbr\u003e\u003cbr\u003eCOMMON VEHICLE APPLICATIONS:\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Corvette\u003cbr\u003eChevrolet Tahoe\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nBoot Type: 135°\u003cbr\u003e\nCoil End Boot Color: Black\u003cbr\u003e\nCore Material: Spiral Wound\u003cbr\u003e\nDistributor Coil End Boot Degree: 135°\u003cbr\u003e\nDistributor Coil End Terminal Type: Coil Pack\u003cbr\u003e\nInsulation Color: Black\u003cbr\u003e\nInsulation Material: High-density Silicone\u003cbr\u003e\nNoise Suppression Type: Radio Frequency Interference\u003cbr\u003e\nOutside Diameter: 8.5 mm\u003cbr\u003e\nQuantity: Full Set of 8 Plug Wires\u003cbr\u003e\nResistance: 500 Ohms\u003cbr\u003e\nSpark Plug Boot Material: Ceramic\u003cbr\u003e\nSpark Plug End Boot Color: White\u003cbr\u003e\nSpark Plug End Boot Degree: 135°\u003cbr\u003e\nSpark Plug End Boot Quantity (Straight): 8\u003cbr\u003e\nSpark Plug Wire Resistance: 500 Ohms\u003cbr\u003e\nUniversal Or Specific Fit: Universal\u003cbr\u003e\nWire 1 Length: 12 in.\u003cbr\u003e\nWire 2 Length: 12 in.\u003cbr\u003e\nWire 3 Length: 12 in.\u003cbr\u003e\nWire 4 Length: 12 in.\u003cbr\u003e\nWire 5 Length: 12 in.\u003cbr\u003e\nWire 6 Length: 12 in.\u003cbr\u003e\nWire 7 Length: 12 in.\u003cbr\u003e\nWire 8 Length: 12 in.\u003cbr\u003e\nWire Separators Included: Yes","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49998544470312,"sku":"81028CE","price":108.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81028ce_1600_ece27b1f-0cc4-46fb-b156-46eebf3a4bdc.jpg?v=1737763146"},{"product_id":"universal-gm-ls-8-5mm-ignition-wires-with-135-plug-boots-black","title":"Universal GM LS 8.5mm Ignition Wires with 135° Plug Boots - Black","description":"\u003cp\u003eFor ignition-system upgrades and replacement service, this wire set pairs 8.5 mm cable construction with application-specific boot geometry for clean fitment and dependable spark transfer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpark Delivery \u0026amp; Ignition Performance\u003c\/strong\u003e\u003cbr\u003eThe 8.5 mm outside diameter uses spiral wound core material with radio frequency interference noise suppression to help transfer spark energy while reducing electrical interference in compatible ignition systems. Resistance is listed at 500 Ohms, which should be matched to the ignition setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePremium High-Density Silicone Heat Protection\u003c\/strong\u003e\u003cbr\u003eThe black high-density silicone insulation and silicone plug boot material help provide heat resistance and long-term durability. Premium high-density silicone rated for up to 600°f supports routing near warm engine-bay components when installed with proper clearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBoot Configuration \u0026amp; Routing\u003c\/strong\u003e\u003cbr\u003eThe set uses 135° spark plug boot configuration with 135° coil\/distributor-end boot degree and Coil Pack terminal compatibility to support clean routing between the plugs and distributor or coil packs. Wire separators included: Yes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; System Matching\u003c\/strong\u003e\u003cbr\u003eFitment type is listed as Universal. Confirm spark plug terminal style, coil or distributor configuration, cylinder routing order, separator placement, and heat clearance before installation. LS and LT applications should be matched by engine family and coil location rather than engine-code wording.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003e'GM LS Series V8 applications\u003cbr\u003e• 4.8 L \/ 294 in3\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 5.7 L \/ 346 in3\u003cbr\u003e• 6.0 L \/ 364 in3\u003cbr\u003e• 6.2 L \/ 376 in3\u003cbr\u003e\u003cbr\u003e'14-'16 Chevrolet Small Block V8 Gen. V (LT-Based)\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 6.2 L \/ 376 in3\u003cbr\u003e\u003cbr\u003eNOTE: Fits small block generations 3,4, and 5 LS and LT applications.\u003cbr\u003e\u003cbr\u003eCOMMON VEHICLE APPLICATIONS:\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Corvette\u003cbr\u003eChevrolet Tahoe\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nBoot Type: 135°\u003cbr\u003e\nCoil End Boot Color: Black\u003cbr\u003e\nCore Material: Spiral Wound\u003cbr\u003e\nDistributor Coil End Boot Degree: 135°\u003cbr\u003e\nDistributor Coil End Terminal Type: Coil Pack\u003cbr\u003e\nInsulation Color: Black\u003cbr\u003e\nInsulation Material: High-density Silicone\u003cbr\u003e\nNoise Suppression Type: Radio Frequency Interference\u003cbr\u003e\nOutside Diameter: 8.5 mm\u003cbr\u003e\nQuantity: Full Set of 8 Plug Wires\u003cbr\u003e\nResistance: 500 Ohms\u003cbr\u003e\nSpark Plug Boot Material: Silicone\u003cbr\u003e\nSpark Plug End Boot Color: Black\u003cbr\u003e\nSpark Plug End Boot Degree: 135°\u003cbr\u003e\nSpark Plug End Boot Quantity (Straight): 8\u003cbr\u003e\nSpark Plug Wire Resistance: 500 Ohms\u003cbr\u003e\nUniversal Or Specific Fit: Universal\u003cbr\u003e\nWire 1 Length: 9.750 in.\u003cbr\u003e\nWire 2 Length: 9.750 in.\u003cbr\u003e\nWire 3 Length: 9.750 in.\u003cbr\u003e\nWire 4 Length: 9.750 in.\u003cbr\u003e\nWire 5 Length: 9.750 in.\u003cbr\u003e\nWire 6 Length: 9.750 in.\u003cbr\u003e\nWire 7 Length: 9.750 in.\u003cbr\u003e\nWire 8 Length: 9.750 in.\u003cbr\u003e\nWire Separators Included: Yes","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49998546993448,"sku":"81028","price":35.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81028_1600.jpg?v=1732640052"},{"product_id":"gm-05-18-ls-high-performance-ignition-coil-single-black","title":"GM '05-'18 LS High Performance Ignition Coil - Single - Black","description":"\u003cp\u003eWake up the ignition system with an ignition coil built to deliver stronger spark energy and cleaner engine response.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpark Energy\u003c\/strong\u003e\u003cbr\u003eHigh-output spark energy helps improve ignition consistency during startup, idle, and acceleration.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIgnition Coil Construction\u003c\/strong\u003e\u003cbr\u003ePerformance-style construction helps manage heat while maintaining dependable ignition performance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003e0.5 Ohms primary resistance helps match ignition system requirements. Verify mounting style and ignition compatibility before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS-BASED)\u003cbr\u003e• 4.8 L \/ 293 in3 (LR4, LY2, L20)\u003cbr\u003e• 5.3 L \/ 325 in3 (LM7, L59, LM4, L33, LC9, LH6, LH8, LH9, LMF, LMG, LY5, LS4)\u003cbr\u003e• 5.7 L \/ 346 in3 (LS1, LS6)\u003cbr\u003e• 6.0 L \/ 364 in3 (LQ4, LQ9, LS2, L76, LY6, L96, LFA, LZ1)\u003cbr\u003e• 6.2 L \/ 376 in3 (LS3, L92, L94, L9H, L99, LSA, LS9)\u003cbr\u003e• 7.0 L \/ 427 in3 (LS7)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eChevrolet Corvette LS2 \/ LS3 \/ LS7 \/ LS9 applications\u003cbr\u003eChevrolet Camaro LS3 \/ L99 applications\u003cbr\u003ePontiac G8 \/ GTO and CTS-V LS-based applications\u003cbr\u003eLS swap builds using matching coil connector and bracket style\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eVerify coil connector style, coil bracket style, and wiring harness compatibility before installation.\u003cbr\u003e8 coils are required for V8 applications when replacing a full set.\u003cbr\u003eFor LS swap use, match the coil connector and bracket style to the harness and valve cover setup.\u003cbr\u003e\u003cbr\u003e\u003cstrong data-start=\"0\" data-end=\"19\" data-is-only-node=\"\"\u003eSPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003eCoil Style: Coil Pack\u003cbr\u003eInternal Construction: Epoxy\u003cbr\u003ePrimary Resistance: 0.5 Ohms\u003cbr\u003eSecondary Resistance: 2,000 Ohms\u003cbr\u003eMaximum Voltage: 40,000 V\u003cbr\u003eSpark Duration: 300 Ms\u003cbr\u003ePeak Current: 220 Ma\u003cbr\u003eTurns Ratio: 75:1\u003cbr\u003eInductance: 2.7 Mh\u003cbr\u003eCoil Wire Attachment: Female\u003cbr\u003e\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":50008557060392,"sku":"81015BK","price":54.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81015bk_001.jpg?v=1735932174"},{"product_id":"gm-05-18-ls-high-performance-ignition-coil-set-of-8-black","title":"GM '05-'18 LS High Performance Ignition Coil - Set of 8 - Black","description":"\u003cp\u003eGive the ignition system a fresh spark source with a performance ignition coil designed for dependable voltage output.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpark Energy\u003c\/strong\u003e\u003cbr\u003eHigh-output spark energy helps improve ignition consistency during startup, idle, and acceleration.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIgnition Coil Construction\u003c\/strong\u003e\u003cbr\u003ePerformance-style construction helps manage heat while maintaining dependable ignition performance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003e0.5 Ohms primary resistance helps match ignition system requirements. Blade terminals support ignition wire connection. Verify mounting style and ignition compatibility before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS-BASED)\u003cbr\u003e• 4.8 L \/ 293 in3 (LR4, LY2, L20)\u003cbr\u003e• 5.3 L \/ 325 in3 (LM7, L59, LM4, L33, LC9, LH6, LH8, LH9, LMF, LMG, LY5, LS4)\u003cbr\u003e• 5.7 L \/ 346 in3 (LS1, LS6)\u003cbr\u003e• 6.0 L \/ 364 in3 (LQ4, LQ9, LS2, L76, LY6, L96, LFA, LZ1)\u003cbr\u003e• 6.2 L \/ 376 in3 (LS3, L92, L94, L9H, L99, LSA, LS9)\u003cbr\u003e• 7.0 L \/ 427 in3 (LS7)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eChevrolet Corvette LS2 \/ LS3 \/ LS7 \/ LS9 applications\u003cbr\u003eChevrolet Camaro LS3 \/ L99 applications\u003cbr\u003ePontiac G8 \/ GTO and Cadillac CTS-V LS-based applications\u003cbr\u003eLS swap builds using matching coil connector and bracket style\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eVerify coil connector style, coil bracket style, and wiring harness compatibility before installation.\u003cbr\u003e8 coils are required for V8 applications when replacing a full set.\u003cbr\u003eFor LS swap use, match the coil connector and bracket style to the harness and valve cover setup.\u003cbr\u003e\u003cbr\u003e\u003cstrong data-start=\"0\" data-end=\"19\" data-is-only-node=\"\"\u003eSPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003eCoil Shape: Square\u003cbr\u003eCoil Type: Coil Pack\u003cbr\u003eCoil Wire Included: No\u003cbr\u003eColor: Black\u003cbr\u003eConnector Gender: Female\u003cbr\u003eGrade Type: Performance\u003cbr\u003eIgnition Type: Electronic\u003cbr\u003eInductance: 2.7 mH\u003cbr\u003eInternal Construction: Epoxy\u003cbr\u003eMount Type: Bolt on\u003cbr\u003eMounting Bracket Included: No\u003cbr\u003eMounting Hardware Included: No\u003cbr\u003eMounting Hole Quantity: 2\u003cbr\u003eOil Filled: No\u003cbr\u003ePeak Current: 220 mA\u003cbr\u003ePrimary Resistance: 0.5 Ohms\u003cbr\u003eQuantity: Set of 8\u003cbr\u003eRequires External Resistor: No\u003cbr\u003eSecondary Resistance: 2,000 Ohms\u003cbr\u003eSpark Duration: 300 ms\u003cbr\u003eTerminal Gender: Female\u003cbr\u003eTerminal Quantity: 2\u003cbr\u003eTerminal Type: Blade\u003cbr\u003eTurns Ratio: 75:1\u003cbr\u003eVoltage: 40,000 V\u003cbr\u003e\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":50008558141736,"sku":"81015-8BK","price":391.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81015-8bk_002_dd2d0034-3915-457d-9209-0e8b4762dd5d.jpg?v=1735932392"},{"product_id":"gm-05-18-ls-high-performance-ignition-coil-set-of-8-red","title":"GM '05-'18 LS High Performance Ignition Coil - Set of 8 - Red","description":"\u003cp\u003eReplace a tired factory-style ignition coil with a performance-focused upgrade that helps improve spark consistency.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpark Energy\u003c\/strong\u003e\u003cbr\u003eHigh-output spark energy helps improve ignition consistency during startup, idle, and acceleration.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIgnition Coil Construction\u003c\/strong\u003e\u003cbr\u003ePerformance-style construction helps manage heat while maintaining dependable ignition performance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003e0.5 Ohms primary resistance helps match ignition system requirements. Blade terminals support ignition wire connection. Verify mounting style and ignition compatibility before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS-BASED)\u003cbr\u003e• 4.8 L \/ 293 in3 (LR4, LY2, L20)\u003cbr\u003e• 5.3 L \/ 325 in3 (LM7, L59, LM4, L33, LC9, LH6, LH8, LH9, LMF, LMG, LY5, LS4)\u003cbr\u003e• 5.7 L \/ 346 in3 (LS1, LS6)\u003cbr\u003e• 6.0 L \/ 364 in3 (LQ4, LQ9, LS2, L76, LY6, L96, LFA, LZ1)\u003cbr\u003e• 6.2 L \/ 376 in3 (LS3, L92, L94, L9H, L99, LSA, LS9)\u003cbr\u003e• 7.0 L \/ 427 in3 (LS7)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eChevrolet Corvette LS2 \/ LS3 \/ LS7 \/ LS9 applications\u003cbr\u003eChevrolet Camaro LS3 \/ L99 applications\u003cbr\u003ePontiac G8 \/ GTO and Cadillac CTS-V LS-based applications\u003cbr\u003eLS swap builds using matching coil connector and bracket style\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eVerify coil connector style, coil bracket style, and wiring harness compatibility before installation.\u003cbr\u003e8 coils are required for V8 applications when replacing a full set.\u003cbr\u003eFor LS swap use, match the coil connector and bracket style to the harness and valve cover setup.\u003cbr\u003e\u003cbr\u003e\u003cstrong data-start=\"0\" data-end=\"19\" data-is-only-node=\"\"\u003eSPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003eCoil Shape: Square\u003cbr\u003eCoil Type: Coil Pack\u003cbr\u003eCoil Wire Included: No\u003cbr\u003eColor: Red\u003cbr\u003eConnector Gender: Female\u003cbr\u003eGrade Type: Performance\u003cbr\u003eIgnition Type: Electronic\u003cbr\u003eInductance: 2.7 mH\u003cbr\u003eInternal Construction: Epoxy\u003cbr\u003eMount Type: Bolt on\u003cbr\u003eMounting Bracket Included: No\u003cbr\u003eMounting Hardware Included: No\u003cbr\u003eMounting Hole Quantity: 2\u003cbr\u003eOil Filled: No\u003cbr\u003ePeak Current: 220 mA\u003cbr\u003ePrimary Resistance: 0.5 Ohms\u003cbr\u003eQuantity: Set of 8\u003cbr\u003eRequires External Resistor: No\u003cbr\u003eSecondary Resistance: 2,000 Ohms\u003cbr\u003eSpark Duration: 300 ms\u003cbr\u003eTerminal Gender: Female\u003cbr\u003eTerminal Quantity: 2\u003cbr\u003eTerminal Type: Blade\u003cbr\u003eTurns Ratio: 75:1\u003cbr\u003eVoltage: 40,000 V\u003cbr\u003e\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":50008559026472,"sku":"81015-8","price":391.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81015-8-1-1600_1_61c8723c-065e-481c-91ba-e6e628d02417.jpg?v=1735932277"},{"product_id":"gm-99-07-ls-truck-style-high-performance-ignition-coil-single-black","title":"GM '99-'07 LS Truck Style High Performance Ignition Coil - Single - Black","description":"Add a cleaner, more dependable ignition signal with an ignition coil built around stronger spark output and reliable operation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpark Energy\u003c\/strong\u003e\u003cbr\u003eHigh-output spark energy helps improve ignition consistency during startup, idle, and acceleration.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIgnition Coil Construction\u003c\/strong\u003e\u003cbr\u003ePerformance-style construction helps manage heat while maintaining dependable ignition performance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003e0.5 primary resistance helps match ignition system requirements. Verify mounting style and ignition compatibility before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS-BASED TRUCK)\u003cbr\u003e• 4.8 L \/ 293 in3 (LR4)\u003cbr\u003e• 5.3 L \/ 325 in3 (LM7, L59, LM4, L33)\u003cbr\u003e• 6.0 L \/ 364 in3 (LQ4, LQ9)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eChevrolet Silverado \/ GMC Sierra 1999-2007 Classic LS-based trucks\u003cbr\u003eChevrolet Tahoe \/ Suburban and GMC Yukon LS-based SUVs\u003cbr\u003eChevrolet Express \/ GMC Savana LS-based vans\u003cbr\u003eTruck LS swap builds using early truck-style coil packs\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eVerify early truck-style coil connector, bracket style, and harness compatibility before installation.\u003cbr\u003e8 coils are required for V8 applications when replacing a full set.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eCoil Style: Coil Pack\u003cbr\u003eInternal Construction: Epoxy\u003cbr\u003ePrimary Resistance: 0.5\u003cbr\u003eSecondary Resistance: 2000\u003cbr\u003eMaximum Voltage: 40000 V\u003cbr\u003eSpark Duration: 300 Ms\u003cbr\u003ePeak Current: 220 mA\u003cbr\u003eTurns Ratio: 75:1\u003cbr\u003eInductance: 2.7 mH\u003cbr\u003eCoil Wire Attachment: Female\u003cbr\u003eQuantity: 1\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":50008561320232,"sku":"81016BK","price":54.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81016bk_001.jpg?v=1736983860"},{"product_id":"gm-99-07-ls-truck-style-high-performance-ignition-coil-set-of-8-black","title":"GM '99-'07 LS Truck Style High Performance Ignition Coil - Set of 8 - Black","description":"Refresh the ignition system with a coil designed to support quicker starts, smoother idle quality, and cleaner spark delivery.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpark Energy\u003c\/strong\u003e\u003cbr\u003eHigh-output spark energy helps improve ignition consistency during startup, idle, and acceleration.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIgnition Coil Construction\u003c\/strong\u003e\u003cbr\u003ePerformance-style construction helps manage heat while maintaining dependable ignition performance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003e0.5 Ohms primary resistance helps match ignition system requirements. Blade terminals support ignition wire connection. Verify mounting style and ignition compatibility before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS-BASED TRUCK)\u003cbr\u003e• 4.8 L \/ 293 in3 (LR4)\u003cbr\u003e• 5.3 L \/ 325 in3 (LM7, L59, LM4, L33)\u003cbr\u003e• 6.0 L \/ 364 in3 (LQ4, LQ9)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eChevrolet Silverado \/ GMC Sierra 1999-2007 Classic LS-based trucks\u003cbr\u003eChevrolet Tahoe \/ Suburban and GMC Yukon LS-based SUVs\u003cbr\u003eChevrolet Express \/ GMC Savana LS-based vans\u003cbr\u003eTruck LS swap builds using early truck-style coil packs\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eVerify early truck-style coil connector, bracket style, and harness compatibility before installation.\u003cbr\u003e8 coils are required for V8 applications when replacing a full set.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eCoil Shape: Square\u003cbr\u003eCoil Type: Coil Pack\u003cbr\u003eCoil Wire Included: No\u003cbr\u003eColor: Black\u003cbr\u003eConnector Gender: Female\u003cbr\u003eGrade Type: Performance\u003cbr\u003eIgnition Type: Electronic\u003cbr\u003eInductance: 2.7 mH\u003cbr\u003eInternal Construction: Epoxy\u003cbr\u003eMount Type: Bolt on\u003cbr\u003eMounting Bracket Included: Yes\u003cbr\u003eMounting Hardware Included: No\u003cbr\u003eMounting Hole Quantity: 2\u003cbr\u003eOil Filled: No\u003cbr\u003ePeak Current: 220 mA\u003cbr\u003ePrimary Resistance: 0.5 Ohms\u003cbr\u003eQuantity: Set of 8\u003cbr\u003eRequires External Resistor: No\u003cbr\u003eSecondary Resistance: 2,000 Ohms\u003cbr\u003eSpark Duration: 300 ms\u003cbr\u003eTerminal Gender: Female\u003cbr\u003eTerminal Quantity: 2\u003cbr\u003eTerminal Type: Blade\u003cbr\u003eTurns Ratio: 75:1\u003cbr\u003eVoltage: 40,000 V\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":50008561975592,"sku":"81016-8BK","price":391.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81016-8bk_001_fd6c27d2-d743-4a79-a216-334722b56df5.jpg?v=1736983815"},{"product_id":"gm-99-07-ls-truck-style-high-performance-ignition-coil-single-red","title":"GM '99-'07 LS Truck Style High Performance Ignition Coil - Single - Red","description":"Bring new life to a distributor-based ignition system with a high-output coil made for stronger spark performance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpark Energy\u003c\/strong\u003e\u003cbr\u003eHigh-output spark energy helps improve ignition consistency during startup, idle, and acceleration.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIgnition Coil Construction\u003c\/strong\u003e\u003cbr\u003ePerformance-style construction helps manage heat while maintaining dependable ignition performance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003e0.5 Ohms primary resistance helps match ignition system requirements. Blade terminals support ignition wire connection. Verify mounting style and ignition compatibility before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS-BASED TRUCK)\u003cbr\u003e• 4.8 L \/ 293 in3 (LR4)\u003cbr\u003e• 5.3 L \/ 325 in3 (LM7, L59, LM4, L33)\u003cbr\u003e• 6.0 L \/ 364 in3 (LQ4, LQ9)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eChevrolet Silverado \/ GMC Sierra 1999-2007 Classic LS-based trucks\u003cbr\u003eChevrolet Tahoe \/ Suburban and GMC Yukon LS-based SUVs\u003cbr\u003eChevrolet Express \/ GMC Savana LS-based vans\u003cbr\u003eTruck LS swap builds using early truck-style coil packs\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eVerify early truck-style coil connector, bracket style, and harness compatibility before installation.\u003cbr\u003e8 coils are required for V8 applications when replacing a full set.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eCoil Shape: Square\u003cbr\u003eCoil Type: Coil Pack\u003cbr\u003eCoil Wire Included: No\u003cbr\u003eColor: Red\u003cbr\u003eConnector Gender: Female\u003cbr\u003eGrade Type: Performance\u003cbr\u003eIgnition Type: Electronic\u003cbr\u003eInductance: 2.7 mH\u003cbr\u003eInternal Construction: Epoxy\u003cbr\u003eMount Type: Bolt on\u003cbr\u003eMounting Bracket Included: Yes\u003cbr\u003eMounting Hardware Included: No\u003cbr\u003eMounting Hole Quantity: 2\u003cbr\u003eOil Filled: No\u003cbr\u003ePeak Current: 220 mA\u003cbr\u003ePrimary Resistance: 0.5 Ohms\u003cbr\u003eQuantity: 1\u003cbr\u003eRequires External Resistor: No\u003cbr\u003eSecondary Resistance: 2,000 Ohms\u003cbr\u003eSpark Duration: 300 ms\u003cbr\u003eTerminal Gender: Female\u003cbr\u003eTerminal Quantity: 2\u003cbr\u003eTerminal Type: Blade\u003cbr\u003eTurns Ratio: 75:1\u003cbr\u003eVoltage: 40,000 V\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":50008562598184,"sku":"81016","price":54.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81016-1-600.jpg?v=1732636841"},{"product_id":"gm-ls2-ls3-ls7-ls9-billet-aluminum-ignition-coil-brackets-black","title":"GM LS2\/LS3\/LS7\/LS9 Billet Aluminum Ignition Coil Brackets - Black","description":"\u003cp\u003eThis GM LS2\/LS3\/LS7\/LS9 Billet Aluminum Ignition Coil Brackets - Black is designed for GM LS engine and accessory drive applications that need a clean, rigid ignition coil mounting solution. It helps position the component correctly while improving the finished look and serviceability of the engine bay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication-Specific Mounting\u003c\/strong\u003e\u003cbr\u003e\nThe bracket configuration is built around the listed platform and component layout, helping align the ignition coil with the correct belt, cable, or mounting path.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDurable Bracket Construction\u003c\/strong\u003e\u003cbr\u003e\nManufactured from billet aluminum, this bracket is designed to handle normal engine vibration, accessory load, and repeated service use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClean Engine Bay Finish\u003c\/strong\u003e\u003cbr\u003e\nThe finished appearance gives the installation a cleaner, more complete look for street, show, and performance builds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003e\n\u003cstrong\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS BASED)\u003c\/strong\u003e\u003cbr\u003e\n• 4.8 L \/ 293 in3 (LR4, LY2, L20)\u003cbr\u003e\n• 5.3 L \/ 325 in3 (LM7, L59, LM4, L33, LC9, LH6, LY5, LMG)\u003cbr\u003e\n• 6.0 L \/ 364 in3 (LQ4, LQ9, LS2, LY6, L76, L96)\u003cbr\u003e\n• 6.2 L \/ 376 in3 (LS3, L92, L99, LS9)\u003cbr\u003e\n• 7.0 L \/ 427 in3 (LS7)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE Direct replacement for most LS2, LS3, LS7, and LS9 car application brackets.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChevrolet Silverado 1500 \/ 2500 \/ 3500\u003c\/li\u003e\n\u003cli\u003eGMC Sierra 1500 \/ 2500 \/ 3500\u003c\/li\u003e\n\u003cli\u003eChevrolet Tahoe \/ Suburban\u003c\/li\u003e\n\u003cli\u003eGMC Yukon \/ Yukon XL\u003c\/li\u003e\n\u003cli\u003eChevrolet Camaro \/ Corvette (LS equipped)\u003c\/li\u003e\n\u003cli\u003ePontiac GTO \/ G8 (LS equipped)\u003c\/li\u003e\n\u003c\/ul\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\nCoil Type: Coil Pack\u003cbr\u003e\nCoil Style: Delco D510C \/ TSP 81015\u003cbr\u003e\nBracket Material: Billet Aluminum\u003cbr\u003e\nQuantity: 2\u003cbr\u003e\nIncluded: Mounting Hardware\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":50009046712616,"sku":"81022BK","price":71.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81022bk-1600_1.jpg?v=1736982398"},{"product_id":"gm-05-18-ls-high-performance-ignition-coils-with-stock-style-brackets-black","title":"GM '05-'18 LS High Performance Ignition Coils with Stock Style Brackets - Black","description":"\u003cp\u003eWake up the ignition system with an ignition coil built to deliver stronger spark energy and cleaner engine response.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpark Energy\u003c\/strong\u003e\u003cbr\u003eHigh-output spark energy helps improve ignition consistency during startup, idle, and acceleration.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIgnition Coil Construction\u003c\/strong\u003e\u003cbr\u003ePerformance-style construction helps manage heat while maintaining dependable ignition performance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003e0.500 Ohms primary resistance helps match ignition system requirements. Verify mounting style and ignition compatibility before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS-BASED)\u003cbr\u003e• 4.8 L \/ 293 in3 (LR4, LY2, L20)\u003cbr\u003e• 5.3 L \/ 325 in3 (LM7, L59, LM4, L33, LC9, LH6, LH8, LH9, LMF, LMG, LY5, LS4)\u003cbr\u003e• 5.7 L \/ 346 in3 (LS1, LS6)\u003cbr\u003e• 6.0 L \/ 364 in3 (LQ4, LQ9, LS2, L76, LY6, L96, LFA, LZ1)\u003cbr\u003e• 6.2 L \/ 376 in3 (LS3, L92, L94, L9H, L99, LSA, LS9)\u003cbr\u003e• 7.0 L \/ 427 in3 (LS7)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eChevrolet Corvette LS2 \/ LS3 \/ LS7 \/ LS9 applications\u003cbr\u003eChevrolet Camaro LS3 \/ L99 applications\u003cbr\u003ePontiac G8 \/ GTO and Cadillac CTS-V LS-based applications\u003cbr\u003eLS swap builds using matching coil connector and bracket style\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eVerify coil connector style, coil bracket style, and wiring harness compatibility before installation.\u003cbr\u003e8 coils are required for V8 applications when replacing a full set.\u003cbr\u003eFor LS swap use, match the coil connector and bracket style to the harness and valve cover setup.\u003cbr\u003e\u003cbr\u003e\u003cstrong data-start=\"0\" data-end=\"19\" data-is-only-node=\"\"\u003eSPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003eBracket Material: Billet Aluminum\u003cbr\u003eCoil Style: Coil Pack\u003cbr\u003eInternal Construction: Epoxy\u003cbr\u003ePrimary Resistance: 0.500 Ohms\u003cbr\u003eSecondary Resistance: 2,000 Ohms\u003cbr\u003eMaximum Voltage: 40,000 Volts (V)\u003cbr\u003eSpark Duration: 300 Microseconds (µs)\u003cbr\u003ePeak Current: 220 Milliamperes (Ma)\u003cbr\u003eTurns Ratio: 75:1\u003cbr\u003eInductance: 2.7 Millihenrys (Mh)\u003cbr\u003eCoil Wire Attachment: Female\u003cbr\u003e\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":50009048416552,"sku":"81022BKKT","price":475.56,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81022bkkt-1600_1.jpg?v=1732639998"},{"product_id":"gm-ls-ignition-coil-relocation-brackets-black","title":"GM LS Ignition Coil Relocation Brackets - Black","description":"\u003cp\u003eThis GM LS Ignition Coil Relocation Brackets - Black is designed for GM LS engine and accessory drive applications that need a clean, rigid ignition coil mounting solution. It helps position the component correctly while improving the finished look and serviceability of the engine bay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication-Specific Mounting\u003c\/strong\u003e\u003cbr\u003e\nThe bracket configuration is built around the listed platform and component layout, helping align the ignition coil with the correct belt, cable, or mounting path.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDurable Bracket Construction\u003c\/strong\u003e\u003cbr\u003e\nManufactured from aluminum, this bracket is designed to handle normal engine vibration, accessory load, and repeated service use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClean Engine Bay Finish\u003c\/strong\u003e\u003cbr\u003e\nThe finished appearance gives the installation a cleaner, more complete look for street, show, and performance builds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003e\n\u003cstrong\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS BASED)\u003c\/strong\u003e\u003cbr\u003e\n• 4.8 L \/ 293 in3 (LR4, LY2, L20)\u003cbr\u003e\n• 5.3 L \/ 325 in3 (LM7, L59, LM4, L33, LC9, LH6, LY5, LMG)\u003cbr\u003e\n• 6.0 L \/ 364 in3 (LQ4, LQ9, LS2, LY6, L76, L96)\u003cbr\u003e\n• 6.2 L \/ 376 in3 (LS3, L92, L99, LS9)\u003cbr\u003e\n• 7.0 L \/ 427 in3 (LS7)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChevrolet Silverado 1500 \/ 2500 \/ 3500\u003c\/li\u003e\n\u003cli\u003eGMC Sierra 1500 \/ 2500 \/ 3500\u003c\/li\u003e\n\u003cli\u003eChevrolet Tahoe \/ Suburban\u003c\/li\u003e\n\u003cli\u003eGMC Yukon \/ Yukon XL\u003c\/li\u003e\n\u003cli\u003eChevrolet Camaro \/ Corvette (LS equipped)\u003c\/li\u003e\n\u003cli\u003ePontiac GTO \/ G8 (LS equipped)\u003c\/li\u003e\n\u003c\/ul\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\nCoil Style: Delco #D510C\/ #81015 Or Delco #D585\/ #81016\u003cbr\u003e\nBracket Material: Aluminum\u003cbr\u003e\nQuantity: 2\u003cbr\u003e\nIncluded: Spacers\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":50009058902312,"sku":"81020BK","price":25.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81020-1600.jpg?v=1732636858"},{"product_id":"gm-ls-v8-1-9-hp-mini-starter-chrome","title":"GM LS V8 1.9 HP Mini Starter - Chrome","description":"\u003cp\u003e\u003cspan\u003eUpgrade your LS swap or LS-powered vehicle with a compact high-torque mini starter engineered for GM Gen III and Gen IV LS-based V8 applications. Featuring a 1.9 horsepower motor and 4.0:1 gear reduction ratio, this starter delivers dependable cranking performance for street, performance, and custom engine swap builds.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCompatible with many 4.8L, 5.3L, 5.7L, and 6.0L LS engine combinations, including popular LR4, LM4, LM7, L33, L59, LS1, LS6, LQ4, and LQ9 applications, this starter is designed to provide reliable starting power while maintaining a compact footprint. The gear reduction design helps increase torque output for dependable hot and cold starts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe compact Nippondenso-style housing provides additional clearance around headers, oil pans, steering components, and chassis modifications commonly encountered in LS swap projects. An adjustable billet aluminum mounting block allows easier starter positioning and installation flexibility across a wide range of LS-powered vehicles, muscle cars, trucks, street rods, and custom builds.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRated for engine combinations up to approximately 12.0:1 compression ratio, this starter is engineered to deliver reliable cranking power for demanding street and performance applications. The chrome finish adds a polished appearance while maintaining the durability needed for long-term use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhether you're replacing a factory LS starter, upgrading a performance build, or completing an LS engine swap, this high-torque mini starter delivers the power, clearance, and reliability needed for dependable engine starts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompact Mini Starter Design\u003c\/strong\u003e\u003cbr\u003eThe Nippondenso-style housing helps create additional clearance around headers, oil pans, steering linkage, and chassis components commonly encountered in LS swap projects. Its compact footprint makes it a popular upgrade for LS-powered muscle cars, trucks, street rods, and custom builds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Torque Starting Performance\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe 1.9 HP motor and 4.0:1 gear reduction ratio work together to provide strong cranking performance for GM LS-based engine combinations. Gear reduction technology helps improve starter efficiency while maintaining a lightweight compact package.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS-BASED)\u003cbr\u003e• 4.8 L \/ 294 in3\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 5.7 L \/ 346 in3 commonly referred to as 350 in3\u003cbr\u003e• 6.0 L \/ 364 in3\u003cbr\u003e\u003cbr\u003eNOTE: Fits 168-tooth flywheels\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eChevrolet Chevelle \/ Nova \/ Camaro\u003cbr\u003eChevrolet C10 \/ K10 Trucks\u003cbr\u003eChevrolet Impala \/ El Camino\u003cbr\u003eStreet rod, muscle car, and custom Chevy builds\u003cbr\u003e\u003cbr\u003eNOTES\u003cbr\u003eFits 168-tooth flywheel applications\u003cbr\u003eAdjustable billet aluminum mounting block included\u003cbr\u003eStandard rotation design\u003cbr\u003eDesigned for GM Gen III and Gen IV LS-based engine platforms\u003cbr\u003eVerify flywheel tooth count, oil pan, header, and flexplate clearance before installation\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003eStarter Style: Mini\u003cbr\u003eStarter Type: Compact\u003cbr\u003eColor: Chrome\u003cbr\u003eAdjustable Mounting Block: Yes\u003cbr\u003eStarter Rotation: Standard\u003cbr\u003eMaximum Compression Ratio: 12.0:1\u003cbr\u003eGear Reduction Ratio: 4.0:1\u003cbr\u003eHorsepower: 1.9\u003cbr\u003eStarter Housing Material: Cast Aluminum\u003cbr\u003eMounting Block Material: Billet Aluminum\u003cbr\u003e\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":51297332560168,"sku":"JM7009C","price":258.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/JM7009C_01_2df9028d-13fa-4e79-9a4b-024083017d70.jpg?v=1766619276"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/collections\/es1025c-1-1600.jpg?v=1756850577","url":"https:\/\/www.topstreetperformance.com\/collections\/ls-lt-ignition-and-power.oembed?page=2","provider":"Top Street Performance","version":"1.0","type":"link"}