{"title":"LS\/LT Air and Fuel Delivery","description":"\u003cp\u003eShop high-performance LS and LT air and fuel delivery components designed to improve airflow, fuel efficiency, and overall engine performance. From intake manifolds and throttle bodies to fuel injection systems and supporting components, these parts help ensure optimal air and fuel mixture for maximum power. Ideal for LS and LT engine swaps, street builds, and high-performance applications.\u003c\/p\u003e\n\u003c!--split--\u003e\n\u003cp\u003eThe air and fuel delivery system is a critical part of any LS or LT engine, responsible for supplying the precise mixture of air and fuel needed for efficient combustion. Proper airflow and fuel delivery directly impact horsepower, throttle response, and overall engine efficiency.\u003c\/p\u003e\n\u003cp\u003eLS engines typically use multi-port fuel injection systems, while LT engines incorporate advanced direct injection technology, allowing for improved fuel atomization and increased efficiency. These systems deliver fuel more precisely, helping modern engines produce more power while maintaining better fuel economy.\u003c\/p\u003e\n\u003cp\u003eKey components in LS and LT air and fuel delivery systems include intake manifolds, throttle bodies, fuel injectors, fuel pumps, fuel rails, and fuel pressure regulators. These components work together to maintain proper airflow and consistent fuel pressure, ensuring the engine receives the correct air-fuel ratio under all operating conditions.\u003c\/p\u003e\n\u003cp\u003eUpgrading air and fuel delivery components can significantly improve engine performance. High-performance intake manifolds are designed to increase airflow and reduce restrictions, allowing engines to produce more horsepower and torque. Optimized fuel systems ensure consistent fuel delivery, especially in high-performance or forced induction applications where demand is increased.\u003c\/p\u003e\n\u003cp\u003eIn LS swap applications, properly designed air and fuel systems are essential for reliable operation and performance. Builders often upgrade to high-flow fuel pumps, performance injectors, and aftermarket intake systems to support increased power levels and ensure compatibility with custom setups.\u003c\/p\u003e\n\u003cp\u003eLS and LT air and fuel delivery components are especially important in performance builds where efficiency and power output are critical. Whether you're upgrading a stock engine or building a high-horsepower setup, choosing the right components helps ensure optimal combustion, improved performance, and long-term reliability.\u003c\/p\u003e\n\u003ch3\u003eShop Related LS \u0026amp; LT Components\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/gm-ls-lt-intake-manifolds\"\u003eLS \/ LT Intake Manifolds\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/ls-lt-ignition-and-power\"\u003eLS \/ LT Ignition \u0026amp; Power\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/ls-lt-electrical-wiring\"\u003eLS \/ LT Electrical Wiring\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/ls-lt-engine-components\"\u003eLS \/ LT Engine Components\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/ls-lt-front-drive-systems\"\u003eLS \/ LT Front Drive Systems\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"105mm-4-bolt-ls-throttle-cable-bracket-natural","title":"105mm 4-Bolt LS Throttle Cable Bracket - Natural","description":"\u003cp\u003eBuilt for universal throttle linkage setups, this throttle cable supports adjustable pedal-to-throttle connection routing in properly matched EFI or carbureted applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCable Length \u0026amp; Travel\u003c\/strong\u003e\u003cbr\u003eThe cable should be routed to maintain smooth travel and full throttle return.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eJacket \/ End Fitting Details\u003c\/strong\u003e\u003cbr\u003eConfirm bracket compatibility and linkage geometry before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRouting \u0026amp; Linkage Setup\u003c\/strong\u003e\u003cbr\u003eVerify firewall routing, pedal travel, return spring setup, and throttle lever position before final adjustment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; Adjustment\u003c\/strong\u003e\u003cbr\u003eCommon use cases include custom EFI builds, restoration projects, and street performance applications requiring a properly routed throttle cable.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003e4-BOLT LSX TSP DRIVE-BY-CABLE THROTTLE BODIES\u003cbr\u003e• 81012\u003cbr\u003e• 81042\u003cbr\u003e\u003cbr\u003e4-BOLT LSX TSP FABRICATED INTAKE MANIFOLDS\u003cbr\u003e• 81001\u003cbr\u003e• 81002\u003cbr\u003e• 81003\u003cbr\u003e• 81007\u003cbr\u003e• 81043\u003cbr\u003e• 81044\u003cbr\u003e\u003cbr\u003eNOTE: Due to 105mm opening, this will fit any combination of 92mm or 102mm TSP drive-by-cable LSX throttle bodies and fabricated LSX intake manifolds.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Corvette\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nColor: Black\u003cbr\u003e\nColor: Black\u003cbr\u003e\nGasket Included: Yes\u003cbr\u003e\nMaterial: Steel\u003cbr\u003e\nMounting Hardware Included: Yes\u003cbr\u003e\nMounting Hole Quantity: 4\u003cbr\u003e\nThrottle Body Bolt Pattern: OEM 4-Bolt Pattern\u003cbr\u003e\nThrottle Opening: 105 mm\u003cbr\u003e\nUniversal Or Specific Fit: Specific","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49760230801704,"sku":"81013SL","price":38.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81013sl.jpg?v=1736793730"},{"product_id":"velocity-ls1-ls2-ls6-billet-aluminum-high-performance-fuel-rail-kit-clear-anodized","title":"Velocity LS1\/LS2\/LS6 Billet Aluminum High Performance Fuel Rail Kit - Clear Anodized","description":"\u003cp\u003eBuilt for GM LS1\/LS2\/LS6 applications, this fuel rail kit supports consistent injector fuel supply, clean rail routing, and dependable multi-port EFI operation in properly matched intake combinations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFuel Rail Delivery \u0026amp; Distribution\u003c\/strong\u003e\u003cbr\u003eThe custom design fuel rail layout uses -8AN connection details with crossover pipe included: Yes. It is designed to help maintain steady fuel distribution across the injector banks when paired with the correct pump, regulator, and line size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBillet Construction \u0026amp; Finish\u003c\/strong\u003e\u003cbr\u003eBillet Aluminum construction and included components listed as Fittings And Mounting Hardware support corrosion resistance, serviceability, and a clean installed appearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInjector \/ Manifold Matching\u003c\/strong\u003e\u003cbr\u003eInjection style is listed as Multi-Port. Confirm manifold compatibility, injector length, fuel line routing, and regulator layout before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; System Matching\u003c\/strong\u003e\u003cbr\u003eCommon use cases include Chevrolet Camaro, Pontiac Firebird, Chevrolet Corvette. Verify manifold family, injector height, fuel fittings, and rail clearance before final assembly.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eTSP VELOCITY INTAKES AND FUEL RAILS\u003cbr\u003e• 81001\u003cbr\u003e• 81002\u003cbr\u003e• 81043\u003cbr\u003e• 81044\u003cbr\u003e\u003cbr\u003eNOTE: Designed for use with TSP manifolds only and will not fit stock manifolds.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Tahoe\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nInjection Style: Multi-Port\u003cbr\u003e\nFuel Rail Type: Custom  Design\u003cbr\u003e\nFittings: -8AN\u003cbr\u003e\nCrossover Pipe Included: Yes\u003cbr\u003e\nFuel Rail Material: Billet Aluminum\u003cbr\u003e\nIncluded: Fittings And Mounting Hardware","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562039320872,"sku":"81008CA","price":176.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81008_81009_-velocity_1-1600.jpg?v=1732636784"},{"product_id":"velocity-ls3-l92-billet-aluminum-high-performance-fuel-rail-kit-clear-anodized","title":"Velocity LS3\/L92 Billet Aluminum High Performance Fuel Rail Kit - Clear Anodized","description":"\u003cp\u003eBuilt for GM LS3\/L92 rectangular-port applications, this fuel rail kit supports consistent injector fuel supply, clean rail routing, and dependable multi-port EFI operation in properly matched intake combinations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFuel Rail Delivery \u0026amp; Distribution\u003c\/strong\u003e\u003cbr\u003eThe custom design fuel rail layout uses -8An connection details with crossover pipe included: Yes. It is designed to help maintain steady fuel distribution across the injector banks when paired with the correct pump, regulator, and line size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBillet Construction \u0026amp; Finish\u003c\/strong\u003e\u003cbr\u003eBillet Aluminum construction and included components listed as Fittings And Mounting Hardware support corrosion resistance, serviceability, and a clean installed appearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInjector \/ Manifold Matching\u003c\/strong\u003e\u003cbr\u003eInjection style is listed as Multi-Port. Confirm manifold compatibility, injector length, fuel line routing, and regulator layout before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; System Matching\u003c\/strong\u003e\u003cbr\u003eCommon use cases include Chevrolet Camaro, Chevrolet Corvette, Chevrolet Silverado. Verify manifold family, injector height, fuel fittings, and rail clearance before final assembly.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003e\"RECTANGULAR\" PORT TSP FABRICATED INTAKE MANIFOLDS\u003cbr\u003e\u003cbr\u003eNOTE: Designed for use with TSP manifolds only and will not fit stock manifolds.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Tahoe\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nInjection Style: Multi-Port\u003cbr\u003e\nFuel Rail Type: Custom  Design\u003cbr\u003e\nFittings: -8An\u003cbr\u003e\nCrossover Pipe Included: Yes\u003cbr\u003e\nFuel Rail Material: Billet Aluminum\u003cbr\u003e\nIncluded: Fittings And Mounting Hardware","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562040205608,"sku":"81009CA","price":176.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81008_81009_-velocity_1-1600_1.jpg?v=1732636792"},{"product_id":"velocity-oem-style-billet-aluminum-high-performance-fuel-rail-kit-clear-anodized","title":"Velocity OEM Style Billet Aluminum High Performance Fuel Rail Kit - Clear Anodized","description":"\u003cp\u003eBuilt for compatible EFI fuel-system applications, this fuel rail kit supports consistent injector fuel supply, clean rail routing, and dependable multi-port EFI operation in properly matched intake combinations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFuel Rail Delivery \u0026amp; Distribution\u003c\/strong\u003e\u003cbr\u003eThe factory-style style fuel rail layout uses -8 AN connection details with crossover pipe included: Yes. It is designed to help maintain steady fuel distribution across the injector banks when paired with the correct pump, regulator, and line size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBillet Construction \u0026amp; Finish\u003c\/strong\u003e\u003cbr\u003eAluminum construction with a clear anodized finish support corrosion resistance, serviceability, and a clean installed appearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInjector \/ Manifold Matching\u003c\/strong\u003e\u003cbr\u003eInjection style is listed as Multi-port. Fuel rail brackets included: Yes. Confirm manifold compatibility, injector length, fuel line routing, and regulator layout before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; System Matching\u003c\/strong\u003e\u003cbr\u003eCommon use cases include street performance applications, restoration projects, custom EFI builds. Verify manifold family, injector height, fuel fittings, and rail clearance before final assembly.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS-BASED)\u003cbr\u003e• 4.8 L \/ 294 in3\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 5.7 L \/ 350 in3\u003cbr\u003e• 6.0 L \/ 364 in3\u003cbr\u003e• 6.2 L \/ 376 in3\u003cbr\u003e• 7.0 L \/ 427 in3\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTES:\u003c\/b\u003e\u003cbr\u003eFits OEM intake manifolds.\u003cbr\u003eWill not fit TSP Velocity intake manifolds.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Tahoe\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nColor: Silver\u003cbr\u003e\nCrossover Pipe Included: Yes\u003cbr\u003e\nFinish: Clear Anodized\u003cbr\u003e\nFitting Thread Diameter: -8 AN\u003cbr\u003e\nFittings Included: Yes\u003cbr\u003e\nFuel Injection Type: Multi-port\u003cbr\u003e\nFuel Injector Quantity: 8\u003cbr\u003e\nFuel Injector Style: EV1\u003cbr\u003e\nFuel Injectors Included: No\u003cbr\u003e\nFuel Rail Style: OEM Style\u003cbr\u003e\nFuel System Type: Electronic Fuel Injection\u003cbr\u003e\nGasket Or Seal Included: Yes\u003cbr\u003e\nGrade Type: Performance\u003cbr\u003e\nInjection Style: Multi-port\u003cbr\u003e\nMaterial: Aluminum\u003cbr\u003e\nMounting Hardware Included: Yes\u003cbr\u003e\nMounting Hole Quantity: 6","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562040598824,"sku":"81010CA","price":176.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81010ca_001.jpg?v=1732636800"},{"product_id":"velocity-ls7-billet-aluminum-high-performance-fuel-rail-kit-clear-anodized","title":"Velocity LS7 Billet Aluminum High Performance Fuel Rail Kit - Clear Anodized","description":"\u003cp\u003eBuilt for GM LS7 rectangular-port applications, this fuel rail kit supports consistent injector fuel supply, clean rail routing, and dependable multi-port EFI operation in properly matched intake combinations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFuel Rail Delivery \u0026amp; Distribution\u003c\/strong\u003e\u003cbr\u003eThe custom design fuel rail layout uses -8AN connection details with crossover pipe included: Yes. It is designed to help maintain steady fuel distribution across the injector banks when paired with the correct pump, regulator, and line size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBillet Construction \u0026amp; Finish\u003c\/strong\u003e\u003cbr\u003eBillet Aluminum construction and included components listed as Fittings And Mounting Hardware support corrosion resistance, serviceability, and a clean installed appearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInjector \/ Manifold Matching\u003c\/strong\u003e\u003cbr\u003eInjection style is listed as Multi-Port. Confirm manifold compatibility, injector length, fuel line routing, and regulator layout before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; System Matching\u003c\/strong\u003e\u003cbr\u003eCommon use cases include Chevrolet Corvette, Chevrolet Camaro, custom LS7-powered builds. Verify manifold family, injector height, fuel fittings, and rail clearance before final assembly.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003e\"RECTANGULAR\" PORT TSP FABRICATED INTAKE MANIFOLDS\u003cbr\u003e\u003cbr\u003eNOTE: Designed for use with TSP manifolds only and will not fit stock manifolds.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Tahoe\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nInjection Style: Multi-Port\u003cbr\u003e\nFuel Rail Type: Custom  Design\u003cbr\u003e\nFittings: -8AN\u003cbr\u003e\nCrossover Pipe Included: Yes\u003cbr\u003e\nFuel Rail Material: Billet Aluminum\u003cbr\u003e\nIncluded: Fittings And Mounting Hardware","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562040926504,"sku":"81011CA","price":176.53,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm81011sl-1-600.jpg?v=1735923423"},{"product_id":"velocity-102-mm-4-bolt-ls-throttle-body-natural","title":"Velocity 102 mm 4-Bolt LS Throttle Body - Natural","description":"\u003cp\u003eDesigned for GM LS fuel injection applications, this throttle body supports responsive airflow control, EFI signal compatibility, and clean fitment on properly matched intake setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBore Size \u0026amp; Airflow Control\u003c\/strong\u003e\u003cbr\u003eThe bore size is listed as 102 mm, with a factory-style 4-Bolt Pattern bolt pattern helping match airflow capacity to the intake manifold and engine combination. Fuel system type is listed as Electronic Fuel Injection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThrottle Body Construction\u003c\/strong\u003e\u003cbr\u003eAluminum construction with a natural finish and gasket inclusion listed as No supports clean installation and long-term throttle-body service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSensor \/ Control Compatibility\u003c\/strong\u003e\u003cbr\u003eThrottle position sensor included: No. Idle air control motor included: No. Confirm drive-by-wire or cable setup, connector compatibility, and calibration requirements before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; Calibration Matching\u003c\/strong\u003e\u003cbr\u003eCommon use cases include Chevrolet Silverado, GMC Sierra, Chevrolet Camaro. Verify intake bore size, throttle control style, sensor configuration, and tuning requirements before installation.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003e102MM LSX TSP FABRICATED INTAKE MANIFOLDS\u003cbr\u003e• 81001\u003cbr\u003e• 81002\u003cbr\u003e• 81003\u003cbr\u003e• 81007\u003cbr\u003e\u003cbr\u003eNOTE: Will not fit 92mm intake manifolds\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Corvette\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nBore Diameter: 102 mm\u003cbr\u003e\nFuel Injectors Included: No\u003cbr\u003e\nFuel System Grade: Regular\u003cbr\u003e\nFuel System Injection Type: Multi-port\u003cbr\u003e\nFuel System Type: Electronic Fuel Injection\u003cbr\u003e\nGasket Or Seal Included: No\u003cbr\u003e\nIdle Air Control Motor Included: No\u003cbr\u003e\nIdle Air Control Motor Style: GM #17113598\u003cbr\u003e\nMounting Hardware Included: Yes\u003cbr\u003e\nThrottle Body Bolt Pattern: OEM 4-Bolt Pattern\u003cbr\u003e\nThrottle Body Finish: Natural\u003cbr\u003e\nThrottle Body Material: Aluminum\u003cbr\u003e\nThrottle Body Spacer Included: No\u003cbr\u003e\nThrottle Body Type: Drive by Cable\u003cbr\u003e\nThrottle Position Sensor Included: No\u003cbr\u003e\nThrottle Position Sensor Style: GM #17123852\u003cbr\u003e\nVenturi Quantity: 1","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562041221416,"sku":"81012","price":203.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/velocity81012_1600_2.jpg?v=1736446750"},{"product_id":"velocity-92-mm-4-bolt-ls-throttle-body-natural","title":"Velocity 92 mm 4-Bolt LS Throttle Body - Natural","description":"\u003cp\u003eDesigned for GM LS fuel injection applications, this throttle body supports responsive airflow control, EFI signal compatibility, and clean fitment on properly matched intake setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBore Size \u0026amp; Airflow Control\u003c\/strong\u003e\u003cbr\u003eThe bore size is listed as 92 mm, with a factory-style 4-Bolt Pattern bolt pattern helping match airflow capacity to the intake manifold and engine combination. Fuel system type is listed as Electronic Fuel Injection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThrottle Body Construction\u003c\/strong\u003e\u003cbr\u003eAluminum construction with a natural finish and gasket inclusion listed as No supports clean installation and long-term throttle-body service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSensor \/ Control Compatibility\u003c\/strong\u003e\u003cbr\u003eThrottle position sensor included: No. Idle air control motor included: No. Confirm drive-by-wire or cable setup, connector compatibility, and calibration requirements before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; Calibration Matching\u003c\/strong\u003e\u003cbr\u003eCommon use cases include Chevrolet Silverado, GMC Sierra, Chevrolet Camaro. Verify intake bore size, throttle control style, sensor configuration, and tuning requirements before installation.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003e102MM LSX TSP FABRICATED INTAKE MANIFOLDS\u003cbr\u003e• 81001\u003cbr\u003e• 81002\u003cbr\u003e• 81003\u003cbr\u003e• 81007\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Corvette\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nBore Diameter: 92 mm\u003cbr\u003e\nFuel Injectors Included: No\u003cbr\u003e\nFuel System Grade: Regular\u003cbr\u003e\nFuel System Injection Type: Multi-port\u003cbr\u003e\nFuel System Type: Electronic Fuel Injection\u003cbr\u003e\nGasket Or Seal Included: No\u003cbr\u003e\nIdle Air Control Motor Included: No\u003cbr\u003e\nIdle Air Control Motor Style: GM #17113598\u003cbr\u003e\nMounting Hardware Included: Yes\u003cbr\u003e\nThrottle Body Bolt Pattern: OEM 4-Bolt Pattern\u003cbr\u003e\nThrottle Body Finish: Natural\u003cbr\u003e\nThrottle Body Material: Aluminum\u003cbr\u003e\nThrottle Body Spacer Included: No\u003cbr\u003e\nThrottle Body Type: Drive by Cable\u003cbr\u003e\nThrottle Position Sensor Included: No\u003cbr\u003e\nThrottle Position Sensor Style: GM #17123852\u003cbr\u003e\nVenturi Quantity: 1","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562043711784,"sku":"81042","price":203.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/velocity81042m-2-1600_1.jpg?v=1732636866"},{"product_id":"gm-ls1-ls2-throttle-body-harness-adapter","title":"GM LS1 to LS2 Throttle Body Harness Adapter","description":"\u003cp\u003eDesigned for GM LS1\/LS2\/LS6 applications, this throttle body elbow helps adapt EFI throttle body placement to 4150-style intake layouts while supporting clean airflow routing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThrottle Body Adapter Fitment\u003c\/strong\u003e\u003cbr\u003eThese dimensions should be checked against hood clearance and throttle body placement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eElbow Construction \u0026amp; Layout\u003c\/strong\u003e\u003cbr\u003eDurable construction with a black finish The elbow helps create a clean transition between intake manifold and throttle body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSensor \/ Port Provisions\u003c\/strong\u003e\u003cbr\u003ePlan sensor placement, vacuum routing, and accessory clearance before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; Clearance Matching\u003c\/strong\u003e\u003cbr\u003eCommon use cases include Chevrolet Camaro, Pontiac Firebird, Chevrolet Corvette. Verify throttle body size, 4150 flange compatibility, cable bracket needs, and hood clearance before final assembly.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS BASED)\u003cbr\u003e• 6.2 L \/ 376 in3\u003cbr\u003e\u003cbr\u003eNOTE: Adapts 6\/2-pin LS1 harness to 6-pin LS2 applications\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Tahoe\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nAir Temperature Sensor Plug Included: No\u003cbr\u003e\nCable Type: Throttle Body Wiring Harness Adapter\u003cbr\u003e\nColor: Black\u003cbr\u003e\nHarness Plug Style: LS1 Throttle Body\u003cbr\u003e\nQuantity: Sold individually\u003cbr\u003e\nTerminal Gender: Female\u003cbr\u003e\nThrottle Body Style: LS2 Throttle Body\u003cbr\u003e\nWiring Harness Length: 12 in.","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562198409512,"sku":"81032","price":32.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81032-1600_1_1.jpg?v=1732640067"},{"product_id":"ls-ev1-to-multitec-fuel-injector-adapters","title":"LS EV1 to Multitec Fuel Injector Adapters","description":"\u003cp\u003eConfigured for GM LS fuel injection applications, this fuel injector set supports precise fuel metering, consistent cylinder-to-cylinder delivery, and EFI calibration flexibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInjector Flow \u0026amp; Fuel Metering\u003c\/strong\u003e\u003cbr\u003eThese details should be matched to the ECU, fuel pressure, and engine fuel demand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlug \/ Terminal Compatibility\u003c\/strong\u003e\u003cbr\u003eInjector plug style is Multec 2. Terminal details include Female gender, terminal type, and terminals. Connector compatibility should be verified before installation or adapter selection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInjector Body \u0026amp; O-Ring Fit\u003c\/strong\u003e\u003cbr\u003eConfirm fuel rail fit, intake fit, and injector depth before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalibration \u0026amp; System Matching\u003c\/strong\u003e\u003cbr\u003eCommon use cases include Chevrolet Silverado, GMC Sierra, Chevrolet Camaro. Injector flow rate, plug style, impedance, and calibration must be matched to the EFI system before startup.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eAdapts LS Multec 2 style injectors to harnesses with Jetronic, Minitimer, and EV1 connectors\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Corvette\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nCable Type: Fuel Injector Harness Connector\u003cbr\u003e\nColor: Black\u003cbr\u003e\nHarness Plug Style: EV1\u003cbr\u003e\nInjector Plug Style: Multec 2\u003cbr\u003e\nQuantity: Sold individually\u003cbr\u003e\nTerminal Gender: Female","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562199753000,"sku":"81035","price":29.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81035_001.jpg?v=1732640082"},{"product_id":"ls-ev1-to-ev6-fuel-injector-adapters","title":"LS EV1 to EV6 Fuel Injector Adapters","description":"\u003cp\u003eConfigured for GM LS fuel injection applications, this fuel injector set supports precise fuel metering, consistent cylinder-to-cylinder delivery, and EFI calibration flexibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInjector Flow \u0026amp; Fuel Metering\u003c\/strong\u003e\u003cbr\u003eThese details should be matched to the ECU, fuel pressure, and engine fuel demand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlug \/ Terminal Compatibility\u003c\/strong\u003e\u003cbr\u003eInjector plug style is EV1. Terminal details include Female gender, terminal type, and terminals. Connector compatibility should be verified before installation or adapter selection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInjector Body \u0026amp; O-Ring Fit\u003c\/strong\u003e\u003cbr\u003eConfirm fuel rail fit, intake fit, and injector depth before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalibration \u0026amp; System Matching\u003c\/strong\u003e\u003cbr\u003eCommon use cases include Chevrolet Silverado, GMC Sierra, Chevrolet Camaro. Injector flow rate, plug style, impedance, and calibration must be matched to the EFI system before startup.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eAdapts LS Multec 2 style injectors to harnesses with USCAR and EV6 connectors\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Corvette\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nCable Type: Fuel Injector Harness Connector\u003cbr\u003e\nColor: Black\u003cbr\u003e\nHarness Plug Style: Multec 2\u003cbr\u003e\nInjector Plug Style: EV1\u003cbr\u003e\nQuantity: Set of 8\u003cbr\u003e\nTerminal Gender: Female","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562199916840,"sku":"81036","price":29.33,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81036_002.jpg?v=1732640088"},{"product_id":"ls1-36-adjustable-stainless-steel-throttle-cable","title":"LS1 36\" Adjustable Stainless Steel Throttle Cable","description":"\u003cp\u003eBuilt for universal throttle linkage setups, this throttle cable supports adjustable pedal-to-throttle connection routing in properly matched EFI or carbureted applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCable Length \u0026amp; Travel\u003c\/strong\u003e\u003cbr\u003eCable length is listed as 36 in.. Cable style is Braided Stainless Wire. The cable should be routed to maintain smooth travel and full throttle return.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eJacket \/ End Fitting Details\u003c\/strong\u003e\u003cbr\u003eCable jacket details include Plastic. End fittings are listed as Yes. Confirm bracket compatibility and linkage geometry before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRouting \u0026amp; Linkage Setup\u003c\/strong\u003e\u003cbr\u003eVerify firewall routing, pedal travel, return spring setup, and throttle lever position before final adjustment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; Adjustment\u003c\/strong\u003e\u003cbr\u003eCommon use cases include custom EFI builds, restoration projects, and street performance applications requiring a properly routed throttle cable.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS BASED)\u003cbr\u003e• 5.7 L \/ 346 in3 LS1\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Tahoe\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nBrackets Included: No\u003cbr\u003e\nCable Jacket Finish: Black\u003cbr\u003e\nCable Jacket Material: Plastic\u003cbr\u003e\nEnd Fittings Included: Yes\u003cbr\u003e\nLength: 36 in.\u003cbr\u003e\nThrottle Cable Style: Braided Stainless Wire","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562200703272,"sku":"81059","price":32.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81059_001.jpg?v=1732640108"},{"product_id":"ls-style-58-psi-fuel-filter-pressure-regulator","title":"LS Style 58 PSI Fuel Filter Pressure Regulator","description":"\u003cp\u003eDesigned for GM LS-style and universal returnless fuel-system conversions, this fuel filter pressure regulator combines fuel filtration with fixed pressure control in a compact inline layout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFuel Filtration \u0026amp; Flow Performance\u003c\/strong\u003e\u003cbr\u003eThe regulator is configured for 58 Psi pressure control. Filtration is listed at 5 Microns. The inline layout helps combine filtration and regulation in one serviceable component. This setup is commonly used where a regulated feed line is needed for compatible EFI conversions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Fuel-System Durability\u003c\/strong\u003e\u003cbr\u003eIncluded filter element details with not included fittings included help simplify fuel-line planning while supporting dependable fuel cleanliness and pressure control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing, Ports \u0026amp; Installation Details\u003c\/strong\u003e\u003cbr\u003eInlet quantity is One. Outlet quantity is Two. Verify feed, return, and regulated outlet routing before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSystem Matching \u0026amp; Serviceability\u003c\/strong\u003e\u003cbr\u003eConfirm pump flow capacity, EFI pressure requirements, hose routing, mounting position, and service clearance before final assembly.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eUNIVERSAL\u003cbr\u003e\u003cbr\u003eIntended for gasoline\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eStreet performance applications\u003cbr\u003eRestoration projects\u003cbr\u003eCustom fuel-system builds\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nFilter Style: Inline\u003cbr\u003e\nInlet Quantity: One\u003cbr\u003e\nOutlet Quantity: Two\u003cbr\u003e\nFilter Element: Included\u003cbr\u003e\nSmallest Particle Filtered: 5 Microns\u003cbr\u003e\nElement Material: Paper\u003cbr\u003e\nHousing Material: Steel\u003cbr\u003e\nHousing Finish: Natural\u003cbr\u003e\nOverall Length: 5.660\"\u003cbr\u003e\nOutside Diameter: 2.175\"\u003cbr\u003e\nMounting Bracket: Included\u003cbr\u003e\nFittings: Not Included\u003cbr\u003e\nClamps: Not Included\u003cbr\u003e\nRegulator Style: Return\u003cbr\u003e\nMaximum Pressure: 58 Psi","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562203128104,"sku":"81095","price":54.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81095_001.jpg?v=1732640139"},{"product_id":"ls-style-58-psi-fuel-filter-pressure-regulator-with-6-an-fittings-and-25-hose","title":"LS Style 58 PSI Fuel Filter Pressure Regulator with -6 AN Fittings and 25' Hose","description":"\u003cp\u003eDesigned for compatible fuel-system service, this component helps complete or maintain properly matched fuel delivery layouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFuel Filtration \u0026amp; Flow Performance\u003c\/strong\u003e\u003cbr\u003eThe component supports fuel-system serviceability and dependable operation when matched to compatible fuel lines and fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Fuel-System Durability\u003c\/strong\u003e\u003cbr\u003eSteel construction with natural finish helps support long-term service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing, Ports \u0026amp; Installation Details\u003c\/strong\u003e\u003cbr\u003eVerify sizing, material compatibility, thread type, and fuel-system layout before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSystem Matching \u0026amp; Serviceability\u003c\/strong\u003e\u003cbr\u003eConfirm fuel compatibility, mounting clearance, and service access before final assembly.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eUNIVERSAL\u003cbr\u003e\u003cbr\u003eIntended for gasoline\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eStreet performance applications\u003cbr\u003eRestoration projects\u003cbr\u003eCustom fuel-system builds\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nFilter Style: Inline\u003cbr\u003e\nInlet Quantity: One\u003cbr\u003e\nInlet Attachment: Male\u003cbr\u003e\nOutlet Size: -6 An\u003cbr\u003e\nOutlet Quantity: Two\u003cbr\u003e\nOutlet Attachment: Male\u003cbr\u003e\nOutlet Size: -6 An\u003cbr\u003e\nFilter Element: Included\u003cbr\u003e\nSmallest Particle Filtered: 5 Microns\u003cbr\u003e\nElement Material: Paper\u003cbr\u003e\nHousing Material: Steel\u003cbr\u003e\nHousing Finish: Natural\u003cbr\u003e\nOverall Length: 5.660\"\u003cbr\u003e\nOutside Diameter: 2.175\"\u003cbr\u003e\nMounting Bracket: Included\u003cbr\u003e\nFittings: Included\u003cbr\u003e\nClamps: Not Included\u003cbr\u003e\nRegulator Style: Return\u003cbr\u003e\nMaximum Pressure: 58 Psi","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562203357480,"sku":"81095-1KT","price":217.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81095-1KT_01.jpg?v=1779294299"},{"product_id":"ls-efi-85-gph-fuel-pump-and-filter-regulator-kit","title":"LS EFI 85 GPH Fuel Pump and Filter Regulator Kit","description":"\u003cp\u003eDesigned for GM LS-style and universal returnless fuel-system conversions, this fuel filter pressure regulator combines fuel filtration with fixed pressure control in a compact inline layout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFuel Filtration \u0026amp; Flow Performance\u003c\/strong\u003e\u003cbr\u003eThe regulator is configured for 58 Psi pressure control. Filtration is listed at 5 Microns. The inline layout helps combine filtration and regulation in one serviceable component. This setup is commonly used where a regulated feed line is needed for compatible EFI conversions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Fuel-System Durability\u003c\/strong\u003e\u003cbr\u003eIncluded filter element details with included fittings included help simplify fuel-line planning while supporting dependable fuel cleanliness and pressure control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing, Ports \u0026amp; Installation Details\u003c\/strong\u003e\u003cbr\u003eInlet quantity is One. Outlet quantity is Two. Outlet sizing is listed as -8 An. Verify feed, return, and regulated outlet routing before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSystem Matching \u0026amp; Serviceability\u003c\/strong\u003e\u003cbr\u003eConfirm pump flow capacity, EFI pressure requirements, hose routing, mounting position, and service clearance before final assembly.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eUNIVERSAL\u003cbr\u003e\u003cbr\u003eIntended for gasoline EFI applications\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eStreet performance applications\u003cbr\u003eRestoration projects\u003cbr\u003eCustom fuel-system builds\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nPump Free Flow Rate: 320 Lph (85 Gph)\u003cbr\u003e\nPump Maximum Pressure: 90 Psi\u003cbr\u003e\nPump Housing Material: Aluminum\u003cbr\u003e\nPump Inlet Attachment: Female\u003cbr\u003e\nPump Inlet Size: -10 An\u003cbr\u003e\nPump Inlet Quantity: One\u003cbr\u003e\nPump Outlet Attachment: Female\u003cbr\u003e\nPump Outlet Size: -8 An\u003cbr\u003e\nPump Outlet Quantity: One\u003cbr\u003e\nFilter Type: Inline\u003cbr\u003e\nInlet Size: -10 An O-Ring\u003cbr\u003e\nInlet Attachment: Female\u003cbr\u003e\nOutlet Size: -10 An O-Ring\u003cbr\u003e\nOutlet Attachment: Female\u003cbr\u003e\nFilter Style: Inline\u003cbr\u003e\nInlet Quantity: One\u003cbr\u003e\nInlet Attachment: Male\u003cbr\u003e\nOutlet Size: -8 An\u003cbr\u003e\nOutlet Quantity: Two\u003cbr\u003e\nOutlet Attachment: Male\u003cbr\u003e\nOutlet Size: -8 An\u003cbr\u003e\nFilter Element: Included\u003cbr\u003e\nSmallest Particle Filtered: 5 Microns\u003cbr\u003e\nElement Material: Paper\u003cbr\u003e\nHousing Material: Steel\u003cbr\u003e\nHousing Finish: Natural\u003cbr\u003e\nOverall Length: 5.660\"\u003cbr\u003e\nOutside Diameter: 2.175\"\u003cbr\u003e\nMounting Bracket: Included\u003cbr\u003e\nFittings: Included\u003cbr\u003e\nClamps: Not Included\u003cbr\u003e\nRegulator Style: Return\u003cbr\u003e\nMaximum Pressure: 58 Psi","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562203521320,"sku":"81095-2KT","price":353.08,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81095-2kt_001.jpg?v=1732640149"},{"product_id":"ls-style-fuel-filter-pressure-regulator-fitting-kit","title":"LS Style Fuel Filter Pressure Regulator Fitting Kit","description":"\u003cp\u003eDesigned for compatible fuel-system service, this component helps complete or maintain properly matched fuel delivery layouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFuel Filtration \u0026amp; Flow Performance\u003c\/strong\u003e\u003cbr\u003eThe component supports fuel-system serviceability and dependable operation when matched to compatible fuel lines and fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Fuel-System Durability\u003c\/strong\u003e\u003cbr\u003eDurable construction helps support long-term service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing, Ports \u0026amp; Installation Details\u003c\/strong\u003e\u003cbr\u003eVerify sizing, material compatibility, thread type, and fuel-system layout before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSystem Matching \u0026amp; Serviceability\u003c\/strong\u003e\u003cbr\u003eConfirm fuel compatibility, mounting clearance, and service access before final assembly.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eUNIVERSAL\u003cbr\u003e\u003cbr\u003eThis kit contains fittings for TSP LS fuel filter pressure regulator.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eStreet performance applications\u003cbr\u003eRestoration projects\u003cbr\u003eCustom fuel-system builds\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nFitting Material: Aluminum\u003cbr\u003e\nFitting Color: Black Anodized","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562203750696,"sku":"81095-3KT","price":32.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81095-3kt_001.jpg?v=1732640154"},{"product_id":"ls-style-58-psi-fuel-filter-pressure-regulator-with-6-an-fittings","title":"LS Style 58 PSI Fuel Filter Pressure Regulator with -6 AN Fittings","description":"\u003cp\u003eDesigned for compatible fuel-system service, this component helps complete or maintain properly matched fuel delivery layouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFuel Filtration \u0026amp; Flow Performance\u003c\/strong\u003e\u003cbr\u003eThe component supports fuel-system serviceability and dependable operation when matched to compatible fuel lines and fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Fuel-System Durability\u003c\/strong\u003e\u003cbr\u003eSteel construction with natural finish helps support long-term service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing, Ports \u0026amp; Installation Details\u003c\/strong\u003e\u003cbr\u003eVerify sizing, material compatibility, thread type, and fuel-system layout before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSystem Matching \u0026amp; Serviceability\u003c\/strong\u003e\u003cbr\u003eConfirm fuel compatibility, mounting clearance, and service access before final assembly.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eUNIVERSAL\u003cbr\u003e\u003cbr\u003eIntended for gasoline\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eStreet performance applications\u003cbr\u003eRestoration projects\u003cbr\u003eCustom fuel-system builds\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nFilter Style: Inline\u003cbr\u003e\nInlet Quantity: One\u003cbr\u003e\nInlet Attachment: Male\u003cbr\u003e\nOutlet Size: -6 An\u003cbr\u003e\nOutlet Quantity: Two\u003cbr\u003e\nOutlet Attachment: Male\u003cbr\u003e\nOutlet Size: -6 An\u003cbr\u003e\nFilter Element: Included\u003cbr\u003e\nSmallest Particle Filtered: 5 Microns\u003cbr\u003e\nElement Material: Paper\u003cbr\u003e\nHousing Material: Steel\u003cbr\u003e\nHousing Finish: Natural\u003cbr\u003e\nOverall Length: 5.660\"\u003cbr\u003e\nOutside Diameter: 2.175\"\u003cbr\u003e\nMounting Bracket: Included\u003cbr\u003e\nFittings: Not Included\u003cbr\u003e\nClamps: Not Included\u003cbr\u003e\nRegulator Style: Return\u003cbr\u003e\nMaximum Pressure: 58 Psi","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562203849000,"sku":"81095-KT","price":81.47,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81095-KT_01.jpg?v=1779294445"},{"product_id":"8-an-male-efi-fuel-rail-adapter-fitting","title":"-8 AN Male EFI Fuel Rail Adapter Fitting","description":"\u003cp\u003e\u003cb\u003e-8 AN Male EFI Fuel Rail Adapter Fitting\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis EFI fuel rail adapter connects 3\/8\" Male Quick-Connect to -8 AN Male Thread for clean AN fuel line routing at the rail. The straight adapter layout helps simplify feed or return line plumbing on compatible EFI fuel rails, including TSP Velocity fuel rail assemblies with the matching connection style.\u003c\/p\u003e\n\u003cp\u003eUse it when adapting a quick-connect or spring-lock rail outlet to AN hose plumbing. Confirm the rail connection, AN thread size, hose end, sealing surface, and line routing clearance before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eUNIVERSAL \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eWhile this product is universal, its -8AN design fits perfectly with TSP Velocity fuel rails.\u003cbr\u003eVerify fuel rail connection style, AN size, hose end, sealing surface, and routing clearance before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFitting Style:\u003c\/b\u003e Fuel Rail\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAttachment 1:\u003c\/b\u003e 3\/8\" Male Quick-Connect\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAttachment 2:\u003c\/b\u003e -8 AN Male Thread\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFitting Angle:\u003c\/b\u003e Straight\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGauge Port:\u003c\/b\u003e No\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562203947304,"sku":"81097","price":12.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81097_1600.jpg?v=1732640164"},{"product_id":"tsp-ls-fuel-rail-adapter-fitting-spring-lock-female","title":"5\/16\" Spring Lock EFI Fuel Rail Adapter Fitting","description":"\u003cp\u003e\u003cb\u003e5\/16\" Spring Lock EFI Fuel Rail Adapter Fitting\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis EFI fuel rail adapter connects 5\/16 in Female Spring Lock to -8 AN Male Thread for clean AN fuel line routing at the rail. The straight adapter layout helps simplify feed or return line plumbing on compatible EFI fuel rails, including TSP Velocity fuel rail assemblies with the matching connection style.\u003c\/p\u003e\n\u003cp\u003eUse it when adapting a quick-connect or spring-lock rail outlet to AN hose plumbing. Confirm the rail connection, AN thread size, hose end, sealing surface, and line routing clearance before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eUNIVERSAL \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eWhile this product is universal, its -8AN design fits perfectly with TSP Velocity fuel rails.\u003cbr\u003eVerify fuel rail connection style, AN size, hose end, sealing surface, and routing clearance before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFitting Style:\u003c\/b\u003e Fuel Rail\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAttachment 1:\u003c\/b\u003e 5\/16 in Female Spring Lock\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAttachment 2:\u003c\/b\u003e -8 AN Male Thread\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFitting Angle:\u003c\/b\u003e Straight\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGauge Port:\u003c\/b\u003e No\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562204012840,"sku":"81098","price":14.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81098_1600.jpg?v=1732640169"},{"product_id":"velocity-cathedral-intake-port-o-ring-hardware-kit","title":"Velocity Cathedral Intake Port O-Ring \u0026 Hardware Kit","description":"\u003cp\u003eThis kit includes the port seals and hardware necessary to mount your cathedral-port TSP Velocity intake manifold. The included hardware is matched to the intended component style to support a clean, secure installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible With\u003c\/strong\u003e\u003cbr\u003eTSP Velocity LS intake manifolds with cathedral intake ports, part families 81001 \/ 81002\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCommon Vehicle Applications\u003c\/strong\u003e\u003cbr\u003e• LS1, LS2, and LS6-style cathedral-port intake manifold combinations\u003cbr\u003e• Cathedral-port GM LS engine swaps using TSP Velocity intake components\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eIntake Port O-rings Included:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eIntake Port Shape:\u003c\/strong\u003e Cathedral\u003cbr\u003e\u003cstrong\u003eMounting Hardware Included:\u003c\/strong\u003e Yes\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562205716776,"sku":"81701","price":19.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81701-1600.jpg?v=1732640215"},{"product_id":"velocity-rectangle-intake-port-o-ring-hardware-kit","title":"Velocity Rectangle Intake Port O-Ring \u0026 Hardware Kit","description":"\u003cp\u003eThis kit includes the port seals and hardware necessary to mount your rectangle-port TSP Velocity intake manifold. The included hardware is matched to the intended component style to support a clean, secure installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible With\u003c\/strong\u003e\u003cbr\u003eTSP Velocity LS intake manifolds with rectangular intake ports, part family 81003\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCommon Vehicle Applications\u003c\/strong\u003e\u003cbr\u003e• LS3, L92, and LS7-style rectangular-port intake manifold combinations\u003cbr\u003e• Rectangular-port GM LS engine swaps using TSP Velocity intake components\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eIntake Port O-rings Included:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eIntake Port Shape:\u003c\/strong\u003e Rectangle\u003cbr\u003e\u003cstrong\u003eMounting Hardware Included:\u003c\/strong\u003e Yes\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562206011688,"sku":"81703","price":19.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81703-1600.jpg?v=1732640221"},{"product_id":"velocity-cathedral-port-intake-fuel-rail-hardware-kit","title":"Velocity Cathedral Port Intake Fuel Rail Hardware Kit","description":"\u003cp\u003eBuilt for compatible EFI fuel-system applications, this fuel rail kit supports consistent injector fuel supply, clean rail routing, and dependable multi-port EFI operation in properly matched intake combinations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFuel Rail Delivery \u0026amp; Distribution\u003c\/strong\u003e\u003cbr\u003eThe fuel rail layout It is designed to help maintain steady fuel distribution across the injector banks when paired with the correct pump, regulator, and line size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBillet Construction \u0026amp; Finish\u003c\/strong\u003e\u003cbr\u003eDurable rail construction support corrosion resistance, serviceability, and a clean installed appearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInjector \/ Manifold Matching\u003c\/strong\u003e\u003cbr\u003eFuel rail brackets included: Yes. Confirm manifold compatibility, injector length, fuel line routing, and regulator layout before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; System Matching\u003c\/strong\u003e\u003cbr\u003eCommon use cases include street performance applications, restoration projects, custom EFI builds. Verify manifold family, injector height, fuel fittings, and rail clearance before final assembly.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eFits TSP Velocity \"cathedral\" port LS intake and fuel rails (81001\/2 and 81008)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Tahoe\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nFuel Rail Brackets Included: Yes\u003cbr\u003e\nIntake Manifold Style: TSP Cathedral Port\u003cbr\u003e\nMounting Hardware Included: Yes","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562206109992,"sku":"81708","price":17.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81708_01.jpg?v=1767134886"},{"product_id":"velocity-rectangular-port-intake-fuel-rail-hardware-kit","title":"Velocity Rectangular Port Intake Fuel Rail Hardware Kit","description":"\u003cp\u003eBuilt for compatible EFI fuel-system applications, this fuel rail kit supports consistent injector fuel supply, clean rail routing, and dependable multi-port EFI operation in properly matched intake combinations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFuel Rail Delivery \u0026amp; Distribution\u003c\/strong\u003e\u003cbr\u003eThe fuel rail layout It is designed to help maintain steady fuel distribution across the injector banks when paired with the correct pump, regulator, and line size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBillet Construction \u0026amp; Finish\u003c\/strong\u003e\u003cbr\u003eDurable rail construction support corrosion resistance, serviceability, and a clean installed appearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInjector \/ Manifold Matching\u003c\/strong\u003e\u003cbr\u003eFuel rail brackets included: Yes. Confirm manifold compatibility, injector length, fuel line routing, and regulator layout before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; System Matching\u003c\/strong\u003e\u003cbr\u003eCommon use cases include street performance applications, restoration projects, custom EFI builds. Verify manifold family, injector height, fuel fittings, and rail clearance before final assembly.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eFits TSP Velocity rectangular port LS3 intake and fuel rails (81003 and 81009)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Tahoe\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nFuel Rail Brackets Included: Yes\u003cbr\u003e\nIntake Manifold Style: TSP Rectangle Port\u003cbr\u003e\nMounting Hardware Included: Yes","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562206175528,"sku":"81709","price":17.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81709_01.jpg?v=1774474733"},{"product_id":"ls1-ls2-ls6-cathedral-port-intake-manifold-gaskets","title":"LS1, LS2, LS6 Intake Manifold Gaskets","description":"\u003cp\u003eThis set of intake manifold gaskets are designed for the LS \"Cathedral\" style ports. They're manufactured of premium rubber to ensure a secure seal, keeping dirt and debris out and air and fuel in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible With\u003c\/strong\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS-BASED)\u003cbr\u003e• 4.8 L \/ 293 in³ (LR4)\u003cbr\u003e• 5.3 L \/ 325 in³ (L33, L59, LM4, LM7)\u003cbr\u003e• 5.7 L \/ 346 in³ (LS1, LS6)\u003cbr\u003e• 6.0 L \/ 364 in³ (LQ4, LQ9, LS2)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCommon Vehicle Applications\u003c\/strong\u003e\u003cbr\u003e• Chevrolet Corvette LS-powered models\u003cbr\u003e• Chevrolet Camaro LS-powered models\u003cbr\u003e• Chevrolet Silverado and GMC Sierra LS-based V8 trucks\u003cbr\u003e• Chevrolet Tahoe, Suburban, GMC Yukon, and Escalade LS-based V8 SUVs\u003cbr\u003e• Pontiac GTO, Pontiac G8, and Chevrolet SS LS-powered cars\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003cbr\u003e• Fits LS-based engines with \"cathedral\" intake port shape only (LS1\/LS2\/LS6).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber\u003cbr\u003e\u003cstrong\u003eValley Pan Included:\u003c\/strong\u003e No\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562230948136,"sku":"GK013","price":13.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/gk013_001.jpg?v=1732640800"},{"product_id":"ls3-l92-rectangle-port-intake-manifold-gaskets","title":"LS3, L92 Intake Manifold Gaskets","description":"\u003cp\u003eThis set of intake manifold gaskets are designed for the LS \"Rectangular\" style ports. They're manufactured of premium rubber to ensure a secure seal, keeping dirt and debris out and air and fuel in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible With\u003c\/strong\u003e\u003cbr\u003eLS-based engines with \"rectangular\" intake port shape only (LS3\/L92)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCommon Vehicle Applications\u003c\/strong\u003e\u003cbr\u003e• LS3, L92, and LS7-style rectangular-port intake manifold combinations\u003cbr\u003e• Rectangular-port GM LS engine swaps using TSP Velocity intake components\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber\u003cbr\u003e\u003cstrong\u003eValley Pan Included:\u003c\/strong\u003e No\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562231046440,"sku":"GK014","price":13.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/gk014_001.jpg?v=1732640804"},{"product_id":"velocity-high-flow-fuel-injectors-for-ls1-ls2-ls6-and-5-0l-coyote-36lbs","title":"Velocity High-Flow Fuel Injectors for LS1, LS2, LS6, and 5.0L Coyote - 36lbs","description":"\u003cp\u003eConfigured for GM LS1\/LS2\/LS6 applications, this fuel injector set supports precise fuel metering, consistent cylinder-to-cylinder delivery, and EFI calibration flexibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInjector Flow \u0026amp; Fuel Metering\u003c\/strong\u003e\u003cbr\u003eFlow rate is listed at 36 lbs.\/hr.. Impedance is listed as High. Driver type is listed as 12V Saturated Circuit. These details should be matched to the ECU, fuel pressure, and engine fuel demand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlug \/ Terminal Compatibility\u003c\/strong\u003e\u003cbr\u003eInjector plug style is USCAR. Terminal details include Male gender, Blade terminal type, and 2 terminals. Connector compatibility should be verified before installation or adapter selection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInjector Body \u0026amp; O-Ring Fit\u003c\/strong\u003e\u003cbr\u003eSeat-to-seat height is 2.078 in.. Maximum outside diameter is 0.580 in.. O-ring details include manifold O-ring 0.580 in. and rail O-ring 0.551 in.. Confirm fuel rail fit, intake fit, and injector depth before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalibration \u0026amp; System Matching\u003c\/strong\u003e\u003cbr\u003eCommon use cases include Chevrolet Camaro, Pontiac Firebird, Chevrolet Corvette. Injector flow rate, plug style, impedance, and calibration must be matched to the EFI system before startup.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eFITS THE FOLLOWING TSP VELOCITY COMBINATIONS:\u003cbr\u003e• 81001 LS1\/LS2\/LS6 Intake Manifold with 81008 Fuel Rails\u003cbr\u003e• 81002 LS1\/LS2\/LS6 Intake Manifold with 81008 Fuel Rails\u003cbr\u003e• 84050 Ford 5.0L Coyote Intake Manifold with 84051 Fuel Rails\u003cbr\u003e\u003cbr\u003eNOTE: Fitment with LS1 requires conversion from EV1M to EV6F connectors (adapters included).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Tahoe\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nDriver Type: 12V Saturated Circuit\u003cbr\u003e\nFlow Rate: 36 lbs.\/hr.\u003cbr\u003e\nFuel Injection Type: Multi-port\u003cbr\u003e\nFuel Rail O-ring Outer Diameter: 0.551 in.\u003cbr\u003e\nFuel Type: Gas\u003cbr\u003e\nImpedance: High\u003cbr\u003e\nInjector Plug Style: USCAR\u003cbr\u003e\nManifold O-ring Outer Diameter: 0.580 in.\u003cbr\u003e\nMaximum Outside Diameter: 0.580 in.\u003cbr\u003e\nO-Ring Quantity: 2\u003cbr\u003e\nO-rings Included: Yes\u003cbr\u003e\nQuantity: Set of 8\u003cbr\u003e\nSeat to Seat Height: 2.078 in.\u003cbr\u003e\nTerminal Gender: Male\u003cbr\u003e\nTerminal Quantity: 2\u003cbr\u003e\nTerminal Type: Blade","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49787586314536,"sku":"81050-36","price":293.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81050-36-01.jpg?v=1779909687"},{"product_id":"velocity-high-flow-fuel-injectors-for-ls3-and-ls7-flow-rate-52lb","title":"Velocity High-Flow Fuel Injectors for LS3 and LS7 - Flow Rate 52lbs","description":"\u003cp\u003eConfigured for GM LS3\/L92 rectangular-port applications, this fuel injector set supports precise fuel metering, consistent cylinder-to-cylinder delivery, and EFI calibration flexibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInjector Flow \u0026amp; Fuel Metering\u003c\/strong\u003e\u003cbr\u003eFlow rate is listed at 52 lbs.\/hr.. Driver type is listed as 12V Saturated Circuit. These details should be matched to the ECU, fuel pressure, and engine fuel demand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlug \/ Terminal Compatibility\u003c\/strong\u003e\u003cbr\u003eInjector plug style is USCAR. Terminal details include Male gender, Blade terminal type, and 2 terminals. Connector compatibility should be verified before installation or adapter selection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInjector Body \u0026amp; O-Ring Fit\u003c\/strong\u003e\u003cbr\u003eSeat-to-seat height is 1.480 in.. Maximum outside diameter is 0.580 in.. O-ring details include manifold O-ring 0.580 in. and rail O-ring 0.551 in.. Confirm fuel rail fit, intake fit, and injector depth before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalibration \u0026amp; System Matching\u003c\/strong\u003e\u003cbr\u003eCommon use cases include Chevrolet Camaro, Chevrolet Corvette, Chevrolet Silverado. Injector flow rate, plug style, impedance, and calibration must be matched to the EFI system before startup.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eFITS THE FOLLOWING TSP VELOCITY COMBINATIONS\u003cbr\u003e• 81003 LS3 Intake Manifold with 81009 Fuel Rails\u003cbr\u003e• 81007 LS7 Intake Manifold with 81011 Fuel Rails\u003cbr\u003e\u003cbr\u003eNOTE: Will not work with stock applications\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Tahoe\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nDriver Type: 12V Saturated Circuit\u003cbr\u003e\nFlow Rate: 52 lbs.\/hr.\u003cbr\u003e\nFuel Injection Type: Multi-port\u003cbr\u003e\nFuel Rail O-ring Outer Diameter: 0.551 in.\u003cbr\u003e\nFuel Type: Gas\u003cbr\u003e\nInjector Plug Style: USCAR\u003cbr\u003e\nManifold O-ring Outer Diameter: 0.580 in.\u003cbr\u003e\nMaximum Outside Diameter: 0.580 in.\u003cbr\u003e\nO-Ring Quantity: 2\u003cbr\u003e\nO-rings Included: Yes\u003cbr\u003e\nQuantity: Set of 8\u003cbr\u003e\nSeat to Seat Height: 1.480 in.\u003cbr\u003e\nTerminal Gender: Male\u003cbr\u003e\nTerminal Quantity: 2\u003cbr\u003e\nTerminal Type: Blade","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49787607712040,"sku":"81051-52","price":426.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81051-52-01.jpg?v=1779910188"},{"product_id":"gm-ls-cathedral-port-v-series-billet-aluminum-low-rise-intake-manifold-natural","title":"GM LS Cathedral Port V Series Billet Aluminum Low-Rise Intake Manifold - Natural","description":"\u003cp\u003e\u003cspan\u003eUpgrade your LS-powered build with the Top Street Performance GM LS Cathedral Port V Series Billet Aluminum Low-Rise Intake Manifold. Designed for GM Gen III cathedral-port LS engines, this LS billet intake manifold combines premium T-6061 billet aluminum construction, exceptional airflow capability, and a modular design that supports high-performance street, race, and LS swap applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFresh off its award-winning appearance at the 2024 SEMA Show, the V Series intake manifold was engineered to improve airflow efficiency, enhance throttle response, and deliver the performance potential serious LS enthusiasts demand. The low-rise design provides improved hood clearance for many LS swap, street performance, and restomod applications while maintaining the airflow needed for high-horsepower engine combinations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eManufactured from T-6061 billet aluminum, this LS cathedral port intake manifold offers exceptional durability, premium appearance, and precise machining throughout. The modular design simplifies installation, maintenance, and future upgrades, while included custom V Series fuel rails help create a clean, professional engine bay appearance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhether you're upgrading an LS1 intake manifold, building a turbocharged 5.3 LS, improving airflow on a 6.0 LS combination, or completing a custom LS swap, this billet aluminum LS intake manifold provides the airflow capacity, serviceability, and performance-focused design needed for serious street and competition builds.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBillet Aluminum Intake Manifold Technology\u003c\/strong\u003e\u003cbr\u003eThe Top Street Performance V Series Intake Manifold is manufactured from premium T-6061 billet aluminum and engineered specifically for GM Gen III cathedral-port LS engines. Precision-machined construction provides exceptional strength, durability, and appearance while creating a premium engine bay upgrade for street and racing applications. The modular design simplifies installation, maintenance, and future modifications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerformance Benefits\u003c\/strong\u003e\u003cbr\u003eThe runner design is engineered to improve airflow efficiency and support increased engine performance across a broad RPM range. Combined with a low-rise configuration, this intake manifold delivers excellent airflow capability while helping maintain hood clearance in many LS swap and performance vehicle applications. The multi-port EFI design supports naturally aspirated and boosted engine combinations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eGM Gen III Cathedral Port LS Engines\u003cbr\u003e• 4.8 L \/ 293 in3\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 5.7 L \/ 346 in3\u003cbr\u003e• 6.0 L \/ 364 in3\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003e• Chevrolet Camaro LS swaps\u003cbr\u003e• Chevrolet Corvette LS1 \u0026amp; LS6 applications\u003cbr\u003e• Chevrolet Silverado LS builds\u003cbr\u003e• Chevrolet C10 LS conversions\u003cbr\u003e• Chevrolet Chevelle LS swaps\u003cbr\u003e• Pontiac GTO LS projects\u003cbr\u003e• Custom street rods and restomods\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003e• Fits GM Gen III cathedral-port LS cylinder heads\u003cbr\u003e• Designed for electronic fuel injection (EFI) applications\u003cbr\u003e• Includes custom V Series fuel rails\u003cbr\u003e• Features Gen IV 3-bar MAP sensor provision\u003cbr\u003e• Uses EV1-style injector provisions\u003cbr\u003e• Billet aluminum construction with natural finish\u003cbr\u003e• Low-rise design helps improve hood clearance in many applications\u003cbr\u003e• Verify throttle body, fuel system, injector, and hood clearance before installation\u003cbr\u003e• Not compatible with rectangle-port LS cylinder heads\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eBasic Operating RPM Range: 1,500-9,000 RPM\u003cbr\u003eCenter Maximum Height: 8.750 in.\u003cbr\u003eColor: Silver\u003cbr\u003eDeck Height: Standard\u003cbr\u003eEGR Port: Yes\u003cbr\u003eFront Maximum Height: 8.286 in.\u003cbr\u003eFuel Injection Style: Multi-port Fuel Injection\u003cbr\u003eFuel Injector Stye Provision: EV1\u003cbr\u003eFuel Rail Color: Silver\u003cbr\u003eFuel Rail Finish: Natural\u003cbr\u003eFuel Rail Fitting Thread Diameter: -10 AN\u003cbr\u003eFuel Rail Material: Aluminum\u003cbr\u003eFuel Rails Included: Yes\u003cbr\u003eFuel System Type: Electronic Fuel Injection\u003cbr\u003eGasket Or Seal Included: Yes\u003cbr\u003eGrade Type: Performance\u003cbr\u003eIntake Port Shape: Cathedral\u003cbr\u003eManifold Absolute Pressure Sensor Port Included: Yes\u003cbr\u003eManifold Absolute Pressure Sensor Port Style: Gen IV 3-bar\u003cbr\u003eManifold Finish: Natural\u003cbr\u003eMaterial: Aluminum\u003cbr\u003eMounting Hardware Included: Yes\u003cbr\u003eMounting Hole Quantity: 10\u003cbr\u003ePlenum Thickness: 8 mm\u003cbr\u003eRear Maximum Height: 7.132 in.\u003cbr\u003eRemovable Runners: Yes\u003cbr\u003eRemovable Throttle Body Flange: Yes\u003cbr\u003eRemovable Top: Yes\u003cbr\u003eRunner Length: 3.000 in.\u003cbr\u003eSingle Or Dual Plane Type: Single Plane\u003cbr\u003eSupplemental Boss Quantity: 2\u003cbr\u003eThrottle Body Bore Size: 102.200 mm\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49808283599144,"sku":"81406","price":4395.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81406_01_8f398fc0-1566-4a2c-a761-175c22bc82d4.jpg?v=1739831104"},{"product_id":"gm-ls-rectangle-port-v-series-billet-aluminum-low-rise-intake-manifold-natural","title":"GM LS Rectangle Port V Series Billet Aluminum Low-Rise Intake Manifold - Natural","description":"\u003cp\u003eUpgrade your LS-powered build with the Top Street Performance GM LS Rectangle Port V Series Billet Aluminum Low-Rise Intake Manifold. Designed for GM Gen IV rectangle port LS engines, including 4.8L, 5.3L, 6.0L, 6.2L, and 7.0L applications, this LS billet intake manifold combines premium T-6061 billet aluminum construction, exceptional airflow capability, and a low-rise design ideal for street performance, racing, truck builds, and LS swap projects.\u003c\/p\u003e\n\u003cp\u003eFresh off its award-winning appearance at the 2024 SEMA Show, the V Series intake manifold was engineered to improve airflow efficiency, enhance throttle response, and support high-horsepower EFI engine combinations. The low-rise design helps maximize hood clearance in many LS swap and performance vehicle applications while maintaining the airflow capacity required for serious street and competition builds.\u003c\/p\u003e\n\u003cp\u003ePrecision-machined from T-6061 billet aluminum, this LS rectangle port intake manifold delivers exceptional strength, durability, and serviceability. The modular construction simplifies installation and maintenance, while the included custom V Series fuel rails provide a clean, professional appearance and support modern EFI fuel systems.\u003c\/p\u003e\n\u003cp\u003eWhether you're upgrading a 5.3 LS intake manifold, building a high-performance 6.0 LS combination, improving airflow on a 6.2 LS engine, or completing a custom 7.0 LS project, this billet aluminum intake manifold delivers the airflow, serviceability, and performance potential demanded by today's LS enthusiasts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBillet Aluminum Intake Manifold Technology\u003c\/strong\u003e\u003cbr\u003eThe Top Street Performance V Series Intake Manifold is manufactured from premium T-6061 billet aluminum and engineered specifically for GM Gen IV rectangle port LS engines. Precision-machined construction provides exceptional durability, premium appearance, and improved serviceability for street, racing, and LS swap applications. The modular design allows easier maintenance and future upgrades while delivering a standout engine bay appearance.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerformance Benefits\u003c\/strong\u003e\u003cbr\u003eDesigned to improve airflow efficiency and throttle response, this LS billet intake manifold supports naturally aspirated and boosted EFI engine combinations. The low-rise configuration helps improve hood clearance in many LS swap and performance vehicle applications while maintaining the airflow capability required for high-horsepower street and competition builds.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eGM Gen IV Rectangle Port LS Engines\u003cbr\u003e• 4.8 L \/ 293 in3\u003cbr\u003e• 5.3 L \/ 325 in3 \u003cbr\u003e• 6.0 L \/ 364 in3 \u003cbr\u003e• 6.2 L \/ 376 in3 \u003cbr\u003e• 7.0 L \/ 428 in3 \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003e• Chevrolet Camaro LS builds\u003cbr\u003e• Chevrolet Corvette LS builds\u003cbr\u003e• Chevrolet Silverado performance projects\u003cbr\u003e• Chevrolet C10 LS swaps\u003cbr\u003e• Chevrolet Chevelle LS conversions\u003cbr\u003e• Pontiac GTO LS projects\u003cbr\u003e• Custom street rods and restomods\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003e• Fits GM Gen IV rectangle port LS cylinder heads\u003cbr\u003e• Designed for electronic fuel injection applications\u003cbr\u003e• Includes custom V Series fuel rails\u003cbr\u003e• Features Gen IV 3-Bar MAP sensor provision\u003cbr\u003e• Uses EV1 injector provisions\u003cbr\u003e• Billet aluminum construction with natural finish\u003cbr\u003e• Low-rise design helps improve hood clearance in many applications\u003cbr\u003e• Verify throttle body, fuel system, injector, and hood clearance before installation\u003cbr\u003e• Not compatible with cathedral port LS cylinder heads\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eBasic Operating RPM Range: 1,500-9,000 RPM\u003cbr\u003eCenter Maximum Height: 8.750 in.\u003cbr\u003eColor: Silver\u003cbr\u003eDeck Height: Standard\u003cbr\u003eEGR Port: Yes\u003cbr\u003eFront Maximum Height: 8.286 in.\u003cbr\u003eFuel Injection Style: Multi-port Fuel Injection\u003cbr\u003eFuel Injector Stye Provision: EV1\u003cbr\u003eFuel Rail Color: Silver\u003cbr\u003eFuel Rail Finish: Natural\u003cbr\u003eFuel Rail Fitting Thread Diameter: -10 AN\u003cbr\u003eFuel Rail Material: Aluminum\u003cbr\u003eFuel Rails Included: Yes\u003cbr\u003eFuel System Type: Electronic Fuel Injection\u003cbr\u003eGasket Or Seal Included: Yes\u003cbr\u003eGrade Type: Performance\u003cbr\u003eIntake Port Shape: Rectangle\u003cbr\u003eManifold Absolute Pressure Sensor Port Included: Yes\u003cbr\u003eManifold Absolute Pressure Sensor Port Style: Gen IV 3-bar\u003cbr\u003eManifold Finish: Natural\u003cbr\u003eMaterial: Aluminum\u003cbr\u003eMounting Hardware Included: Yes\u003cbr\u003eMounting Hole Quantity: 10\u003cbr\u003ePlenum Thickness: 8 mm\u003cbr\u003eRear Maximum Height: 7.132 in.\u003cbr\u003eRemovable Runners: Yes\u003cbr\u003eRemovable Throttle Body Flange: Yes\u003cbr\u003eRemovable Top: Yes\u003cbr\u003eRunner Length: 3.000 in.\u003cbr\u003eSingle Or Dual Plane Type: Single Plane\u003cbr\u003eSupplemental Boss Quantity: 2\u003cbr\u003eThrottle Body Bore Size: 102.200 mm\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49808335470888,"sku":"81412","price":3516.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81412-01.jpg?v=1740672068"},{"product_id":"gm-ls-102mm-aluminum-intake-manifold-clear-anodized","title":"GM LS 102mm Aluminum Intake Manifold - Clear Anodized","description":"\u003cp\u003eUpgrade your LS-powered build with the Top Street Performance GM LS 102mm Aluminum Intake Manifold. Designed for GM LS cathedral-port engines, this fabricated aluminum intake manifold delivers increased airflow capacity, improved throttle response, and enhanced high-RPM performance for street performance, drag racing, LS swap, and boosted engine applications.\u003c\/p\u003e\n\u003cp\u003eEngineered around a large 102mm throttle body opening, this LS intake manifold is designed to maximize airflow for high-output engine combinations. The fabricated aluminum construction features a large center plenum, short runners, and velocity stack runner entries that help improve airflow efficiency and cylinder distribution compared to many stock-style intake manifolds. \u003cspan class=\"\" data-state=\"closed\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eConstructed from TIG-welded T-6061 aluminum, this LS fabricated intake manifold provides exceptional durability while maintaining a lightweight design. Individual port O-rings help ensure a reliable seal at each intake runner and throttle body opening, while the clear anodized finish provides corrosion resistance and a clean performance appearance. \u003cspan class=\"\" data-state=\"closed\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWhether you're upgrading a 5.3 LS intake manifold, building a high-performance 6.0 LS combination, completing a turbocharged LS project, or looking for a 102mm intake manifold capable of supporting serious horsepower, this LS aluminum intake manifold delivers the airflow and performance potential demanded by performance enthusiasts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFabricated Aluminum Intake Manifold Technology\u003c\/strong\u003e\u003cbr\u003eThe Top Street Performance LS 102mm Intake Manifold is engineered for enthusiasts seeking increased airflow and improved engine performance. Manufactured from TIG-welded T-6061 aluminum, this fabricated intake manifold utilizes a large center plenum, short runners, and velocity stack runner entries to help maximize airflow throughout the operating range. Individual port O-rings provide a secure seal while the clear anodized finish offers durability and corrosion resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerformance Benefits\u003c\/strong\u003e\u003cbr\u003eDesigned for performance-oriented LS engine combinations, the single-plane intake design and 102mm throttle body opening support increased airflow demand for naturally aspirated and boosted applications. The runner and plenum design help provide balanced airflow distribution while supporting strong throttle response and high-RPM performance. Designed for a 1,500-6,500 RPM operating range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eGM LS Cathedral Port Engines\u003cbr\u003e• 4.8 L \/ 293 in3 (LR4)\u003cbr\u003e• 5.3 L \/ 325 in3 (L33, L59, LM4, LM7)\u003cbr\u003e• 5.7 L \/ 346 in3 (LS1, LS6)\u003cbr\u003e• 6.0 L \/ 364 in3 (LQ4, LQ9, LS2)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003e• Chevrolet Silverado\u003cbr\u003e• GMC Sierra\u003cbr\u003e• Chevrolet Camaro\u003cbr\u003e• Chevrolet Corvette\u003cbr\u003e• Chevrolet Tahoe\u003cbr\u003e• CTS-V\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003e• Fits LS-based engines with cathedral-port intake ports only\u003cbr\u003e• Designed for electronic fuel injection applications\u003cbr\u003e• 102mm throttle body opening\u003cbr\u003e• Multi-port EFI configuration\u003cbr\u003e• EV1 injector provisions\u003cbr\u003e• LSA\/LS9-style MAP sensor bung (GM #12592525)\u003cbr\u003e• Individual intake runner O-ring seals\u003cbr\u003e• Verify hood clearance, fuel system compatibility, throttle body compatibility, and accessory clearance before installation\u003cbr\u003e• Not compatible with rectangle-port LS cylinder heads\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eBasic Operating RPM Range: 1,500-6,500 RPM\u003cbr\u003eCenter Maximum Height: 6.750 in.\u003cbr\u003eColor: Clear Anodized\u003cbr\u003eDeck Height: Standard\u003cbr\u003eFinish: Clear Anodized\u003cbr\u003eFront Maximum Height: 6.750 in.\u003cbr\u003eFuel Injection Style: Multi-port\u003cbr\u003eFuel Injector Stye Provision: EV1\u003cbr\u003eGasket Or Seal Included: Yes\u003cbr\u003eGrade Type: Performance\u003cbr\u003eIntake Port Shape: Cathedral\u003cbr\u003eMaterial: Aluminum\u003cbr\u003ePlenum Material: Aluminum\u003cbr\u003ePlenum Thickness: 4 mm\u003cbr\u003eRear Maximum Height: 6.750 in.\u003cbr\u003eRunner Length: 5.000 in.\u003cbr\u003eSupplemental Boss Quantity: 4\u003cbr\u003eThrottle Body Bore Size: 102 mm\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49811413467432,"sku":"81001CA","price":679.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81001CA_01.jpg?v=1739294312"},{"product_id":"velocity-gm-ls-102mm-fly-by-wire-billet-aluminum-throttle-body-housing-natural","title":"Velocity GM LS 102mm Fly-by-Wire Billet Aluminum Throttle Body Housing - Natural","description":"\u003cp\u003eDesigned for GM LS fuel injection applications, this throttle body supports responsive airflow control, EFI signal compatibility, and clean fitment on properly matched intake setups.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBore Size \u0026amp; Airflow Control\u003c\/strong\u003e\u003cbr\u003eThe bore size is listed as 102 mm, with a Standard OE 4-Bolt Pattern bolt pattern helping match airflow capacity to the intake manifold and engine combination.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThrottle Body Construction\u003c\/strong\u003e\u003cbr\u003eBillet Aluminum construction with a natural, black, or polished finish supports clean installation and long-term throttle-body service.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSensor \/ Control Compatibility\u003c\/strong\u003e\u003cbr\u003eThis throttle body is a bare housing only and does not include throttle body electronics or actuator components. Designed to reuse factory GM LS3 drive-by-wire electronics and hardware. Confirm drive-by-wire or cable setup, connector compatibility, and calibration requirements before installation.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; Calibration Matching\u003c\/strong\u003e\u003cbr\u003eCommon use cases include Chevrolet Silverado, GMC Sierra, Chevrolet Camaro. Verify intake bore size, throttle control style, sensor configuration, and tuning requirements before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS BASED)\u003cbr\u003e• 4.8 L \/ 293 in3\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 5.7 L \/ 346 in3\u003cbr\u003e• 6.0 L \/ 364 in3\u003cbr\u003e• 6.2 L \/ 376 in3\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTES:\u003c\/b\u003e Fits intakes with OE style LS 4-bolt pattern\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Corvette\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eInjection Style: Multi-Port\u003cbr\u003eThrottle Style: Drive By Wire\u003cbr\u003eThrottle Body Bore Size: 102 mm\u003cbr\u003eThrottle Body Bolt Pattern: Standard OE 4-Bolt Pattern\u003cbr\u003eThrottle Body Material: Billet Aluminum\u003cbr\u003eThrottle Body Finish: Natural, Black, or Polished\u003cbr\u003eVenturi Quantity: 1\u003cbr\u003eIncluded: Mounting Bolts\u003cbr\u003eIncludes Electronics: No\u003cbr\u003eElectronics Compatibility: Reuses OEM GM LS3 drive-by-wire electronics\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49903134114088,"sku":"81041","price":440.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81041_03.jpg?v=1764793574"},{"product_id":"velocity-gm-ls-102mm-fly-by-wire-billet-aluminum-throttle-body-housing-black","title":"Velocity GM LS 102mm Fly-by-Wire Billet Aluminum Throttle Body Housing - Black","description":"\u003cp\u003eDesigned for GM LS fuel injection applications, this throttle body supports responsive airflow control, EFI signal compatibility, and clean fitment on properly matched intake setups.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBore Size \u0026amp; Airflow Control\u003c\/strong\u003e\u003cbr\u003eThe bore size is listed as 102 mm, with a Standard OE 4-Bolt Pattern bolt pattern helping match airflow capacity to the intake manifold and engine combination.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThrottle Body Construction\u003c\/strong\u003e\u003cbr\u003eBillet Aluminum construction with a natural, black, or polished finish supports clean installation and long-term throttle-body service.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSensor \/ Control Compatibility\u003c\/strong\u003e\u003cbr\u003eThis throttle body is a bare housing only and does not include throttle body electronics or actuator components. Designed to reuse factory GM LS3 drive-by-wire electronics and hardware. Confirm drive-by-wire or cable setup, connector compatibility, and calibration requirements before installation.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; Calibration Matching\u003c\/strong\u003e\u003cbr\u003eCommon use cases include Chevrolet Silverado, GMC Sierra, Chevrolet Camaro. Verify intake bore size, throttle control style, sensor configuration, and tuning requirements before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS BASED)\u003cbr\u003e• 4.8 L \/ 293 in3\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 5.7 L \/ 346 in3\u003cbr\u003e• 6.0 L \/ 364 in3\u003cbr\u003e• 6.2 L \/ 376 in3\u003cbr\u003e\u003cbr\u003eNOTE: Fits intakes with OE style LS 4-bolt pattern\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Corvette\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eInjection Style: Multi-Port\u003cbr\u003eThrottle Style: Drive By Wire\u003cbr\u003eThrottle Body Bore Size: 102 mm\u003cbr\u003eThrottle Body Bolt Pattern: Standard OE 4-Bolt Pattern\u003cbr\u003eThrottle Body Material: Billet Aluminum\u003cbr\u003eThrottle Body Finish: Natural, Black, or Polished\u003cbr\u003eVenturi Quantity: 1\u003cbr\u003eIncluded: Mounting Bolts\u003cbr\u003eIncludes Electronics: No\u003cbr\u003eElectronics Compatibility: Reuses OEM GM LS3 drive-by-wire electronics\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49903134146856,"sku":"81041BK","price":440.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81041BK_03.jpg?v=1764793713"},{"product_id":"velocity-high-flow-fuel-injectors-for-ls1-ls2-ls6-and-5-0l-coyote-100-lbs-hr","title":"Velocity High-Flow Fuel Injectors for LS1, LS2, LS6, and 5.0L Coyote, 100 lbs\/hr","description":"\u003cp\u003eConfigured for GM LS1\/LS2\/LS6 applications, this fuel injector set supports precise fuel metering, consistent cylinder-to-cylinder delivery, and EFI calibration flexibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInjector Flow \u0026amp; Fuel Metering\u003c\/strong\u003e\u003cbr\u003eFlow rate is listed at 100 lbs.\/hr.. Impedance is listed as High. Driver type is listed as 12V Saturated Circuit. These details should be matched to the ECU, fuel pressure, and engine fuel demand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlug \/ Terminal Compatibility\u003c\/strong\u003e\u003cbr\u003eInjector plug style is USCAR. Terminal details include Male gender, Blade terminal type, and 2 terminals. Connector compatibility should be verified before installation or adapter selection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInjector Body \u0026amp; O-Ring Fit\u003c\/strong\u003e\u003cbr\u003eSeat-to-seat height is 2.078 in.. Maximum outside diameter is 0.580 in.. O-ring details include manifold O-ring 0.580 in. and rail O-ring 0.551 in.. Confirm fuel rail fit, intake fit, and injector depth before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalibration \u0026amp; System Matching\u003c\/strong\u003e\u003cbr\u003eCommon use cases include Chevrolet Camaro, Pontiac Firebird, Chevrolet Corvette. Injector flow rate, plug style, impedance, and calibration must be matched to the EFI system before startup.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eFITS THE FOLLOWING TSP VELOCITY COMBINATIONS:\u003cbr\u003e• 81001 LS1\/LS2\/LS6 Intake Manifold with 81008 Fuel Rails\u003cbr\u003e• 81002 LS1\/LS2\/LS6 Intake Manifold with 81008 Fuel Rails\u003cbr\u003e• 84050 Ford 5.0L Coyote Intake Manifold with 84051 Fuel Rails\u003cbr\u003e\u003cbr\u003eNOTE: Fitment with LS1 requires conversion from EV1M to EV6F connectors (adapters included).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Tahoe\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nDriver Type: 12V Saturated Circuit\u003cbr\u003e\nFlow Rate: 100 lbs.\/hr.\u003cbr\u003e\nFuel Injection Type: Multi-port\u003cbr\u003e\nFuel Rail O-ring Outer Diameter: 0.551 in.\u003cbr\u003e\nFuel Type: Gas\u003cbr\u003e\nImpedance: High\u003cbr\u003e\nInjector Plug Style: USCAR\u003cbr\u003e\nManifold O-ring Outer Diameter: 0.580 in.\u003cbr\u003e\nMaximum Outside Diameter: 0.580 in.\u003cbr\u003e\nO-Ring Quantity: 2\u003cbr\u003e\nO-rings Included: Yes\u003cbr\u003e\nQuantity: Set of 8\u003cbr\u003e\nSeat to Seat Height: 2.078 in.\u003cbr\u003e\nTerminal Gender: Male\u003cbr\u003e\nTerminal Quantity: 2\u003cbr\u003e\nTerminal Type: Blade","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49903134277928,"sku":"81050-100","price":527.33,"currency_code":"USD","in_stock":false}]},{"product_id":"velocity-high-flow-fuel-injectors-for-ls1-ls2-ls6-and-5-0l-coyote-130-lbs-hr","title":"Velocity High-Flow Fuel Injectors for LS1, LS2, LS6, and 5.0L Coyote, 130 lbs\/hr","description":"\u003cp\u003eConfigured for GM LS1\/LS2\/LS6 applications, this fuel injector set supports precise fuel metering, consistent cylinder-to-cylinder delivery, and EFI calibration flexibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInjector Flow \u0026amp; Fuel Metering\u003c\/strong\u003e\u003cbr\u003eFlow rate is listed at 130 lbs.\/hr.. Impedance is listed as High. Driver type is listed as 12V Saturated Circuit. These details should be matched to the ECU, fuel pressure, and engine fuel demand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlug \/ Terminal Compatibility\u003c\/strong\u003e\u003cbr\u003eInjector plug style is USCAR. Terminal details include Male gender, Blade terminal type, and 2 terminals. Connector compatibility should be verified before installation or adapter selection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInjector Body \u0026amp; O-Ring Fit\u003c\/strong\u003e\u003cbr\u003eSeat-to-seat height is 2.078 in.. Maximum outside diameter is 0.580 in.. O-ring details include manifold O-ring 0.580 in. and rail O-ring 0.551 in.. Confirm fuel rail fit, intake fit, and injector depth before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalibration \u0026amp; System Matching\u003c\/strong\u003e\u003cbr\u003eCommon use cases include Chevrolet Camaro, Pontiac Firebird, Chevrolet Corvette. Injector flow rate, plug style, impedance, and calibration must be matched to the EFI system before startup.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eFITS THE FOLLOWING TSP VELOCITY COMBINATIONS:\u003cbr\u003e• 81001 LS1\/LS2\/LS6 Intake Manifold with 81008 Fuel Rails\u003cbr\u003e• 81002 LS1\/LS2\/LS6 Intake Manifold with 81008 Fuel Rails\u003cbr\u003e• 84050 Ford 5.0L Coyote Intake Manifold with 84051 Fuel Rails\u003cbr\u003e\u003cbr\u003eNOTE: Fitment with LS1 requires conversion from EV1M to EV6F connectors (adapters included).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Tahoe\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nDriver Type: 12V Saturated Circuit\u003cbr\u003e\nFlow Rate: 130 lbs.\/hr.\u003cbr\u003e\nFuel Injection Type: Multi-port\u003cbr\u003e\nFuel Rail O-ring Outer Diameter: 0.551 in.\u003cbr\u003e\nFuel Type: Gas\u003cbr\u003e\nImpedance: High\u003cbr\u003e\nInjector Plug Style: USCAR\u003cbr\u003e\nManifold O-ring Outer Diameter: 0.580 in.\u003cbr\u003e\nMaximum Outside Diameter: 0.580 in.\u003cbr\u003e\nO-Ring Quantity: 2\u003cbr\u003e\nO-rings Included: Yes\u003cbr\u003e\nQuantity: Set of 8\u003cbr\u003e\nSeat to Seat Height: 2.078 in.\u003cbr\u003e\nTerminal Gender: Male\u003cbr\u003e\nTerminal Quantity: 2\u003cbr\u003e\nTerminal Type: Blade","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49903134310696,"sku":"81050-130","price":694.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81050-130-01.jpg?v=1779909818"},{"product_id":"velocity-high-flow-fuel-injectors-for-ls1-ls2-ls6-and-5-0l-coyote-160-lbs-hr","title":"Velocity High-Flow Fuel Injectors for LS1, LS2, LS6, and 5.0L Coyote, 160 lbs\/hr","description":"\u003cp\u003eConfigured for GM LS1\/LS2\/LS6 applications, this fuel injector set supports precise fuel metering, consistent cylinder-to-cylinder delivery, and EFI calibration flexibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInjector Flow \u0026amp; Fuel Metering\u003c\/strong\u003e\u003cbr\u003eFlow rate is listed at 160 lbs.\/hr.. Impedance is listed as High. Driver type is listed as 12V Saturated Circuit. These details should be matched to the ECU, fuel pressure, and engine fuel demand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlug \/ Terminal Compatibility\u003c\/strong\u003e\u003cbr\u003eInjector plug style is USCAR. Terminal details include Male gender, Blade terminal type, and 2 terminals. Connector compatibility should be verified before installation or adapter selection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInjector Body \u0026amp; O-Ring Fit\u003c\/strong\u003e\u003cbr\u003eSeat-to-seat height is 2.078 in.. Maximum outside diameter is 0.551 in.. O-ring details include manifold O-ring 0.551 in. and rail O-ring 0.551 in.. Confirm fuel rail fit, intake fit, and injector depth before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalibration \u0026amp; System Matching\u003c\/strong\u003e\u003cbr\u003eCommon use cases include Chevrolet Camaro, Pontiac Firebird, Chevrolet Corvette. Injector flow rate, plug style, impedance, and calibration must be matched to the EFI system before startup.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eFITS THE FOLLOWING TSP VELOCITY COMBINATIONS:\u003cbr\u003e• 81001 LS1\/LS2\/LS6 Intake Manifold with 81008 Fuel Rails\u003cbr\u003e• 81002 LS1\/LS2\/LS6 Intake Manifold with 81008 Fuel Rails\u003cbr\u003e• 84050 Ford 5.0L Coyote Intake Manifold with 84051 Fuel Rails\u003cbr\u003e\u003cbr\u003eNOTE: Fitment with LS1 requires conversion from EV1M to EV6F connectors (adapters included).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Tahoe\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nDriver Type: 12V Saturated Circuit\u003cbr\u003e\nFlow Rate: 160 lbs.\/hr.\u003cbr\u003e\nFuel Injection Type: Multi-port\u003cbr\u003e\nFuel Rail O-ring Outer Diameter: 0.551 in.\u003cbr\u003e\nFuel Type: Gas\u003cbr\u003e\nImpedance: High\u003cbr\u003e\nInjector Plug Style: USCAR\u003cbr\u003e\nManifold O-ring Outer Diameter: 0.551 in.\u003cbr\u003e\nMaximum Outside Diameter: 0.551 in.\u003cbr\u003e\nO-Ring Quantity: 2\u003cbr\u003e\nO-rings Included: Yes\u003cbr\u003e\nQuantity: Set of 8\u003cbr\u003e\nSeat to Seat Height: 2.078 in.\u003cbr\u003e\nTerminal Gender: Male\u003cbr\u003e\nTerminal Quantity: 2\u003cbr\u003e\nTerminal Type: Blade","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49903134343464,"sku":"81050-160","price":816.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81050-160-01.jpg?v=1779909933"},{"product_id":"velocity-high-flow-fuel-injectors-for-ls3-and-ls7-100-lbs-hr","title":"Velocity High-Flow Fuel Injectors for LS3 and LS7, 100 lbs\/hr","description":"\u003cp\u003eConfigured for GM LS3\/L92 rectangular-port applications, this fuel injector set supports precise fuel metering, consistent cylinder-to-cylinder delivery, and EFI calibration flexibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInjector Flow \u0026amp; Fuel Metering\u003c\/strong\u003e\u003cbr\u003eFlow rate is listed at 100 lbs.\/hr.. Impedance is listed as High. Driver type is listed as 12V Saturated Circuit. These details should be matched to the ECU, fuel pressure, and engine fuel demand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlug \/ Terminal Compatibility\u003c\/strong\u003e\u003cbr\u003eInjector plug style is USCAR. Terminal details include Male gender, Blade terminal type, and 2 terminals. Connector compatibility should be verified before installation or adapter selection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInjector Body \u0026amp; O-Ring Fit\u003c\/strong\u003e\u003cbr\u003eSeat-to-seat height is 1.480 in.. Maximum outside diameter is 0.580 in.. O-ring details include manifold O-ring 0.580 in. and rail O-ring 0.551 in.. Confirm fuel rail fit, intake fit, and injector depth before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalibration \u0026amp; System Matching\u003c\/strong\u003e\u003cbr\u003eCommon use cases include Chevrolet Camaro, Chevrolet Corvette, Chevrolet Silverado. Injector flow rate, plug style, impedance, and calibration must be matched to the EFI system before startup.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eFITS THE FOLLOWING TSP VELOCITY COMBINATIONS\u003cbr\u003e• 81003 LS3 Intake Manifold with 81009 Fuel Rails\u003cbr\u003e• 81007 LS7 Intake Manifold with 81011 Fuel Rails\u003cbr\u003e\u003cbr\u003eNOTE: Will not work with stock applications\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Tahoe\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nDriver Type: 12V Saturated Circuit\u003cbr\u003e\nFlow Rate: 100 lbs.\/hr.\u003cbr\u003e\nFuel Injection Type: Multi-port\u003cbr\u003e\nFuel Rail O-ring Outer Diameter: 0.551 in.\u003cbr\u003e\nFuel Type: Gas\u003cbr\u003e\nImpedance: High\u003cbr\u003e\nInjector Plug Style: USCAR\u003cbr\u003e\nManifold O-ring Outer Diameter: 0.580 in.\u003cbr\u003e\nMaximum Outside Diameter: 0.580 in.\u003cbr\u003e\nO-Ring Quantity: 2\u003cbr\u003e\nO-rings Included: Yes\u003cbr\u003e\nQuantity: Set of 8\u003cbr\u003e\nSeat to Seat Height: 1.480 in.\u003cbr\u003e\nTerminal Gender: Male\u003cbr\u003e\nTerminal Quantity: 2\u003cbr\u003e\nTerminal Type: Blade","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49903134376232,"sku":"81051-100","price":527.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81051-100_01_d7b8ffd6-9b6b-49c1-a1d6-377009b218e6.jpg?v=1755277631"},{"product_id":"velocity-high-flow-fuel-injectors-for-ls3-and-ls7-130-lbs-hr","title":"Velocity High-Flow Fuel Injectors for LS3 and LS7, 130 lbs\/hr","description":"\u003cp\u003eConfigured for GM LS3\/L92 rectangular-port applications, this fuel injector set supports precise fuel metering, consistent cylinder-to-cylinder delivery, and EFI calibration flexibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInjector Flow \u0026amp; Fuel Metering\u003c\/strong\u003e\u003cbr\u003eFlow rate is listed at 130 lbs.\/hr.. Driver type is listed as 12V Saturated Circuit. These details should be matched to the ECU, fuel pressure, and engine fuel demand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlug \/ Terminal Compatibility\u003c\/strong\u003e\u003cbr\u003eInjector plug style is USCAR. Terminal details include Male gender, Blade terminal type, and 2 terminals. Connector compatibility should be verified before installation or adapter selection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInjector Body \u0026amp; O-Ring Fit\u003c\/strong\u003e\u003cbr\u003eSeat-to-seat height is 1.480 in.. Maximum outside diameter is 0.580 in.. O-ring details include manifold O-ring 0.580 in. and rail O-ring 0.551 in.. Confirm fuel rail fit, intake fit, and injector depth before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalibration \u0026amp; System Matching\u003c\/strong\u003e\u003cbr\u003eCommon use cases include Chevrolet Camaro, Chevrolet Corvette, Chevrolet Silverado. Injector flow rate, plug style, impedance, and calibration must be matched to the EFI system before startup.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eFITS THE FOLLOWING TSP VELOCITY COMBINATIONS\u003cbr\u003e• 81003 LS3 Intake Manifold with 81009 Fuel Rails\u003cbr\u003e• 81007 LS7 Intake Manifold with 81011 Fuel Rails\u003cbr\u003e\u003cbr\u003eNOTE: Will not work with stock applications\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Tahoe\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nDriver Type: 12V Saturated Circuit\u003cbr\u003e\nFlow Rate: 130 lbs.\/hr.\u003cbr\u003e\nFuel Injection Type: Multi-port\u003cbr\u003e\nFuel Rail O-ring Outer Diameter: 0.551 in.\u003cbr\u003e\nFuel Type: Gas\u003cbr\u003e\nInjector Plug Style: USCAR\u003cbr\u003e\nManifold O-ring Outer Diameter: 0.580 in.\u003cbr\u003e\nMaximum Outside Diameter: 0.580 in.\u003cbr\u003e\nO-Ring Quantity: 2\u003cbr\u003e\nO-rings Included: Yes\u003cbr\u003e\nQuantity: Set of 8\u003cbr\u003e\nSeat to Seat Height: 1.480 in.\u003cbr\u003e\nTerminal Gender: Male\u003cbr\u003e\nTerminal Quantity: 2\u003cbr\u003e\nTerminal Type: Blade","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49903134409000,"sku":"81051-130","price":694.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81051-130-01.jpg?v=1779910420"},{"product_id":"velocity-high-flow-fuel-injectors-for-ls3-and-ls7-160-lbs-hr","title":"Velocity High-Flow Fuel Injectors for LS3 and LS7, 160 lbs\/hr","description":"\u003cp\u003eConfigured for GM LS3\/L92 rectangular-port applications, this fuel injector set supports precise fuel metering, consistent cylinder-to-cylinder delivery, and EFI calibration flexibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInjector Flow \u0026amp; Fuel Metering\u003c\/strong\u003e\u003cbr\u003eFlow rate is listed at 160 lbs.\/hr.. Driver type is listed as 12V Saturated Circuit. These details should be matched to the ECU, fuel pressure, and engine fuel demand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlug \/ Terminal Compatibility\u003c\/strong\u003e\u003cbr\u003eInjector plug style is USCAR. Terminal details include Male gender, Blade terminal type, and 2 terminals. Connector compatibility should be verified before installation or adapter selection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInjector Body \u0026amp; O-Ring Fit\u003c\/strong\u003e\u003cbr\u003eSeat-to-seat height is 1.480 in.. Maximum outside diameter is 0.580 in.. O-ring details include manifold O-ring 0.580 in. and rail O-ring 0.551 in.. Confirm fuel rail fit, intake fit, and injector depth before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalibration \u0026amp; System Matching\u003c\/strong\u003e\u003cbr\u003eCommon use cases include Chevrolet Camaro, Chevrolet Corvette, Chevrolet Silverado. Injector flow rate, plug style, impedance, and calibration must be matched to the EFI system before startup.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eFITS THE FOLLOWING TSP VELOCITY COMBINATIONS\u003cbr\u003e• 81003 LS3 Intake Manifold with 81009 Fuel Rails\u003cbr\u003e• 81007 LS7 Intake Manifold with 81011 Fuel Rails\u003cbr\u003e\u003cbr\u003eNOTE: Will not work with stock applications\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Tahoe\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nDriver Type: 12V Saturated Circuit\u003cbr\u003e\nFlow Rate: 160 lbs.\/hr.\u003cbr\u003e\nFuel Injection Type: Multi-port\u003cbr\u003e\nFuel Rail O-ring Outer Diameter: 0.551 in.\u003cbr\u003e\nFuel Type: Gas\u003cbr\u003e\nInjector Plug Style: USCAR\u003cbr\u003e\nManifold O-ring Outer Diameter: 0.580 in.\u003cbr\u003e\nMaximum Outside Diameter: 0.580 in.\u003cbr\u003e\nO-Ring Quantity: 2\u003cbr\u003e\nO-rings Included: Yes\u003cbr\u003e\nQuantity: Set of 8\u003cbr\u003e\nSeat to Seat Height: 1.480 in.\u003cbr\u003e\nTerminal Gender: Male\u003cbr\u003e\nTerminal Quantity: 2\u003cbr\u003e\nTerminal Type: Blade","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49903134441768,"sku":"81051-160","price":816.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81051-160-01.jpg?v=1779910564"},{"product_id":"universal-gm-ls-and-lt-swap-cold-air-intake-kit","title":"Universal GM LS and LT Swap Cold Air Intake Kit","description":"\u003cp\u003eBuilt for upgraded induction performance, this intake manifold supports improved airflow characteristics and stable fuel delivery for GM LS Series applications using properly matched carburetor or EFI configurations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS BASED)\u003cbr\u003e• 4.8 L \/ 293 in3\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 5.7 L \/ 346 in3\u003cbr\u003e• 6.0 L \/ 364 in3\u003cbr\u003e• 6.2 L \/ 376 in3\"\n\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Corvette\u003cbr\u003eChevrolet Tahoe\u003cbr\u003eCTS-V\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nAir Filter Type: Oiled\u003cbr\u003e\nTub Color: Black\u003cbr\u003e\nFilter Color: Red\u003cbr\u003e\nAir Filter Material: Cotton Gauze","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49903136473384,"sku":"81091","price":259.71,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81091-01.jpg?v=1770330951"},{"product_id":"gm-ls-104mm-cast-aluminum-throttle-body-elbow-with-4150-flange-satin","title":"GM LS 104mm Cast Aluminum Throttle Body Elbow with 4150 Flange - Satin","description":"\u003cp\u003eDesigned for GM LS fuel injection applications, this throttle body elbow helps adapt EFI throttle body placement to 4150-style intake layouts while supporting clean airflow routing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThrottle Body Adapter Fitment\u003c\/strong\u003e\u003cbr\u003eMain port inside diameter is 104 mm. Intake manifold flange style is 4150 Square Bore. Height is listed as 5.120 in.. These dimensions should be checked against hood clearance and throttle body placement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eElbow Construction \u0026amp; Layout\u003c\/strong\u003e\u003cbr\u003eAluminum construction with a satin finish and throttle cable bracket included: Yes. The elbow helps create a clean transition between intake manifold and throttle body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSensor \/ Port Provisions\u003c\/strong\u003e\u003cbr\u003eMAP sensor port included: Yes. Vacuum ports included: Performance. Nitrous port provision: Yes mm. Plan sensor placement, vacuum routing, and accessory clearance before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; Clearance Matching\u003c\/strong\u003e\u003cbr\u003eCommon use cases include Chevrolet Silverado, GMC Sierra, Chevrolet Camaro. Verify throttle body size, 4150 flange compatibility, cable bracket needs, and hood clearance before final assembly.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS BASED)\u003cbr\u003e• 4.8 L \/ 293 in3\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 5.7 L \/ 346 in3\u003cbr\u003e• 6.0 L \/ 364 in3\u003cbr\u003e• 6.2 L \/ 376 in3\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTES:\u003c\/b\u003e\u003cbr\u003e• Fits intake with Holley 4150 carburetor flange\u003cbr\u003e• 105 mm throttle body opening with stock 4-bolt pattern\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Corvette\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nColor: Satin\u003cbr\u003e\nFuel System Type: Electronic Fuel Injection\u003cbr\u003e\nGasket Or Seal Included: No\u003cbr\u003e\nGrade Type: Performance\u003cbr\u003e\nHeight: 5.120 in.\u003cbr\u003e\nIntake Manifold Flange Style: 4150 Square Bore\u003cbr\u003e\nMain Port Inside Diameter: 104 mm\u003cbr\u003e\nManifold Absolute Pressure Sensor Port Included: Yes\u003cbr\u003e\nMaterial: Aluminum\u003cbr\u003e\nMeth Injection\/Boost Reference Port Thread Size: (2) 0.125 in. NPT\u003cbr\u003e\nMeth Injection\/Boost Reference Ports Included: Yes\u003cbr\u003e\nMounting Hardware Included: Yes in.\u003cbr\u003e\nMounting Hole Quantity: 4\u003cbr\u003e\nNitrous Port Included: Yes mm\u003cbr\u003e\nNitrous Port Thread Size: 0.0625 in. NPT\u003cbr\u003e\nPort Plugs Included: Yes\u003cbr\u003e\nPort Quantity: 1\u003cbr\u003e\nQuantity: Sold individually\u003cbr\u003e\nThrottle Body Bore Size: 104 mm\u003cbr\u003e\nThrottle Cable Bracket Included: Yes\u003cbr\u003e\nVacuum Port Thread Sizes: (1) 0.375, (2) 0.250 in. NPT\u003cbr\u003e\nVacuum Ports Included: Performance","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49903136669992,"sku":"81141","price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81141_01.jpg?v=1751298856"},{"product_id":"gm-ls-104mm-cast-aluminum-throttle-body-elbow-with-4150-flange-black","title":"GM LS 104mm Cast Aluminum Throttle Body Elbow with 4150 Flange - Black","description":"\u003cp\u003eDesigned for GM LS fuel injection applications, this throttle body elbow helps adapt EFI throttle body placement to 4150-style intake layouts while supporting clean airflow routing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThrottle Body Adapter Fitment\u003c\/strong\u003e\u003cbr\u003eMain port inside diameter is 104 mm. Intake manifold flange style is 4150 Square Bore. Height is listed as 5.120 in.. These dimensions should be checked against hood clearance and throttle body placement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eElbow Construction \u0026amp; Layout\u003c\/strong\u003e\u003cbr\u003eAluminum construction with a black finish and throttle cable bracket included: Yes. The elbow helps create a clean transition between intake manifold and throttle body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSensor \/ Port Provisions\u003c\/strong\u003e\u003cbr\u003eMAP sensor port included: Yes. Vacuum ports included: Performance. Nitrous port provision: Yes mm. Plan sensor placement, vacuum routing, and accessory clearance before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; Clearance Matching\u003c\/strong\u003e\u003cbr\u003eCommon use cases include Chevrolet Silverado, GMC Sierra, Chevrolet Camaro. Verify throttle body size, 4150 flange compatibility, cable bracket needs, and hood clearance before final assembly.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS BASED)\u003cbr\u003e• 4.8 L \/ 293 in3\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 5.7 L \/ 346 in3\u003cbr\u003e• 6.0 L \/ 364 in3\u003cbr\u003e• 6.2 L \/ 376 in3\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTES:\u003c\/b\u003e\u003cbr\u003e• Fits intake with Holley 4150 carburetor flange\u003cbr\u003e• 105 mm throttle body opening with stock 4-bolt pattern\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Corvette\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nColor: Black\u003cbr\u003e\nFuel System Type: Electronic Fuel Injection\u003cbr\u003e\nGasket Or Seal Included: No\u003cbr\u003e\nGrade Type: Performance\u003cbr\u003e\nHeight: 5.120 in.\u003cbr\u003e\nIntake Manifold Flange Style: 4150 Square Bore\u003cbr\u003e\nMain Port Inside Diameter: 104 mm\u003cbr\u003e\nManifold Absolute Pressure Sensor Port Included: Yes\u003cbr\u003e\nMaterial: Aluminum\u003cbr\u003e\nMeth Injection\/Boost Reference Port Thread Size: (2) 0.125 in. NPT\u003cbr\u003e\nMeth Injection\/Boost Reference Ports Included: Yes\u003cbr\u003e\nMounting Hardware Included: Yes in.\u003cbr\u003e\nMounting Hole Quantity: 4\u003cbr\u003e\nNitrous Port Included: Yes mm\u003cbr\u003e\nNitrous Port Thread Size: 0.0625 in. NPT\u003cbr\u003e\nPort Plugs Included: Yes\u003cbr\u003e\nPort Quantity: 1\u003cbr\u003e\nQuantity: Sold individually\u003cbr\u003e\nThrottle Body Bore Size: 104 mm\u003cbr\u003e\nThrottle Cable Bracket Included: Yes\u003cbr\u003e\nVacuum Port Thread Sizes: (1) 0.375, (2) 0.250 in. NPT\u003cbr\u003e\nVacuum Ports Included: Performance","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49903136702760,"sku":"81141BK","price":178.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81141BK-01.jpg?v=1751296679"},{"product_id":"gm-ls-104mm-cast-aluminum-throttle-body-elbow-with-4150-flange-polished","title":"GM LS 104mm Cast Aluminum Throttle Body Elbow with 4150 Flange - Polished","description":"\u003cp\u003eDesigned for GM LS fuel injection applications, this throttle body elbow helps adapt EFI throttle body placement to 4150-style intake layouts while supporting clean airflow routing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThrottle Body Adapter Fitment\u003c\/strong\u003e\u003cbr\u003eMain port inside diameter is 104 mm. Intake manifold flange style is 4150 Square Bore. Height is listed as 5.120 in.. These dimensions should be checked against hood clearance and throttle body placement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eElbow Construction \u0026amp; Layout\u003c\/strong\u003e\u003cbr\u003eAluminum construction with a polished finish and throttle cable bracket included: Yes. The elbow helps create a clean transition between intake manifold and throttle body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSensor \/ Port Provisions\u003c\/strong\u003e\u003cbr\u003eMAP sensor port included: Yes. Vacuum ports included: Performance. Nitrous port provision: Yes mm. Plan sensor placement, vacuum routing, and accessory clearance before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; Clearance Matching\u003c\/strong\u003e\u003cbr\u003eCommon use cases include Chevrolet Silverado, GMC Sierra, Chevrolet Camaro. Verify throttle body size, 4150 flange compatibility, cable bracket needs, and hood clearance before final assembly.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS BASED)\u003cbr\u003e• 4.8 L \/ 293 in3\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 5.7 L \/ 346 in3\u003cbr\u003e• 6.0 L \/ 364 in3\u003cbr\u003e• 6.2 L \/ 376 in3\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTES:\u003c\/b\u003e\u003cbr\u003e• Fits intake with Holley 4150 carburetor flange\u003cbr\u003e• 105 mm throttle body opening with stock 4-bolt pattern\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Corvette\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nColor: Polished\u003cbr\u003e\nFuel System Type: Electronic Fuel Injection\u003cbr\u003e\nGasket Or Seal Included: No\u003cbr\u003e\nGrade Type: Performance\u003cbr\u003e\nHeight: 5.120 in.\u003cbr\u003e\nIntake Manifold Flange Style: 4150 Square Bore\u003cbr\u003e\nMain Port Inside Diameter: 104 mm\u003cbr\u003e\nManifold Absolute Pressure Sensor Port Included: Yes\u003cbr\u003e\nMaterial: Aluminum\u003cbr\u003e\nMeth Injection\/Boost Reference Port Thread Size: (2) 0.125 in. NPT\u003cbr\u003e\nMeth Injection\/Boost Reference Ports Included: Yes\u003cbr\u003e\nMounting Hardware Included: Yes in.\u003cbr\u003e\nMounting Hole Quantity: 4\u003cbr\u003e\nNitrous Port Included: Yes mm\u003cbr\u003e\nNitrous Port Thread Size: 0.0625 in. NPT\u003cbr\u003e\nPort Plugs Included: Yes\u003cbr\u003e\nPort Quantity: 1\u003cbr\u003e\nQuantity: Sold individually\u003cbr\u003e\nQuantity: Sold individually\u003cbr\u003e\nThrottle Body Bore Size: 104 mm\u003cbr\u003e\nThrottle Cable Bracket Included: Yes\u003cbr\u003e\nVacuum Port Thread Sizes: (1) 0.375, (2) 0.250 in. NPT\u003cbr\u003e\nVacuum Ports Included: Performance","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49903136735528,"sku":"81141P","price":192.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81141P_01.jpg?v=1761241888"},{"product_id":"v-series-gm-ls-105-mm-billet-aluminum-throttle-body-elbow-with-4150-flange-natural","title":"V Series GM LS 105 mm Billet Aluminum Throttle Body Elbow with 4150 Flange - Natural","description":"\u003cp\u003eDesigned for GM LS fuel injection applications, this throttle body elbow helps adapt EFI throttle body placement to 4150-style intake layouts while supporting clean airflow routing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThrottle Body Adapter Fitment\u003c\/strong\u003e\u003cbr\u003eMain port inside diameter is 105 mm. Intake manifold flange style is 4150 Square Bore. Height is listed as 5.120 in.. These dimensions should be checked against hood clearance and throttle body placement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eElbow Construction \u0026amp; Layout\u003c\/strong\u003e\u003cbr\u003eAluminum construction with a natural finish and throttle cable bracket included: Yes. The elbow helps create a clean transition between intake manifold and throttle body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSensor \/ Port Provisions\u003c\/strong\u003e\u003cbr\u003eMAP sensor port included: Yes. Vacuum ports included: Performance. Nitrous port provision: Yes mm. Plan sensor placement, vacuum routing, and accessory clearance before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; Clearance Matching\u003c\/strong\u003e\u003cbr\u003eCommon use cases include Chevrolet Silverado, GMC Sierra, Chevrolet Camaro. Verify throttle body size, 4150 flange compatibility, cable bracket needs, and hood clearance before final assembly.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS BASED)\u003cbr\u003e• 4.8 L \/ 293 in3\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 5.7 L \/ 346 in3\u003cbr\u003e• 6.0 L \/ 364 in3\u003cbr\u003e• 6.2 L \/ 376 in3\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTES:\u003c\/b\u003e\u003cbr\u003e• Fits intake with Holley 4150 carburetor flange\u003cbr\u003e• 105 mm throttle body opening with stock 4-bolt pattern\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Corvette\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nColor: Natural\u003cbr\u003e\nFuel System Type: Electronic Fuel Injection\u003cbr\u003e\nGasket Or Seal Included: No\u003cbr\u003e\nGrade Type: Performance\u003cbr\u003e\nHeight: 5.120 in.\u003cbr\u003e\nIntake Manifold Flange Style: 4150 Square Bore\u003cbr\u003e\nMain Port Inside Diameter: 105 mm\u003cbr\u003e\nManifold Absolute Pressure Sensor Port Included: Yes\u003cbr\u003e\nMaterial: Aluminum\u003cbr\u003e\nMeth Injection\/Boost Reference Port Thread Size: (2) 0.125 in. NPT\u003cbr\u003e\nMeth Injection\/Boost Reference Ports Included: Yes\u003cbr\u003e\nMounting Hardware Included: Yes in.\u003cbr\u003e\nMounting Hole Quantity: 4\u003cbr\u003e\nNitrous Port Included: Yes mm\u003cbr\u003e\nNitrous Port Thread Size: 0.0625 in. NPT\u003cbr\u003e\nPort Plugs Included: Yes\u003cbr\u003e\nPort Quantity: 1\u003cbr\u003e\nQuantity: Sold individually\u003cbr\u003e\nQuantity: Sold individually\u003cbr\u003e\nThrottle Body Bore Size: 105 mm\u003cbr\u003e\nThrottle Cable Bracket Included: Yes\u003cbr\u003e\nVacuum Port Thread Sizes: (1) 0.375, (2) 0.250 in. NPT\u003cbr\u003e\nVacuum Ports Included: Performance","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49903136768296,"sku":"81142","price":506.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81142_01.jpg?v=1765234623"},{"product_id":"v-series-gm-ls-105-mm-billet-aluminum-throttle-body-elbow-with-4150-flange-black","title":"V Series GM LS 105 mm Billet Aluminum Throttle Body Elbow with 4150 Flange - Black","description":"\u003cp\u003eDesigned for GM LS fuel injection applications, this throttle body elbow helps adapt EFI throttle body placement to 4150-style intake layouts while supporting clean airflow routing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThrottle Body Adapter Fitment\u003c\/strong\u003e\u003cbr\u003eMain port inside diameter is 105 mm. Intake manifold flange style is 4150 Square Bore. Height is listed as 5.120 in.. These dimensions should be checked against hood clearance and throttle body placement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eElbow Construction \u0026amp; Layout\u003c\/strong\u003e\u003cbr\u003eAluminum construction with a black finish and throttle cable bracket included: Yes. The elbow helps create a clean transition between intake manifold and throttle body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSensor \/ Port Provisions\u003c\/strong\u003e\u003cbr\u003eMAP sensor port included: Yes. Vacuum ports included: Performance. Nitrous port provision: Yes mm. Plan sensor placement, vacuum routing, and accessory clearance before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; Clearance Matching\u003c\/strong\u003e\u003cbr\u003eCommon use cases include Chevrolet Silverado, GMC Sierra, Chevrolet Camaro. Verify throttle body size, 4150 flange compatibility, cable bracket needs, and hood clearance before final assembly.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS BASED)\u003cbr\u003e• 4.8 L \/ 293 in3\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 5.7 L \/ 346 in3\u003cbr\u003e• 6.0 L \/ 364 in3\u003cbr\u003e• 6.2 L \/ 376 in3\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTES:\u003c\/b\u003e\u003cbr\u003e• Fits intake with Holley 4150 carburetor flange\u003cbr\u003e• 105 mm throttle body opening with stock 4-bolt pattern\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Corvette\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nColor: Black\u003cbr\u003e\nFuel System Type: Electronic Fuel Injection\u003cbr\u003e\nGasket Or Seal Included: No\u003cbr\u003e\nGrade Type: Performance\u003cbr\u003e\nHeight: 5.120 in.\u003cbr\u003e\nIntake Manifold Flange Style: 4150 Square Bore\u003cbr\u003e\nMain Port Inside Diameter: 105 mm\u003cbr\u003e\nManifold Absolute Pressure Sensor Port Included: Yes\u003cbr\u003e\nMaterial: Aluminum\u003cbr\u003e\nMeth Injection\/Boost Reference Port Thread Size: (2) 0.125 in. NPT\u003cbr\u003e\nMeth Injection\/Boost Reference Ports Included: Yes\u003cbr\u003e\nMounting Hardware Included: Yes in.\u003cbr\u003e\nMounting Hole Quantity: 4\u003cbr\u003e\nNitrous Port Included: Yes mm\u003cbr\u003e\nNitrous Port Thread Size: 0.0625 in. NPT\u003cbr\u003e\nPort Plugs Included: Yes\u003cbr\u003e\nPort Quantity: 1\u003cbr\u003e\nQuantity: Sold individually\u003cbr\u003e\nQuantity: Sold individually\u003cbr\u003e\nThrottle Body Bore Size: 105 mm\u003cbr\u003e\nThrottle Cable Bracket Included: Yes\u003cbr\u003e\nVacuum Port Thread Sizes: (1) 0.375, (2) 0.250 in. NPT\u003cbr\u003e\nVacuum Ports Included: Performance","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49903136801064,"sku":"81142BK","price":633.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81142BK_01.jpg?v=1765234768"},{"product_id":"velocity-ls7-intake-manifold-o-ring-gaskets-and-mounting-bolts","title":"Velocity LS7 Intake Manifold O-Ring Gaskets and Mounting Bolts","description":"\u003cp\u003eThis kit includes the port seals and hardware necessary to mount your rectangle-port LS7 TSP Velocity intake manifold. The included hardware is matched to the intended component style to support a clean, secure installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible With\u003c\/strong\u003e\u003cbr\u003eTSP Velocity LS-based engines with rectangle LS7 intake port shape only (81007)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCommon Vehicle Applications\u003c\/strong\u003e\u003cbr\u003e• LS3, L92, and LS7-style rectangular-port intake manifold combinations\u003cbr\u003e• Rectangular-port GM LS engine swaps using TSP Velocity intake components\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eIntake Port O-rings Included:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eIntake Port Shape:\u003c\/strong\u003e Raised Rectangle\u003cbr\u003e\u003cstrong\u003eMounting Hardware Included:\u003c\/strong\u003e Yes\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49903140733224,"sku":"81707","price":19.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81707_01.jpg?v=1741619766"},{"product_id":"velocity-ls7-intake-fuel-rail-hardware-kit","title":"Velocity LS7 Intake Fuel Rail Hardware Kit","description":"\u003cp\u003eConfigured for GM LS7 rectangular-port applications, this fuel injector set supports precise fuel metering, consistent cylinder-to-cylinder delivery, and EFI calibration flexibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInjector Flow \u0026amp; Fuel Metering\u003c\/strong\u003e\u003cbr\u003eThese details should be matched to the ECU, fuel pressure, and engine fuel demand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlug \/ Terminal Compatibility\u003c\/strong\u003e\u003cbr\u003eConnector compatibility should be verified before installation or adapter selection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInjector Body \u0026amp; O-Ring Fit\u003c\/strong\u003e\u003cbr\u003eConfirm fuel rail fit, intake fit, and injector depth before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalibration \u0026amp; System Matching\u003c\/strong\u003e\u003cbr\u003eCommon use cases include Chevrolet Corvette, Chevrolet Camaro, custom LS7-powered builds. Injector flow rate, plug style, impedance, and calibration must be matched to the EFI system before startup.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eFits TSP Velocity rectangle port LS7 intake and fuel rails (81007 and 81011)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Tahoe\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nFuel Rail Brackets Included: Yes\u003cbr\u003e\nIntake Manifold Style: TSP Raised Rectangle Port\u003cbr\u003e\nMounting Hardware Included: Yes","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49903140765992,"sku":"81711","price":17.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81711_01.jpg?v=1758554212"},{"product_id":"gm-ls-cathedral-port-v-series-billet-aluminum-low-rise-intake-manifold-black","title":"GM LS Cathedral Port V Series Billet Aluminum Low-Rise Intake Manifold - Black","description":"\u003cp\u003e\u003cspan\u003eUpgrade your LS-powered build with the Top Street Performance GM LS Cathedral Port V Series Billet Aluminum Low-Rise Intake Manifold. Designed for GM Gen III cathedral-port LS engines, this LS billet intake manifold combines premium T-6061 billet aluminum construction, exceptional airflow capability, and a modular design that supports high-performance street, race, and LS swap applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFresh off its award-winning appearance at the 2024 SEMA Show, the V Series intake manifold was engineered to improve airflow efficiency, enhance throttle response, and deliver the performance potential serious LS enthusiasts demand. The low-rise design provides improved hood clearance for many LS swap, street performance, and restomod applications while maintaining the airflow needed for high-horsepower engine combinations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eManufactured from T-6061 billet aluminum, this LS cathedral port intake manifold offers exceptional durability, premium appearance, and precise machining throughout. The modular design simplifies installation, maintenance, and future upgrades, while included custom V Series fuel rails help create a clean, professional engine bay appearance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhether you're upgrading an LS1 intake manifold, building a turbocharged 5.3 LS, improving airflow on a 6.0 LS combination, or completing a custom LS swap, this billet aluminum LS intake manifold provides the airflow capacity, serviceability, and performance-focused design needed for serious street and competition builds.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBillet Aluminum Intake Manifold Technology\u003c\/strong\u003e\u003cbr\u003eThe Top Street Performance V Series Intake Manifold is manufactured from premium T-6061 billet aluminum and engineered specifically for GM Gen III cathedral-port LS engines. Precision-machined construction provides exceptional strength, durability, and appearance while creating a premium engine bay upgrade for street and racing applications. The modular design simplifies installation, maintenance, and future modifications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerformance Benefits\u003c\/strong\u003e\u003cbr\u003eThe runner design is engineered to improve airflow efficiency and support increased engine performance across a broad RPM range. Combined with a low-rise configuration, this intake manifold delivers excellent airflow capability while helping maintain hood clearance in many LS swap and performance vehicle applications. The multi-port EFI design supports naturally aspirated and boosted engine combinations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eGM Gen III Cathedral Port LS Engines\u003cbr\u003e• 4.8 L \/ 293 in3\u003cbr\u003e• 5.3 L \/ 325 in3\u003cbr\u003e• 5.7 L \/ 346 in3\u003cbr\u003e• 6.0 L \/ 364 in3\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003e• Chevrolet Camaro LS swaps\u003cbr\u003e• Chevrolet Corvette LS1 \u0026amp; LS6 applications\u003cbr\u003e• Chevrolet Silverado LS builds\u003cbr\u003e• Chevrolet C10 LS conversions\u003cbr\u003e• Chevrolet Chevelle LS swaps\u003cbr\u003e• Pontiac GTO LS projects\u003cbr\u003e• Custom street rods and restomods\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003e• Fits GM Gen III cathedral-port LS cylinder heads\u003cbr\u003e• Designed for electronic fuel injection (EFI) applications\u003cbr\u003e• Includes custom V Series fuel rails\u003cbr\u003e• Features Gen IV 3-bar MAP sensor provision\u003cbr\u003e• Uses EV1-style injector provisions\u003cbr\u003e• Billet aluminum construction with black finish\u003cbr\u003e• Low-rise design helps improve hood clearance in many applications\u003cbr\u003e• Verify throttle body, fuel system, injector, and hood clearance before installation\u003cbr\u003e• Not compatible with rectangle-port LS cylinder heads\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eBasic Operating RPM Range: 1,500-9,000 RPM\u003cbr\u003eCenter Maximum Height: 8.750 in.\u003cbr\u003eColor: Silver\u003cbr\u003eDeck Height: Standard\u003cbr\u003eEGR Port: Yes\u003cbr\u003eFront Maximum Height: 8.286 in.\u003cbr\u003eFuel Injection Style: Multi-port Fuel Injection\u003cbr\u003eFuel Injector Stye Provision: EV1\u003cbr\u003eFuel Rail Color: Silver\u003cbr\u003eFuel Rail Finish: Black\u003cbr\u003eFuel Rail Fitting Thread Diameter: -10 AN\u003cbr\u003eFuel Rail Material: Aluminum\u003cbr\u003eFuel Rails Included: Yes\u003cbr\u003eFuel System Type: Electronic Fuel Injection\u003cbr\u003eGasket Or Seal Included: Yes\u003cbr\u003eGrade Type: Performance\u003cbr\u003eIntake Port Shape: Cathedral\u003cbr\u003eManifold Absolute Pressure Sensor Port Included: Yes\u003cbr\u003eManifold Absolute Pressure Sensor Port Style: Gen IV 3-bar\u003cbr\u003eManifold Finish: Natural\u003cbr\u003eMaterial: Aluminum\u003cbr\u003eMounting Hardware Included: Yes\u003cbr\u003eMounting Hole Quantity: 10\u003cbr\u003ePlenum Thickness: 8 mm\u003cbr\u003eRear Maximum Height: 7.132 in.\u003cbr\u003eRemovable Runners: Yes\u003cbr\u003eRemovable Throttle Body Flange: Yes\u003cbr\u003eRemovable Top: Yes\u003cbr\u003eRunner Length: 3.000 in.\u003cbr\u003eSingle Or Dual Plane Type: Single Plane\u003cbr\u003eSupplemental Boss Quantity: 2\u003cbr\u003eThrottle Body Bore Size: 102.200 mm\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49969948983592,"sku":"81406BK","price":4395.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81406BK_01.jpg?v=1758131034"},{"product_id":"gm-ls-102mm-aluminum-intake-manifold-black","title":"GM LS 102mm Aluminum Intake Manifold - Black","description":"\u003cp\u003eUpgrade your LS-powered build with the Top Street Performance GM LS 102mm Aluminum Intake Manifold. Designed for GM LS cathedral-port engines, this fabricated aluminum intake manifold delivers increased airflow capacity, improved throttle response, and enhanced high-RPM performance for street performance, drag racing, LS swap, and boosted engine applications.\u003c\/p\u003e\n\u003cp\u003eEngineered around a large 102mm throttle body opening, this LS intake manifold is designed to maximize airflow for high-output engine combinations. The fabricated aluminum construction features a large center plenum, short runners, and velocity stack runner entries that help improve airflow efficiency and cylinder distribution compared to many stock-style intake manifolds. \u003cspan class=\"\" data-state=\"closed\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eConstructed from TIG-welded T-6061 aluminum, this LS fabricated intake manifold provides exceptional durability while maintaining a lightweight design. Individual port O-rings help ensure a reliable seal at each intake runner and throttle body opening, while the black finish provides corrosion resistance and a clean performance appearance. \u003cspan class=\"\" data-state=\"closed\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWhether you're upgrading a 5.3 LS intake manifold, building a high-performance 6.0 LS combination, completing a turbocharged LS project, or looking for a 102mm intake manifold capable of supporting serious horsepower, this LS aluminum intake manifold delivers the airflow and performance potential demanded by performance enthusiasts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFabricated Aluminum Intake Manifold Technology\u003c\/strong\u003e\u003cbr\u003eThe Top Street Performance LS 102mm Intake Manifold is engineered for enthusiasts seeking increased airflow and improved engine performance. Manufactured from TIG-welded T-6061 aluminum, this fabricated intake manifold utilizes a large center plenum, short runners, and velocity stack runner entries to help maximize airflow throughout the operating range. Individual port O-rings provide a secure seal while the black finish offers durability and corrosion resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerformance Benefits\u003c\/strong\u003e\u003cbr\u003eDesigned for performance-oriented LS engine combinations, the single-plane intake design and 102mm throttle body opening support increased airflow demand for naturally aspirated and boosted applications. The runner and plenum design help provide balanced airflow distribution while supporting strong throttle response and high-RPM performance. Designed for a 1,500-6,500 RPM operating range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eGM LS Cathedral Port Engines\u003cbr\u003e• 4.8 L \/ 293 in3 (LR4)\u003cbr\u003e• 5.3 L \/ 325 in3 (L33, L59, LM4, LM7)\u003cbr\u003e• 5.7 L \/ 346 in3 (LS1, LS6)\u003cbr\u003e• 6.0 L \/ 364 in3 (LQ4, LQ9, LS2)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003e• Chevrolet Silverado\u003cbr\u003e• GMC Sierra\u003cbr\u003e• Chevrolet Camaro\u003cbr\u003e• Chevrolet Corvette\u003cbr\u003e• Chevrolet Tahoe\u003cbr\u003e• CTS-V\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003e• Fits LS-based engines with cathedral-port intake ports only\u003cbr\u003e• Designed for electronic fuel injection applications\u003cbr\u003e• 102mm throttle body opening\u003cbr\u003e• Multi-port EFI configuration\u003cbr\u003e• EV1 injector provisions\u003cbr\u003e• LSA\/LS9-style MAP sensor bung (GM #12592525)\u003cbr\u003e• Individual intake runner O-ring seals\u003cbr\u003e• Verify hood clearance, fuel system compatibility, throttle body compatibility, and accessory clearance before installation\u003cbr\u003e• Not compatible with rectangle-port LS cylinder heads\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eBasic Operating RPM Range: 1,500-6,500 RPM\u003cbr\u003eCenter Maximum Height: 6.750 in.\u003cbr\u003eColor: Clear Anodized\u003cbr\u003eDeck Height: Standard\u003cbr\u003eFinish: Black\u003cbr\u003eFront Maximum Height: 6.750 in.\u003cbr\u003eFuel Injection Style: Multi-port\u003cbr\u003eFuel Injector Stye Provision: EV1\u003cbr\u003eGasket Or Seal Included: Yes\u003cbr\u003eGrade Type: Performance\u003cbr\u003eIntake Port Shape: Cathedral\u003cbr\u003eMaterial: Aluminum\u003cbr\u003ePlenum Material: Aluminum\u003cbr\u003ePlenum Thickness: 4 mm\u003cbr\u003eRear Maximum Height: 6.750 in.\u003cbr\u003eRunner Length: 5.000 in.\u003cbr\u003eSupplemental Boss Quantity: 4\u003cbr\u003eThrottle Body Bore Size: 102 mm\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49970000167208,"sku":"81001BK","price":679.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81001BK-05.jpg?v=1779910804"},{"product_id":"velocity-102-mm-4-bolt-ls-throttle-body-black","title":"Velocity 102 mm 4-Bolt LS Throttle Body - Black","description":"\u003cp\u003eDesigned for GM LS fuel injection applications, this throttle body supports responsive airflow control, EFI signal compatibility, and clean fitment on properly matched intake setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBore Size \u0026amp; Airflow Control\u003c\/strong\u003e\u003cbr\u003eThe bore size is listed as 102 mm, with a Factory Style 4-Bolt Pattern bolt pattern helping match airflow capacity to the intake manifold and engine combination. Fuel system type is listed as Electronic Fuel Injection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThrottle Body Construction\u003c\/strong\u003e\u003cbr\u003eAluminum construction with a black finish and gasket inclusion listed as No supports clean installation and long-term throttle-body service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSensor \/ Control Compatibility\u003c\/strong\u003e\u003cbr\u003eThrottle position sensor included: No. Idle air control motor included: No. Confirm drive-by-wire or cable setup, connector compatibility, and calibration requirements before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; Calibration Matching\u003c\/strong\u003e\u003cbr\u003eCommon use cases include Chevrolet Silverado, GMC Sierra, Chevrolet Camaro. Verify intake bore size, throttle control style, sensor configuration, and tuning requirements before installation.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003e102MM LSX TSP FABRICATED INTAKE MANIFOLDS\u003cbr\u003e• 81001\u003cbr\u003e• 81002\u003cbr\u003e• 81003\u003cbr\u003e• 81007\u003cbr\u003eNOTE: Will not fit 92mm intake manifolds\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Corvette\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nBore Diameter: 102 mm\u003cbr\u003e\nFuel Injectors Included: No\u003cbr\u003e\nFuel System Grade: Regular\u003cbr\u003e\nFuel System Injection Type: Multi-port\u003cbr\u003e\nFuel System Type: Electronic Fuel Injection\u003cbr\u003e\nGasket Or Seal Included: No\u003cbr\u003e\nIdle Air Control Motor Included: No\u003cbr\u003e\nIdle Air Control Motor Style: GM #17113598\u003cbr\u003e\nMounting Hardware Included: Yes\u003cbr\u003e\nThrottle Body Bolt Pattern: Factory Style 4-Bolt Pattern\u003cbr\u003e\nThrottle Body Finish: Black\u003cbr\u003e\nThrottle Body Material: Aluminum\u003cbr\u003e\nThrottle Body Spacer Included: No\u003cbr\u003e\nThrottle Body Type: Drive by Cable\u003cbr\u003e\nThrottle Position Sensor Included: No\u003cbr\u003e\nThrottle Position Sensor Style: GM #17123852\u003cbr\u003e\nVenturi Quantity: 1","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49971288506664,"sku":"81012BK","price":203.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81012bk-1600-2.jpg?v=1736446750"},{"product_id":"velocity-92-mm-4-bolt-ls-throttle-body-black","title":"Velocity 92 mm 4-Bolt LS Throttle Body - Black","description":"\u003cp\u003eDesigned for GM LS fuel injection applications, this throttle body supports responsive airflow control, EFI signal compatibility, and clean fitment on properly matched intake setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBore Size \u0026amp; Airflow Control\u003c\/strong\u003e\u003cbr\u003eThe bore size is listed as 92 mm, with a Factory Style 4-Bolt Pattern bolt pattern helping match airflow capacity to the intake manifold and engine combination. Fuel system type is listed as Electronic Fuel Injection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThrottle Body Construction\u003c\/strong\u003e\u003cbr\u003eAluminum construction with a black finish and gasket inclusion listed as No supports clean installation and long-term throttle-body service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSensor \/ Control Compatibility\u003c\/strong\u003e\u003cbr\u003eThrottle position sensor included: No. Idle air control motor included: No. Confirm drive-by-wire or cable setup, connector compatibility, and calibration requirements before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; Calibration Matching\u003c\/strong\u003e\u003cbr\u003eCommon use cases include Chevrolet Silverado, GMC Sierra, Chevrolet Camaro. Verify intake bore size, throttle control style, sensor configuration, and tuning requirements before installation.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003e102MM LSX TSP FABRICATED INTAKE MANIFOLDS\u003cbr\u003e• 81001\u003cbr\u003e• 81002\u003cbr\u003e• 81003\u003cbr\u003e• 81007\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Corvette\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nBore Diameter: 92 mm\u003cbr\u003e\nFuel Injectors Included: No\u003cbr\u003e\nFuel System Grade: Regular\u003cbr\u003e\nFuel System Injection Type: Multi-port\u003cbr\u003e\nFuel System Type: Electronic Fuel Injection\u003cbr\u003e\nGasket Or Seal Included: No\u003cbr\u003e\nIdle Air Control Motor Included: No\u003cbr\u003e\nIdle Air Control Motor Style: GM #17113598\u003cbr\u003e\nMounting Hardware Included: Yes\u003cbr\u003e\nThrottle Body Bolt Pattern: Factory Style 4-Bolt Pattern\u003cbr\u003e\nThrottle Body Finish: Black\u003cbr\u003e\nThrottle Body Material: Aluminum\u003cbr\u003e\nThrottle Body Spacer Included: No\u003cbr\u003e\nThrottle Body Type: Drive by Cable\u003cbr\u003e\nThrottle Position Sensor Included: No\u003cbr\u003e\nThrottle Position Sensor Style: GM #17123852\u003cbr\u003e\nVenturi Quantity: 1","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49971295158568,"sku":"81042BK","price":203.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/velocity81042bk-2-1600.jpg?v=1732636866"},{"product_id":"105mm-4-bolt-ls-throttle-cable-bracket-black","title":"105mm 4-Bolt LS Throttle Cable Bracket - Black","description":"\u003cp\u003eBuilt for universal throttle linkage setups, this throttle cable supports adjustable pedal-to-throttle connection routing in properly matched EFI or carbureted applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCable Length \u0026amp; Travel\u003c\/strong\u003e\u003cbr\u003eThe cable should be routed to maintain smooth travel and full throttle return.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eJacket \/ End Fitting Details\u003c\/strong\u003e\u003cbr\u003eConfirm bracket compatibility and linkage geometry before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRouting \u0026amp; Linkage Setup\u003c\/strong\u003e\u003cbr\u003eVerify firewall routing, pedal travel, return spring setup, and throttle lever position before final adjustment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; Adjustment\u003c\/strong\u003e\u003cbr\u003eCommon use cases include custom EFI builds, restoration projects, and street performance applications requiring a properly routed throttle cable.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003e4-BOLT LSX TSP DRIVE-BY-CABLE THROTTLE BODIES\u003cbr\u003e• 81012\u003cbr\u003e• 81042\u003cbr\u003e\u003cbr\u003e4-BOLT LSX TSP FABRICATED INTAKE MANIFOLDS\u003cbr\u003e• 81001\u003cbr\u003e• 81002\u003cbr\u003e• 81003\u003cbr\u003e• 81007\u003cbr\u003e• 81043\u003cbr\u003e• 81044\u003cbr\u003e\u003cbr\u003eNOTE: Due to 105mm opening, this will fit any combination of 92mm or 102mm TSP drive-by-cable LSX throttle bodies and fabricated LSX intake manifolds.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eGMC Sierra\u003cbr\u003eChevrolet Camaro\u003cbr\u003eChevrolet Corvette\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nColor: Black\u003cbr\u003e\nColor: Black\u003cbr\u003e\nGasket Included: Yes\u003cbr\u003e\nMaterial: Steel\u003cbr\u003e\nMounting Hardware Included: Yes\u003cbr\u003e\nMounting Hole Quantity: 4\u003cbr\u003e\nThrottle Body Bolt Pattern: OEM 4-Bolt Pattern\u003cbr\u003e\nThrottle Opening: 105 mm\u003cbr\u003e\nUniversal Or Specific Fit: Specific","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49971301056808,"sku":"81013BK","price":38.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81013_1.jpg?v=1736793730"}],"url":"https:\/\/www.topstreetperformance.com\/collections\/ls-lt-air-and-fuel-delivery.oembed?page=4","provider":"Top Street Performance","version":"1.0","type":"link"}