{"title":"Ignition and Electrical","description":"\u003cp\u003eShop high-performance ignition and electrical components designed to deliver reliable spark, consistent power distribution, and optimal engine performance. From ignition coils and spark plug wires to alternators, starters, and wiring components, these parts support efficient operation across all vehicle systems. Ideal for street builds, restoration projects, and high-performance applications.\u003c\/p\u003e\n\u003c!--split--\u003e\n\u003cp\u003eIgnition and electrical systems are responsible for powering vehicle components and initiating the combustion process that drives the engine. The ignition system generates a high-voltage spark that ignites the air-fuel mixture inside the engine, while the electrical system supplies and manages power for essential components throughout the vehicle. \u003c\/p\u003e\n\u003cp\u003eThe ignition system includes key components such as ignition coils, spark plugs, ignition modules, and wiring. These parts work together to convert low battery voltage into the high-voltage spark required for combustion. Precise ignition timing is critical, as the spark must occur at the exact moment to maximize engine power, efficiency, and performance. \u003c\/p\u003e\n\u003cp\u003eThe electrical system supports the entire vehicle by providing power to systems such as the starter, alternator, lighting, sensors, and engine control units. The battery supplies initial power, while the alternator generates electricity to keep the system running during operation.\u003c\/p\u003e\n\u003cp\u003eUpgrading ignition and electrical components can improve engine performance, starting reliability, and overall system efficiency. High-performance ignition systems deliver stronger, more consistent spark, while upgraded electrical components ensure stable voltage and reliable operation under demanding conditions.\u003c\/p\u003e\n\u003cp\u003eCommon components in this category include ignition coils, spark plugs, distributors, wiring harnesses, alternators, starters, and electrical accessories. These parts work together to ensure proper combustion, efficient power delivery, and dependable vehicle operation.\u003c\/p\u003e\n\u003cp\u003eWhether you're restoring a classic vehicle or upgrading a performance build, choosing the right ignition and electrical components helps ensure consistent spark, reliable power distribution, and long-term performance.\u003c\/p\u003e\n\u003ch3\u003eShop Ignition \u0026amp; Electrical Components\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/ignition-components\"\u003eIgnition Components\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/alternators\"\u003eAlternators\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/starters\"\u003eStarters\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/electrical-wiring\"\u003eElectrical Wiring\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShop Distributors by Engine Platform\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/chevrolet-distributors\"\u003eChevrolet Distributors\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/ford-distributors\"\u003eFord Distributors\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/chrysler-distributors\"\u003eChrysler \/ Mopar Distributors\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/pontiac-distributors\"\u003ePontiac Distributors\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/buick-distributors\"\u003eBuick Distributors\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/oldsmobile-distributors\"\u003eOldsmobile Distributors\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/cadillac-distributors\"\u003eCadillac Distributors\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/amc-jeep-distributors\"\u003eAMC \/ Jeep Distributors\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/international-v8-distributors\"\u003eInternational V8 Distributors\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/land-rover-distributors\"\u003eLand Rover Distributors\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/volkswagen-distributors\"\u003eVolkswagen Distributors\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/holden-distributors\"\u003eHolden Distributors\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/studebaker-distributors\"\u003eStudebaker Distributors\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"gm-05-18-ls-high-performance-ignition-coil-single-red","title":"GM '05-'18 LS High Performance Ignition Coil - Single - Red","description":"\u003cp\u003eGive the ignition system a fresh spark source with a performance ignition coil designed for dependable voltage output.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpark Energy\u003c\/strong\u003e\u003cbr\u003eHigh-output spark energy helps improve ignition consistency during startup, idle, and acceleration.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIgnition Coil Construction\u003c\/strong\u003e\u003cbr\u003ePerformance-style construction helps manage heat while maintaining dependable ignition performance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003e0.5 Ohms primary resistance helps match ignition system requirements. Blade terminals support ignition wire connection. Verify mounting style and ignition compatibility before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS-BASED)\u003cbr\u003e• 4.8 L \/ 293 in3 (LR4, LY2, L20)\u003cbr\u003e• 5.3 L \/ 325 in3 (LM7, L59, LM4, L33, LC9, LH6, LH8, LH9, LMF, LMG, LY5, LS4)\u003cbr\u003e• 5.7 L \/ 346 in3 (LS1, LS6)\u003cbr\u003e• 6.0 L \/ 364 in3 (LQ4, LQ9, LS2, L76, LY6, L96, LFA, LZ1)\u003cbr\u003e• 6.2 L \/ 376 in3 (LS3, L92, L94, L9H, L99, LSA, LS9)\u003cbr\u003e• 7.0 L \/ 427 in3 (LS7)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eChevrolet Corvette LS2 \/ LS3 \/ LS7 \/ LS9 applications\u003cbr\u003eChevrolet Camaro LS3 \/ L99 applications\u003cbr\u003ePontiac G8 \/ GTO and Cadillac CTS-V LS-based applications\u003cbr\u003eLS swap builds using matching coil connector and bracket style\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eVerify coil connector style, coil bracket style, and wiring harness compatibility before installation.\u003cbr\u003e8 coils are required for V8 applications when replacing a full set.\u003cbr\u003eFor LS swap use, match the coil connector and bracket style to the harness and valve cover setup.\u003cbr\u003e\u003cbr\u003e\u003cstrong data-start=\"0\" data-end=\"19\" data-is-only-node=\"\"\u003eSPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003eCoil Shape: Square\u003cbr\u003eCoil Type: Coil Pack\u003cbr\u003eCoil Wire Included: No\u003cbr\u003eColor: Red\u003cbr\u003eConnector Gender: Female\u003cbr\u003eGrade Type: Performance\u003cbr\u003eIgnition Type: Electronic\u003cbr\u003eInductance: 2.7 mH\u003cbr\u003eInternal Construction: Epoxy\u003cbr\u003eMount Type: Bolt on\u003cbr\u003eMounting Bracket Included: No\u003cbr\u003eMounting Hardware Included: No\u003cbr\u003eMounting Hole Quantity: 2\u003cbr\u003eOil Filled: No\u003cbr\u003ePeak Current: 220 mA\u003cbr\u003ePrimary Resistance: 0.5 Ohms\u003cbr\u003eQuantity: 1\u003cbr\u003eRequires External Resistor: No\u003cbr\u003eSecondary Resistance: 2,000 Ohms\u003cbr\u003eSpark Duration: 300 ms\u003cbr\u003eTerminal Gender: Female\u003cbr\u003eTerminal Quantity: 2\u003cbr\u003eTerminal Type: Blade\u003cbr\u003eTurns Ratio: 75:1\u003cbr\u003eVoltage: 40,000 V\u003cbr\u003e\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49760230900008,"sku":"81015","price":54.32,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81015-8-2-600_1.jpg?v=1732636829"},{"product_id":"ford-godzilla-ignition-coils-set-of-8-blue","title":"Ford Godzilla Ignition Coils - Set of 8 - Blue","description":"Replace a tired factory-style ignition coil with a performance-focused upgrade that helps improve spark consistency.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpark Energy\u003c\/strong\u003e\u003cbr\u003eHigh-output spark energy helps improve ignition consistency during startup, idle, and acceleration.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIgnition Coil Construction\u003c\/strong\u003e\u003cbr\u003ePerformance-style construction helps manage heat while maintaining dependable ignition performance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003eBlade terminals support ignition wire connection. Verify mounting style and ignition compatibility before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eFORD 7X V8\u003cbr\u003e• 7.3 L \/ 445 in3 Godzilla V8\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eFord F-250 \/ F-350 Super Duty 7.3L gas V8 applications\u003cbr\u003eFord F-450 \/ F-550 Super Duty 7.3L gas V8 applications\u003cbr\u003eFord E-Series 7.3L gas V8 applications\u003cbr\u003eFord 7.3L Godzilla swap builds using matching coil packs\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eVerify connector style, mounting location, and model-year fitment before installation.\u003cbr\u003e8 coils are required for V8 applications when replacing a full set.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eCoil Shape: Rectangular\u003cbr\u003eCoil Type: Coil Pack\u003cbr\u003eCoil Wire Included: No\u003cbr\u003eColor: Blue\u003cbr\u003eConnector Gender: Female\u003cbr\u003eGrade Type: Performance\u003cbr\u003eIgnition Type: Electronic\u003cbr\u003eInternal Construction: Epoxy\u003cbr\u003eMount Type: Bolt on\u003cbr\u003eMounting Bracket Included: No\u003cbr\u003eMounting Hardware Included: No\u003cbr\u003eMounting Hole Quantity: 2\u003cbr\u003eOil Filled: No\u003cbr\u003eRequires External Resistor: No\u003cbr\u003eTerminal Gender: Female\u003cbr\u003eTerminal Quantity: 2\u003cbr\u003eTerminal Type: Blade\u003cbr\u003eVoltage: 40,000 V\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562039025960,"sku":"73030-8BL","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/73030-8bl_001_1.jpg?v=1732636776"},{"product_id":"gm-99-07-ls-truck-style-high-performance-ignition-coil-set-of-8-red","title":"GM '99-'07 LS Truck Style High Performance Ignition Coil - Set of 8 - Red","description":"Add a cleaner, more dependable ignition signal with an ignition coil built around stronger spark output and reliable operation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpark Energy\u003c\/strong\u003e\u003cbr\u003eHigh-output spark energy helps improve ignition consistency during startup, idle, and acceleration.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIgnition Coil Construction\u003c\/strong\u003e\u003cbr\u003ePerformance-style construction helps manage heat while maintaining dependable ignition performance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003e0.5 Ohms primary resistance helps match ignition system requirements. Blade terminals support ignition wire connection. Verify mounting style and ignition compatibility before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS-BASED TRUCK)\u003cbr\u003e• 4.8 L \/ 293 in3 (LR4)\u003cbr\u003e• 5.3 L \/ 325 in3 (LM7, L59, LM4, L33)\u003cbr\u003e• 6.0 L \/ 364 in3 (LQ4, LQ9)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eChevrolet Silverado \/ GMC Sierra 1999-2007 Classic LS-based trucks\u003cbr\u003eChevrolet Tahoe \/ Suburban and GMC Yukon LS-based SUVs\u003cbr\u003eChevrolet Express \/ GMC Savana LS-based vans\u003cbr\u003eTruck LS swap builds using early truck-style coil packs\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eVerify early truck-style coil connector, bracket style, and harness compatibility before installation.\u003cbr\u003e8 coils are required for V8 applications when replacing a full set.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eCoil Shape: Square\u003cbr\u003eCoil Type: Coil Pack\u003cbr\u003eCoil Wire Included: No\u003cbr\u003eColor: Red\u003cbr\u003eConnector Gender: Female\u003cbr\u003eGrade Type: Performance\u003cbr\u003eIgnition Type: Electronic\u003cbr\u003eInductance: 2.7 mH\u003cbr\u003eInternal Construction: Epoxy\u003cbr\u003eMount Type: Bolt on\u003cbr\u003eMounting Bracket Included: Yes\u003cbr\u003eMounting Hardware Included: No\u003cbr\u003eMounting Hole Quantity: 2\u003cbr\u003eOil Filled: No\u003cbr\u003ePeak Current: 220 mA\u003cbr\u003ePrimary Resistance: 0.5 Ohms\u003cbr\u003eQuantity: Set of 8\u003cbr\u003eRequires External Resistor: No\u003cbr\u003eSecondary Resistance: 2,000 Ohms\u003cbr\u003eSpark Duration: 300 ms\u003cbr\u003eTerminal Gender: Female\u003cbr\u003eTerminal Quantity: 2\u003cbr\u003eTerminal Type: Blade\u003cbr\u003eTurns Ratio: 75:1\u003cbr\u003eVoltage: 40,000 V\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49760380092712,"sku":"81016-8","price":391.12,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81016-8-1-600_9ba0bf93-f489-4873-9edc-2a9fdccc6c33.jpg?v=1736983758"},{"product_id":"gm-ls-ignition-coil-relocation-brackets-natural","title":"GM LS Ignition Coil Relocation Brackets - Natural","description":"\u003cp\u003eThis GM LS Ignition Coil Relocation Brackets - Natural is designed for GM LS engine and accessory drive applications that need a clean, rigid ignition coil mounting solution. It helps position the component correctly while improving the finished look and serviceability of the engine bay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication-Specific Mounting\u003c\/strong\u003e\u003cbr\u003e\nThe bracket configuration is built around the listed platform and component layout, helping align the ignition coil with the correct belt, cable, or mounting path.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDurable Bracket Construction\u003c\/strong\u003e\u003cbr\u003e\nManufactured from aluminum, this bracket is designed to handle normal engine vibration, accessory load, and repeated service use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClean Engine Bay Finish\u003c\/strong\u003e\u003cbr\u003e\nThe finished appearance gives the installation a cleaner, more complete look for street, show, and performance builds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003e\n\u003cstrong\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS BASED)\u003c\/strong\u003e\u003cbr\u003e\n• 4.8 L \/ 293 in3 (LR4, LY2, L20)\u003cbr\u003e\n• 5.3 L \/ 325 in3 (LM7, L59, LM4, L33, LC9, LH6, LY5, LMG)\u003cbr\u003e\n• 6.0 L \/ 364 in3 (LQ4, LQ9, LS2, LY6, L76, L96)\u003cbr\u003e\n• 6.2 L \/ 376 in3 (LS3, L92, L99, LS9)\u003cbr\u003e\n• 7.0 L \/ 427 in3 (LS7)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChevrolet Silverado 1500 \/ 2500 \/ 3500\u003c\/li\u003e\n\u003cli\u003eGMC Sierra 1500 \/ 2500 \/ 3500\u003c\/li\u003e\n\u003cli\u003eChevrolet Tahoe \/ Suburban\u003c\/li\u003e\n\u003cli\u003eGMC Yukon \/ Yukon XL\u003c\/li\u003e\n\u003cli\u003eChevrolet Camaro \/ Corvette (LS equipped)\u003c\/li\u003e\n\u003cli\u003ePontiac GTO \/ G8 (LS equipped)\u003c\/li\u003e\n\u003c\/ul\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\nCoil Style: Delco #D510C\/ #81015 Or Delco #D585\/ #81016\u003cbr\u003e\nBracket Material: Aluminum\u003cbr\u003e\nQuantity: 2\u003cbr\u003e\nIncluded: Spacers\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562043154728,"sku":"81020","price":28.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/81020_1-1600.jpg?v=1732636858"},{"product_id":"gm-10si-style-110-amp-alternator-chrome","title":"GM 10SI Style 110 Amp Alternator - Chrome","description":"\u003cp\u003e\u003cspan\u003eUpgrade your vehicle's charging system with this GM 10SI Style 110 Amp Alternator engineered to provide dependable charging performance and increased electrical capacity for a wide range of GM applications. Designed for muscle cars, street rods, classic trucks, restorations, and custom builds, this alternator delivers the charging output needed to support modern electrical accessories while maintaining a clean chrome appearance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe 110 amp output provides a substantial increase in charging capacity over many factory charging systems and helps support electric cooling fans, electric fuel pumps, upgraded ignition systems, aftermarket lighting, air conditioning systems, audio equipment, and other electrical accessories. Increased charging capacity helps maintain stable system voltage during idle, cruising, and stop-and-go driving conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBuilt using the proven GM 10SI alternator platform, this unit features an internal voltage regulator and one-wire capable operation for simplified installation. The 10SI design remains one of the most popular charging system upgrades for classic GM vehicles due to its reliability, simple wiring, and broad compatibility with aftermarket brackets and charging system components.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCompatible with many Chevrolet, Buick, Pontiac, Oldsmobile, and Cadillac applications, this alternator is commonly used on Small Block Chevy, Big Block Chevy, Buick V8, Pontiac V8, Oldsmobile V8, and Cadillac V8 engine combinations. Popular applications include Chevrolet Camaro, Chevelle, Nova, El Camino, Corvette, C10, Pontiac GTO, Firebird, Trans Am, Buick Skylark, GS, Oldsmobile Cutlass, 442, and many street rod and custom vehicle builds.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEquipped with a V-belt pulley and finished in bright chrome, this alternator combines dependable charging performance with show-quality appearance. Whether you're replacing an aging factory alternator, upgrading a restoration project, adding modern electrical accessories, or converting to a simplified one-wire charging system, this GM 10SI-style alternator provides the performance, reliability, and charging capacity needed for dependable operation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e110 Amp Charging Performance\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe 110 amp output provides the charging capacity needed for electric cooling fans, electric fuel pumps, upgraded ignition systems, aftermarket lighting, audio equipment, and other electrical accessories. Increased charging capacity helps maintain stable system voltage under increased electrical demand.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGM 10SI Style Design\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eBuilt using the proven GM 10SI alternator platform with an internal voltage regulator and one-wire capable operation. The 10SI design is widely used in muscle cars, street rods, classic trucks, restoration projects, and custom vehicle builds due to its reliability and simplified wiring.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eBUICK BIG BLOCK V8\u003cbr\u003e• 6.6 L \/ 400 in3\u003cbr\u003e• 7.0 L \/ 430 in3\u003cbr\u003e• 7.5 L \/ 455 in3\u003cbr\u003e\u003cbr\u003eBUICK SMALL BLOCK V8\u003cbr\u003e• 5.7 L \/ 350 in3\u003cbr\u003e• CADILLAC V8\u003cbr\u003e• 6.0 L \/ 368 in3\u003cbr\u003e• 7.0 L \/ 425 in3\u003cbr\u003e• 7.7 L \/ 472 in3\u003cbr\u003e• 8.2 L \/ 500 in3\u003cbr\u003e\u003cbr\u003eCHEVROLET FLAT 6\u003cbr\u003e• 2.7 L \/ 164 in3\u003cbr\u003e\u003cbr\u003eCHEVROLET BIG BLOCK V8 GEN. II (MARK IV)\u003cbr\u003e• 6.5 L \/ 396 in3\u003cbr\u003e• 6.6 L \/ 402 in3\u003cbr\u003e• 7.0 L \/ 427 in3\u003cbr\u003e• 7.4 L \/ 454 in3\u003cbr\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. I\u003cbr\u003e• 4.3 L \/ 262 in3\u003cbr\u003e• 4.4 L \/ 267 in3\u003cbr\u003e• 4.9 L \/ 302 in3\u003cbr\u003e• 5.0 L \/ 305 in3\u003cbr\u003e• 5.0 L \/ 307 in3\u003cbr\u003e• 5.3 L \/ 327 in3\u003cbr\u003e• 5.7 L \/ 350 in3\u003cbr\u003e• 6.6 L \/ 400 in3\u003cbr\u003e\u003cbr\u003eDETROIT DIESEL INLINE 3\u003cbr\u003e• 2.6 L \/ 159 in3\u003cbr\u003e\u003cbr\u003eGM DIESEL V8\u003cbr\u003e• 6.2 L \/ 379 in3\u003cbr\u003e\u003cbr\u003eGM INLINE 4\u003cbr\u003e• 1.4 L \/ 85 in3\u003cbr\u003e• 1.5 L \/ 92 in3\u003cbr\u003e• 1.6 L \/ 98 in3\u003cbr\u003e• 1.8 L \/ 112 in3\u003cbr\u003e• 1.9 L \/ 119 in3\u003cbr\u003e• 2.0 L \/ 122 in3\u003cbr\u003e• 2.3 L \/ 140 in3\u003cbr\u003e• 2.5 L \/ 151 in3\u003cbr\u003e\u003cbr\u003eGM INLINE 6\u003cbr\u003e• 4.1 L \/ 250 in3\u003cbr\u003e• 4.8 L \/ 292 in3\u003cbr\u003e\u003cbr\u003eGM V6\u003cbr\u003e• 2.8 L \/ 173 in3\u003cbr\u003e• 3.0 L \/ 181 in3\u003cbr\u003e• 3.2 L \/ 196 in3\u003cbr\u003e• 3.8 L \/ 229 in3\u003cbr\u003e• 3.8 L \/ 231 in3\u003cbr\u003e• 4.1 L \/ 252 in3\u003cbr\u003e• 4.3 L \/ 262 in3\u003cbr\u003e\u003cbr\u003eISUZU DIESEL INLINE 4\u003cbr\u003e• 1.8 L \/ 111 in3\u003cbr\u003e• 2.2 L \/ 134 in3\u003cbr\u003e\u003cbr\u003eOLDSMOBILE DIESEL V8\u003cbr\u003e• 4.3 L \/ 260 in3\u003cbr\u003e• 5.7 L \/ 350 in3\u003cbr\u003e\u003cbr\u003eOLDSMOBILE V8\u003cbr\u003e• 4.3 L \/ 260 in3\u003cbr\u003e• 5.0 L \/ 307 in3\u003cbr\u003e• 5.7 L \/ 350 in3\u003cbr\u003e• 6.6 L \/ 400 in3\u003cbr\u003e• 6.6 L \/ 403 in3\u003cbr\u003e• 7.5 L \/ 455 in3\u003cbr\u003e\u003cbr\u003ePONTIAC V8\u003cbr\u003e• 4.3 L \/ 265 in3\u003cbr\u003e• 4.9 L \/ 301 in3\u003cbr\u003e• 5.7 L \/ 350 in3\u003cbr\u003e• 6.6 L \/ 400 in3\u003cbr\u003e• 7.0 L \/ 428 in3\u003cbr\u003e• 7.5 L \/ 455 in3\u003cbr\u003eCommonly used in many GM vehicles from 1971-1986.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003e1971-1986 GM cars and light trucks; Chevrolet C\/K Series; Chevrolet Camaro; Chevrolet Corvette; Chevrolet Chevelle; Chevrolet Monte Carlo; GMC C\/K Series; Buick, Oldsmobile, Pontiac, and Cadillac applications using compatible 10SI mounting and wiring.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTES:\u003c\/b\u003e\u003cbr\u003eVerify 10SI case style, mounting ear spacing, pulley alignment, belt type, and one-wire or three-wire wiring requirements before ordering.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eAC Service Tap: No\u003cbr\u003eAmperage Rating: 110 A\u003cbr\u003eBrushless: No\u003cbr\u003eCase Circumference: 17.060 in.\u003cbr\u003eCase Color: Silver\u003cbr\u003eCase Material: Aluminum\u003cbr\u003eDistance Between Mounting Feet: 6.610 in.\u003cbr\u003eDrive End To Pulley 1st Groove Distance: 1.970 in.\u003cbr\u003eDrive End To Rotor Shaft End Distance: 1.720 in.\u003cbr\u003eExternal Fan Included: Yes\u003cbr\u003eExternal Regulator Included: No\u003cbr\u003eFamily: 10SI\u003cbr\u003eFan Type: External\u003cbr\u003eFinish: Chrome\u003cbr\u003eGround Type: Case ground\u003cbr\u003eMounting Configuration Code: 15\u003cbr\u003eMounting Type: Split Mount\u003cbr\u003eOne Wire Capable: Yes\u003cbr\u003eOutside Pulley Diameter: 2.610 in.\u003cbr\u003ePlug Clock Rear View Main Mounting Ear at 6 O Clock: 2 o'clock\u003cbr\u003ePlug Type: 2-pin\u003cbr\u003ePulley Belt Type: V-belt\u003cbr\u003ePulley Groove Quantity: 1\u003cbr\u003ePulley Included: Yes\u003cbr\u003eRegulator Type: Internal\u003cbr\u003eRotation Direction: Clockwise\u003cbr\u003eSplit Mounting Foot Overall Inner Spacing: 6.150 in.\u003cbr\u003eSplit Mounting Foot Overall Outside Spacing: 7.150 in.\u003cbr\u003eTerminal Quantity: 3\u003cbr\u003eVoltage: 12 VDC\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562065076520,"sku":"ES1001C","price":175.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/es1001c-a_3.jpg?v=1732637192"},{"product_id":"denso-style-90-amp-mini-alternator-chrome","title":"Denso Style 90 Amp Mini Alternator - Chrome","description":"\u003cp\u003e\u003cspan\u003eMaximize charging performance without sacrificing valuable engine bay space with this Denso-Style 90 Amp Mini Race Alternator. Designed for street rods, hot rods, race cars, drag cars, engine swaps, custom builds, and other space-constrained applications, this compact alternator delivers reliable charging performance in a lightweight, small-case package.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe 90 amp output provides the charging capacity needed to support upgraded ignition systems, electric fuel pumps, electric cooling fans, lighting upgrades, gauges, data logging systems, and other electrical accessories commonly found on performance vehicles. Increased charging capacity helps maintain stable system voltage while reducing the charging limitations often associated with older factory charging systems.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBuilt using a compact Denso-style housing, this mini alternator is specifically designed for applications where engine bay space is limited. Its lightweight construction and reduced overall size make it a popular choice for street rods, hot rods, drag racing vehicles, kit cars, custom chassis builds, and engine swap projects where clearance around headers, steering components, chassis tubing, or suspension components is critical.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe one-wire capable design simplifies wiring while the internal voltage regulator helps maintain consistent charging performance. These features make installation easier for custom applications where clean wiring and minimal electrical complexity are desired.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEquipped with a V-belt pulley and durable aluminum housing, this alternator is engineered for dependable operation in both street and competition environments. The bright chrome finish provides a clean, show-quality appearance while delivering the performance needed to support modern electrical demands.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhether you're building a street rod, upgrading a hot rod, finishing a race car, or solving clearance issues in a custom engine bay, this Denso-style mini alternator provides the charging capacity, compact packaging, and reliability needed for dependable operation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompact Mini Alternator Design\u003c\/strong\u003e\u003cbr\u003e• Small Denso-style case\u003cbr\u003e• Lightweight aluminum construction\u003cbr\u003e• Ideal for limited-clearance applications\u003cbr\u003e• Popular for engine swaps and custom builds\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e90 Amp Charging Performance\u003c\/strong\u003e\u003cbr\u003e• Supports electric fuel pumps\u003cbr\u003e• Supports ignition systems\u003cbr\u003e• Supports electric cooling fans\u003cbr\u003e• Supports lighting and gauges\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eUniversal applications where alternator dimensions, mounting points, pulley style, belt alignment, and wiring configuration are verified before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eOften used in custom installations requiring a compact alternator package, including:\u003cbr\u003e• Small Block Chevy Builds\u003cbr\u003e• Big Block Chevy Builds\u003cbr\u003e• LS Engine Swaps\u003cbr\u003e• Ford Windsor Builds\u003cbr\u003e• Chrysler Small Block \u0026amp; Big Block Builds\u003cbr\u003e• Custom Muscle Cars\u003cbr\u003e• Classic Trucks\u003cbr\u003e• Off-Road Builds\u003cbr\u003e• Dune Buggies\u003cbr\u003e• Sand Rails\u003c\/p\u003e\n\u003cp\u003eNOTES:\u003cbr\u003e• Universal fitment requires verification of:\u003cbr\u003e• Mounting ear spacing\u003cbr\u003e• Pulley style and diameter\u003cbr\u003e• Belt alignment\u003cbr\u003e• Bracket compatibility\u003cbr\u003e• Wiring configuration\u003cbr\u003e• Engine bay clearance\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eAC Service Tap: No\u003cbr\u003eAmperage Rating: 90 A\u003cbr\u003eBrushless: No\u003cbr\u003eCase Circumference: 13.200 in.\u003cbr\u003eCase Color: Silver\u003cbr\u003eCase Material: Aluminum\u003cbr\u003eDistance Between Mounting Feet: 6.150 in.\u003cbr\u003eExternal Fan Included: No\u003cbr\u003eExternal Regulator Included: No\u003cbr\u003eFamily: Denso\u003cbr\u003eFan Type: Internal\u003cbr\u003eFinish: Chrome\u003cbr\u003eGround Type: Case ground\u003cbr\u003eOne Wire Capable: Yes\u003cbr\u003eOutside Pulley Diameter: 2.610 in.\u003cbr\u003ePulley Belt Type: V-belt\u003cbr\u003ePulley Groove Quantity: 1\u003cbr\u003ePulley Included: Yes\u003cbr\u003eRegulator Type: Internal\u003cbr\u003eRotation Direction: Clockwise\u003cbr\u003eTerminal Quantity: 1\u003cbr\u003eVoltage: 12 VDC\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562065961256,"sku":"ES1004C","price":211.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/ES1004C-02.jpg?v=1779295603"},{"product_id":"gm-cs130-style-160-amp-alternator-with-serpentine-pulley-chrome","title":"GM CS130 Style 160 Amp Alternator with Serpentine Pulley - Chrome","description":"\u003cp\u003e\u003cspan\u003eUpgrade your vehicle's charging system with this GM CS130 Style 160 Amp Alternator engineered to deliver dependable charging performance for vehicles equipped with serpentine accessory drive systems. Designed for compatible GM charging system applications, this high-output alternator provides the electrical capacity needed to support modern accessories while maintaining a clean chrome appearance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe 160 amp output delivers a substantial increase in charging capacity over many factory alternators and helps support electric cooling fans, fuel injection conversions, electric fuel pumps, upgraded ignition systems, aftermarket lighting, air conditioning systems, audio equipment, electric water pumps, and other electrical accessories. Increased charging capacity helps maintain stable system voltage during idle, cruising, and stop-and-go driving conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBuilt using the proven GM CS130 alternator platform, this unit features an internal voltage regulator and one-wire capable operation for simplified installation. The CS130 design is commonly used in street rods, muscle cars, classic trucks, restorations, and custom vehicle builds where increased charging performance and simplified wiring are desired.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCompatible with many Chevrolet Small Block, Chevrolet Big Block, GM V6, GM Inline 4, GM Inline 6, GM Diesel V8, and Oldsmobile V8 applications utilizing CS130 charging systems, this alternator is commonly used on Chevrolet Camaro, Corvette, Caprice, C\/K Series trucks, GMC trucks, and custom GM-based builds equipped with serpentine accessory drives. Fitment is based on alternator type, mounting configuration, wiring connections, bracket compatibility, and pulley alignment rather than engine size alone.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEquipped with a 6-groove serpentine pulley and finished in bright chrome, this alternator combines show-quality appearance with dependable charging capability. Whether you're upgrading a factory charging system, adding electric cooling fans, converting to electronic fuel injection, building a restomod, or supporting additional electrical accessories, this 160 amp alternator delivers the charging performance and reliability needed for today's demanding applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e160 Amp Charging Performance\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe 160 amp output provides the charging capacity needed for electric cooling fans, fuel injection systems, electric fuel pumps, aftermarket ignition systems, lighting upgrades, audio equipment, electric water pumps, and other electrical accessories. High-output charging helps maintain stable voltage under increased electrical loads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGM CS130 Style Design\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eBuilt using the proven GM CS130 alternator platform with an internal voltage regulator and one-wire capable operation. The CS130 design is widely used in street rods, muscle cars, classic trucks, restoration projects, and custom vehicle builds requiring dependable charging performance and simplified wiring.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET BIG BLOCK V8 GEN. II (MARK IV)\u003cbr\u003e• 7.4 L \/ 454 in3\u003c\/p\u003e\n\u003cp\u003eCHEVROLET BIG BLOCK V8 GEN. V\u003cbr\u003e• 7.4 L \/ 454 in3\u003c\/p\u003e\n\u003cp\u003eCHEVROLET SMALL BLOCK V8 GEN. I\u003cbr\u003e• 5.0 L \/ 305 in3\u003cbr\u003e• 5.7 L \/ 350 in3\u003c\/p\u003e\n\u003cp\u003eGM DIESEL V8\u003cbr\u003e• 6.2 L \/ 379 in3\u003cbr\u003e• 6.5 L \/ 395 in3\u003c\/p\u003e\n\u003cp\u003eGM INLINE 4\u003cbr\u003e• 2.5 L \/ 151 in3\u003c\/p\u003e\n\u003cp\u003eGM INLINE 6\u003cbr\u003e• 4.8 L \/ 292 in3\u003c\/p\u003e\n\u003cp\u003eGM V6\u003cbr\u003e• 2.8 L \/ 173 in3\u003cbr\u003e• 3.0 L \/ 181 in3\u003c\/p\u003e\n\u003cp\u003eOLDSMOBILE V8\u003cbr\u003e• 5.0 L \/ 307 in3\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003e1986-1996 GM cars and light trucks; Chevrolet Camaro; Chevrolet Corvette; Chevrolet C\/K Series; Chevrolet Caprice; GMC C\/K Series; Buick, Oldsmobile, Pontiac, and Cadillac applications using compatible CS130 mounting, clocking, pulley, and wiring.\u003c\/p\u003e\n\u003cp\u003eNOTES:\u003cbr\u003e• Designed for CS130 Alternator Applications\u003cbr\u003e• Designed for Serpentine Belt Systems\u003cbr\u003e• One-Wire Capable\u003cbr\u003e• Verify Mounting Ear Spacing Before Ordering\u003cbr\u003e• Verify Pulley Alignment and Wiring Compatibility\u003cbr\u003e• Fitment Depends on Alternator Configuration Rather Than Engine Size Alone\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eAC Service Tap: No\u003cbr\u003eAmperage Rating: 160 A\u003cbr\u003eBrushless: No\u003cbr\u003eCase Circumference: 15.710 in.\u003cbr\u003eCase Color: Silver\u003cbr\u003eCase Material: Aluminum\u003cbr\u003eDistance Between Mounting Feet: 6.610 in.\u003cbr\u003eExternal Fan Included: Yes\u003cbr\u003eExternal Regulator Included: No\u003cbr\u003eFamily: CS130\u003cbr\u003eFan Type: External\u003cbr\u003eFinish: Chrome\u003cbr\u003eGround Type: Case ground\u003cbr\u003eMounting Configuration Code: 15\u003cbr\u003eMounting Type: Split Mount\u003cbr\u003eOne Wire Capable: Yes\u003cbr\u003eOutside Pulley Diameter: 2.610 in.\u003cbr\u003ePlug Clock Rear View Main Mounting Ear at 6 O Clock: 12 o'clock\u003cbr\u003ePlug Type: 4-pin\u003cbr\u003ePulley Belt Type: Serpentine\u003cbr\u003ePulley Groove Quantity: 6\u003cbr\u003ePulley Included: Yes\u003cbr\u003eRegulator Type: Internal\u003cbr\u003eRotation Direction: Clockwise\u003cbr\u003eSplit Mounting Foot Overall Inner Spacing: 6.610 in.\u003cbr\u003eSplit Mounting Foot Overall Outside Spacing: 7.610 in.\u003cbr\u003eTerminal Quantity: 5\u003cbr\u003eVoltage: 12 VDC\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562066616616,"sku":"ES1006C","price":205.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/es1006c-a_1.jpg?v=1732637214"},{"product_id":"chrysler-100-amp-alternator-with-v-belt-pulley-chrome","title":"Chrysler 100 Amp Alternator with V-Belt Pulley - Chrome","description":"\u003cp\u003e\u003cspan\u003eUpgrade your Mopar charging system with this Chrysler Square Back 100 amp alternator designed to deliver dependable charging performance for classic muscle cars, street rods, restoration projects, and custom builds. Featuring a durable aluminum housing, internal voltage regulator, V-belt pulley, and one-wire capable design, this alternator provides the charging capacity needed to support modern electrical accessories while maintaining a clean chrome appearance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe 100 amp output provides a significant increase in charging capacity over many factory charging systems and helps support electric cooling fans, electric fuel pumps, upgraded ignition systems, aftermarket lighting, air conditioning systems, audio equipment, and fuel injection conversions. Increased charging capacity helps maintain stable system voltage during idle, cruising, and stop-and-go driving conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCompatible with many Chrysler Small Block and Big Block applications, including 273, 318, 340, 360, 361, 383, 400, 413, 426 Hemi, and 440 engine combinations, this alternator is commonly used on Dodge Charger, Challenger, Dart, Coronet, Super Bee, Duster, Plymouth Road Runner, GTX, Barracuda, Belvedere, Satellite, and other classic Mopar vehicles.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe internally regulated design eliminates the need for an external voltage regulator while helping maintain consistent charging performance. Its one-wire capable configuration simplifies installation, making it a popular choice for hot rods, muscle cars, restoration projects, engine swaps, and custom Mopar builds where clean wiring and reliable operation are priorities.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEquipped with a 2-groove V-belt pulley and built using a Chrysler Square Back case design, this alternator is engineered for compatibility with many Chrysler charging system layouts from 1961-1989. The bright chrome finish adds a show-quality appearance while delivering the performance and reliability needed for long-term street use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhether you're replacing a factory alternator, upgrading a classic Mopar charging system, adding electric accessories, or building a high-performance street machine, this 100 amp alternator provides the charging performance, reliability, and electrical capacity needed to support today's vehicle demands.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003eHigh Output Charging Performance\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe 100 amp output provides the charging capacity needed for electric cooling fans, electric fuel pumps, upgraded ignition systems, aftermarket lighting, air conditioning systems, audio equipment, and fuel injection conversions. Higher charging capacity helps maintain stable voltage under increased electrical demand.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChrysler Square Back Design\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eBuilt using a Chrysler Square Back case with an internal voltage regulator and one-wire capable operation. This design is commonly used on Mopar muscle cars, street rods, restoration projects, and custom vehicle builds.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eCHRYSLER BIG BLOCK \"B\" V8\u003cbr\u003e• 5.9 L \/ 361 in3\u003cbr\u003e• 6.3 L \/ 383 in3\u003cbr\u003e• 6.6 L \/ 400 in3\u003cbr\u003e\u003cbr\u003eCHRYSLER BIG BLOCK \"RB\" V8\u003cbr\u003e• 6.8 L \/ 413 in3\u003cbr\u003e• 7.0 L \/ 426 in3 commonly referred to as \"426 Wedge\"\u003cbr\u003e• 7.2 L \/ 440 in3\u003cbr\u003e\u003cbr\u003eCHRYSLER SMALL BLOCK \"LA\" V8\u003cbr\u003e• 5.2 L \/ 318 in3\u003cbr\u003e• 5.8 L \/ 360 in3\u003cbr\u003e\u003cbr\u003eCHRYSLER INLINE \"SLANT\" 6\u003cbr\u003e• 3.7 L \/ 225 in3\u003cbr\u003eCommonly used in many Chrysler vehicles from 1961-1989.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eChrysler, Dodge, and Plymouth applications using compatible Chrysler-style alternator mounting, v-belt pulley alignment, and external-regulator charging system layout.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTES:\u003c\/b\u003e\u003cbr\u003eVerify Chrysler-style mounting, pulley alignment, regulator setup, belt width, and wiring requirements before ordering.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eAC Service Tap: No\u003cbr\u003eAmperage Rating: 100 A\u003cbr\u003eBrushless: No\u003cbr\u003eCase Circumference: 17.060 in.\u003cbr\u003eCase Color: Silver\u003cbr\u003eCase Material: Aluminum\u003cbr\u003eDistance Between Mounting Feet: 6.610 in.\u003cbr\u003eExternal Fan Included: No\u003cbr\u003eExternal Regulator Included: No\u003cbr\u003eFamily: Square Back\u003cbr\u003eFan Type: Internal\u003cbr\u003eFinish: Chrome\u003cbr\u003eGround Type: Case ground\u003cbr\u003eMounting Type: A\u003cbr\u003eOne Wire Capable: Yes\u003cbr\u003eOutside Pulley Diameter: 2.750 in.\u003cbr\u003ePulley Belt Type: V-belt\u003cbr\u003ePulley Groove Quantity: 2\u003cbr\u003ePulley Included: Yes\u003cbr\u003eRegulator Type: Internal\u003cbr\u003eRotation Direction: Clockwise\u003cbr\u003eSplit Mounting Foot Overall Inner Spacing: 6.610 in.\u003cbr\u003eSplit Mounting Foot Overall Outside Spacing: 7.950 in.\u003cbr\u003eTerminal Quantity: 2\u003cbr\u003eVoltage: 12 VDC\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49760229622056,"sku":"ES1013C","price":339.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/es1013c-1600_1.jpg?v=1732637222"},{"product_id":"denso-style-90-amp-mini-race-alternator-with-3-8-v-belt-pulley-chrome","title":"Denso Style 90 Amp Mini Alternator with 3\/8\" V-Belt Pulley - Chrome","description":"\u003cp\u003e\u003cspan\u003eMaximize charging performance without sacrificing valuable engine bay space with this Denso-Style 90 Amp Mini Race Alternator featuring a 3\/8-inch V-belt pulley. Designed for street rods, hot rods, race cars, drag cars, engine swaps, kit cars, and custom builds, this compact alternator delivers dependable charging performance in a lightweight, space-saving package.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe 90 amp output provides the charging capacity needed to support upgraded ignition systems, electric fuel pumps, electric cooling fans, auxiliary lighting, gauges, data logging systems, and other electrical accessories commonly found on performance vehicles. Increased charging capacity helps maintain stable system voltage while supporting modern electrical demands.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBuilt with a compact Denso-style housing, this mini alternator is engineered for applications where clearance is limited around headers, steering components, chassis tubing, suspension components, or engine accessories. Its lightweight design and reduced overall dimensions make it a popular choice for engine swaps, custom chassis builds, race vehicles, and other installations where a traditional alternator may not fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe included 3\/8-inch V-belt pulley is designed for use with compatible V-belt drive systems commonly found on street rods, hot rods, classic vehicles, and custom engine combinations. The one-wire capable design simplifies wiring while the internal voltage regulator helps maintain consistent charging performance without the need for an external regulator.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFinished in bright chrome, this alternator delivers both show-quality appearance and dependable charging capability. Whether you're building a street rod, upgrading a hot rod, completing an engine swap, or solving clearance issues in a custom engine bay, this Denso-style mini alternator provides the compact packaging, charging performance, and reliability needed for dependable operation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompact Mini Alternator Design\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe Denso-style housing is engineered for applications where space is limited around headers, steering components, suspension parts, chassis tubing, and other engine bay obstacles. Its compact footprint makes it a popular choice for street rods, hot rods, race cars, engine swaps, and custom vehicle builds.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e90 Amp Charging Performance\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe 90 amp output provides dependable charging capacity for upgraded ignition systems, electric fuel pumps, electric cooling fans, auxiliary lighting, gauges, and other electrical accessories commonly found on performance vehicles. Increased charging capacity helps maintain stable system voltage under varying electrical loads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eUniversal applications where alternator dimensions, mounting points, pulley style, belt alignment, and wiring configuration are verified before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eOften used in custom installations requiring a compact alternator package, including:\u003cbr\u003e• Small Block Chevy Builds\u003cbr\u003e• Big Block Chevy Builds\u003cbr\u003e• LS Engine Swaps\u003cbr\u003e• Ford Windsor Builds\u003cbr\u003e• Chrysler Small Block \u0026amp; Big Block Builds\u003cbr\u003e• Custom Muscle Cars\u003cbr\u003e• Classic Trucks\u003cbr\u003e• Dune Buggies\u003cbr\u003e• Sand Rails\u003cbr\u003e• Off-Road Builds\u003c\/p\u003e\n\u003cp\u003eNOTES\u003cbr\u003e• Universal fitment requires verification of:\u003cbr\u003e• Mounting dimensions\u003cbr\u003e• Mounting ear spacing\u003cbr\u003e• Pulley style and diameter\u003cbr\u003e• Belt alignment\u003cbr\u003e• Bracket compatibility\u003cbr\u003e• Wiring configuration\u003cbr\u003e• Engine bay clearance\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eAC Service Tap: No\u003cbr\u003eAmperage Rating: 90 A\u003cbr\u003eBrushless: No\u003cbr\u003eCase Circumference: 13.200 in.\u003cbr\u003eCase Color: Silver\u003cbr\u003eCase Material: Aluminum\u003cbr\u003eDistance Between Mounting Feet: 6.150 in.\u003cbr\u003eExternal Fan Included: No\u003cbr\u003eExternal Regulator Included: No\u003cbr\u003eFamily: Denso\u003cbr\u003eFan Type: Internal\u003cbr\u003eFinish: Chrome\u003cbr\u003eGround Type: Case ground\u003cbr\u003eOne Wire Capable: Yes\u003cbr\u003eOutside Pulley Diameter: 2.610 in.\u003cbr\u003ePulley Belt Type: 0.375 in. V-belt\u003cbr\u003ePulley Groove Quantity: 1\u003cbr\u003ePulley Included: Yes\u003cbr\u003eRegulator Type: Internal\u003cbr\u003eRotation Direction: Clockwise\u003cbr\u003eTerminal Quantity: 1\u003cbr\u003eVoltage: 12 VDC\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562067206440,"sku":"ES1014C","price":224.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/es1014c_1600.jpg?v=1732637229"},{"product_id":"denso-style-90-amp-mini-race-alternator-with-serpentine-pulley-chrome","title":"Denso Style 90 Amp Mini Alternator with Serpentine Pulley - Chrome","description":"\u003cp\u003e\u003cspan\u003eMaximize charging performance while saving valuable engine bay space with this Denso-Style 90 Amp Mini Race Alternator featuring a serpentine pulley. Designed for street rods, hot rods, race cars, drag cars, engine swaps, kit cars, and custom builds, this compact alternator delivers dependable charging performance in a lightweight, space-saving package.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe 90 amp output provides the charging capacity needed to support upgraded ignition systems, electric fuel pumps, electric cooling fans, auxiliary lighting, gauges, data logging systems, and other electrical accessories commonly found on performance vehicles. Increased charging capacity helps maintain stable system voltage while supporting modern electrical demands during street and competition use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBuilt with a compact Denso-style housing, this mini alternator is engineered for applications where clearance is limited around headers, steering components, suspension systems, chassis tubing, and other engine bay obstacles. Its lightweight construction and reduced overall dimensions make it a popular choice for engine swaps, custom chassis builds, race vehicles, and performance applications where traditional alternators may not fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe included serpentine pulley is designed for use with compatible serpentine belt drive systems commonly found on modern engine combinations and custom accessory drive setups. The one-wire capable design simplifies wiring while the internal voltage regulator helps maintain consistent charging performance without requiring an external regulator.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFinished in bright chrome, this alternator combines show-quality appearance with dependable charging capability. Whether you're building a street rod, upgrading a hot rod, completing an LS swap, finishing a race car, or solving clearance issues in a custom engine bay, this Denso-style mini alternator delivers the compact packaging, charging performance, and reliability needed for dependable operation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompact Mini Alternator Design\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe Denso-style housing is engineered for applications where space is limited around headers, steering components, suspension parts, chassis tubing, and other engine bay obstacles. Its compact footprint makes it a popular choice for street rods, hot rods, race cars, engine swaps, and custom vehicle builds.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e90 Amp Charging Performance\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe 90 amp output provides dependable charging capacity for upgraded ignition systems, electric fuel pumps, electric cooling fans, auxiliary lighting, gauges, and other electrical accessories commonly found on performance vehicles. Increased charging capacity helps maintain stable system voltage under varying electrical loads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eUniversal applications where alternator dimensions, mounting points, pulley alignment, belt routing, and wiring configuration are verified before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eOften used in custom installations requiring a compact alternator package, including:\u003cbr\u003e• LS Engine Swaps\u003cbr\u003e• Small Block Chevy Builds\u003cbr\u003e• Big Block Chevy Builds\u003cbr\u003e• Ford Windsor Builds\u003cbr\u003e• Chrysler Small Block \u0026amp; Big Block Builds\u003cbr\u003e• Custom Muscle Cars\u003cbr\u003e• Classic Trucks\u003cbr\u003e• Dune Buggies\u003cbr\u003e• Sand Rails\u003cbr\u003e• Off-Road Builds\u003c\/p\u003e\n\u003cp\u003eNOTES:\u003cbr\u003e• Universal fitment requires verification of:\u003cbr\u003e• Mounting dimensions\u003cbr\u003e• Mounting ear spacing\u003cbr\u003e• Pulley alignment\u003cbr\u003e• Belt routing\u003cbr\u003e• Bracket compatibility\u003cbr\u003e• Wiring configuration\u003cbr\u003e• Engine bay clearance\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eAC Service Tap: No\u003cbr\u003eAmperage Rating: 90 A\u003cbr\u003eBrushless: No\u003cbr\u003eCase Circumference: 13.200 in.\u003cbr\u003eCase Color: Silver\u003cbr\u003eCase Material: Aluminum\u003cbr\u003eDistance Between Mounting Feet: 6.150 in.\u003cbr\u003eExternal Fan Included: No\u003cbr\u003eExternal Regulator Included: No\u003cbr\u003eFamily: Denso\u003cbr\u003eFan Type: Internal\u003cbr\u003eFinish: Chrome\u003cbr\u003eGround Type: Case ground\u003cbr\u003eOne Wire Capable: Yes\u003cbr\u003eOutside Pulley Diameter: 2.610 in.\u003cbr\u003ePulley Belt Type: 0.375 in. V-belt\u003cbr\u003ePulley Groove Quantity: 1\u003cbr\u003ePulley Included: Yes\u003cbr\u003eRegulator Type: Internal\u003cbr\u003eRotation Direction: Clockwise\u003cbr\u003eTerminal Quantity: 1\u003cbr\u003eVoltage: 12 VDC\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562067435816,"sku":"ES1015C","price":224.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/es1015c_1600.jpg?v=1732637236"},{"product_id":"gm-cs-130-style-220-amp-alternator-with-v-belt-pulley-chrome","title":"GM CS-130 Style 220 Amp Alternator with V-Belt Pulley - Chrome","description":"\u003cp\u003e\u003cspan\u003eUpgrade your vehicle's charging system with this GM CS130-Style 220 Amp Alternator engineered to deliver exceptional charging performance for vehicles with increased electrical demands. Designed for Small Block Chevy, Big Block Chevy, street rod, muscle car, classic truck, restoration, and custom build applications, this high-output alternator provides the charging capacity needed to support modern electrical accessories and performance upgrades.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe 220 amp output provides significantly more charging capacity than many factory alternators and helps support dual electric cooling fans, electric fuel pumps, fuel injection conversions, upgraded ignition systems, aftermarket lighting, air conditioning systems, audio equipment, electric water pumps, air ride systems, and other high-demand electrical accessories. Increased charging capacity helps maintain stable system voltage during idle, cruising, and stop-and-go driving conditions while reducing voltage drops under heavy electrical loads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCompatible with many Small Block Chevy and Big Block Chevy engine combinations including 283, 305, 307, 327, 350, 383, 400, 396, 402, 427, and 454 applications, this alternator is a popular charging system upgrade for Chevrolet Camaro, Chevelle, Nova, El Camino, Corvette, C10, C20, K10, and K20 builds. It is also commonly used in street rods, hot rods, restoration projects, and custom engine swap applications requiring increased charging performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBuilt with a GM CS130-style case, this alternator features an internal voltage regulator and one-wire capable operation for simplified installation. The one-wire design helps reduce wiring complexity while maintaining dependable charging system performance, making it a popular choice for custom vehicles, muscle cars, and restoration projects where clean wiring and reliability are important.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEquipped with a V-belt pulley and finished in bright chrome, this alternator combines show-quality appearance with dependable charging capability. Whether you're replacing a factory alternator, upgrading a classic Chevy charging system, supporting EFI and electric fan conversions, or adding modern accessories to your vehicle, this 220 amp alternator delivers the charging performance, reliability, and electrical capacity needed for today's demanding applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e220 Amp Charging Performance\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe 220 amp output provides the charging capacity needed for dual electric cooling fans, electric fuel pumps, fuel injection systems, aftermarket ignition systems, lighting upgrades, audio equipment, air ride systems, electric water pumps, and other high-demand electrical accessories. High-output charging helps maintain stable voltage under increased electrical loads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGM CS130 Style Design\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eBuilt using a GM CS130-style case with an internal voltage regulator and one-wire capable operation. This design is commonly used on street rods, muscle cars, classic trucks, restoration projects, and custom vehicle builds requiring increased charging capacity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\u003cbr\u003eCHEVROLET BIG BLOCK V8 GEN. II (MARK IV)\u003cbr\u003e• 7.4 L \/ 454 in3\u003cbr\u003e\u003cbr\u003eCHEVROLET BIG BLOCK V8 GEN. V\u003cbr\u003e• 7.4 L \/ 454 in3\u003cbr\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. I\u003cbr\u003e• 5.0 L \/ 305 in3\u003cbr\u003e• 5.7 L \/ 350 in3\u003cbr\u003e\u003cbr\u003eGM DIESEL V8\u003cbr\u003e• 6.2 L \/ 379 in3\u003cbr\u003e• 6.5 L \/ 395 in3\u003cbr\u003e\u003cbr\u003eGM INLINE 4\u003cbr\u003e• 2.5 L \/ 151 in3\u003cbr\u003e\u003cbr\u003eGM INLINE 6\u003cbr\u003e• 4.8 L \/ 292 in3\u003cbr\u003e\u003cbr\u003eGM V6\u003cbr\u003e• 2.8 L \/ 173 in3\u003cbr\u003e• 3.0 L \/ 181 in3\u003cbr\u003e\u003cbr\u003eOLDSMOBILE V8\u003cbr\u003e• 5.0 L \/ 307 in3\u003cbr\u003eCommonly used in GM vehicles from 1985-1993.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003e1986-1996 GM cars and light trucks; Chevrolet Camaro; Chevrolet Corvette; Chevrolet C\/K Series; Chevrolet Caprice; GMC C\/K Series; Buick, Oldsmobile, Pontiac, and Cadillac applications using compatible CS130 mounting, clocking, pulley, and wiring.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTES:\u003c\/b\u003e\u003cbr\u003eVerify CS130 case style, connector, mounting ear spacing, clocking, pulley alignment, and belt type before ordering.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eAC Service Tap: No\u003cbr\u003eAmperage Rating: 220 A\u003cbr\u003eBrushless: No\u003cbr\u003eCase Circumference: 15.710 in.\u003cbr\u003eCase Color: Silver\u003cbr\u003eCase Material: Aluminum\u003cbr\u003eDistance Between Mounting Feet: 6.610 in.\u003cbr\u003eExternal Fan Included: Yes\u003cbr\u003eExternal Regulator Included: No\u003cbr\u003eFamily: CS130\u003cbr\u003eFan Type: External\u003cbr\u003eFinish: Chrome\u003cbr\u003eGround Type: Case ground\u003cbr\u003eMounting Configuration Code: 15\u003cbr\u003eMounting Type: Split Mount\u003cbr\u003eOne Wire Capable: Yes\u003cbr\u003eOutside Pulley Diameter: 2.610 in.\u003cbr\u003ePlug Clock Rear View Main Mounting Ear at 6 O Clock: 12 o'clock\u003cbr\u003ePlug Type: 4-pin\u003cbr\u003ePulley Belt Type: V-belt\u003cbr\u003ePulley Groove Quantity: 1\u003cbr\u003ePulley Included: Yes\u003cbr\u003eRegulator Type: Internal\u003cbr\u003eRotation Direction: Clockwise\u003cbr\u003eSplit Mounting Foot Overall Inner Spacing: 6.610 in.\u003cbr\u003eSplit Mounting Foot Overall Outside Spacing: 7.610 in.\u003cbr\u003eTerminal Quantity: 5\u003cbr\u003eVoltage: 12 VDC\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562067763496,"sku":"ES1022C","price":258.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/es1022c-1-1600.jpg?v=1732637244"},{"product_id":"gm-ad244-style-high-output-220-amp-alternator-chrome","title":"GM AD244 Style High Output 220 Amp Alternator - Chrome","description":"\u003cp\u003e\u003cspan\u003eUpgrade your LS truck charging system with this GM AD244 Style High Output 220 Amp Alternator engineered to deliver exceptional charging performance for vehicles with increased electrical demands. Designed for compatible GM LS truck accessory drive systems, this alternator provides the charging capacity needed to support modern performance upgrades, electrical accessories, and high-demand vehicle systems.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe 220 amp output provides a substantial increase over many factory charging systems and helps support electric cooling fans, electronic fuel injection systems, electric fuel pumps, aftermarket ignition systems, high-output lighting, air conditioning systems, audio equipment, winches, off-road accessories, and other power-hungry electrical components. Increased charging capacity helps maintain stable system voltage during idle, cruising, towing, and demanding operating conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBuilt using the GM AD244 case design commonly found on many 1999-2006 GM truck applications, this alternator is designed for use with compatible LS truck accessory drive systems and factory-style AD244 mounting brackets. It is commonly used on 4.8L, 5.3L, 5.7L, 6.0L, 6.5L Diesel, 6.6L Duramax, and 8.1L applications where increased charging capacity is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe internally regulated design helps maintain consistent charging system performance while utilizing the factory-style 4-pin electrical connection commonly found on AD244-equipped applications. Unlike one-wire alternators, this design is intended to integrate with compatible factory-style charging system controls and wiring configurations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEquipped with a 6-groove serpentine pulley and finished in bright chrome, this alternator combines show-quality appearance with dependable charging capability. Whether you're upgrading an LS-powered truck, supporting additional electrical accessories, building a tow vehicle, completing an LS swap with truck accessories, or replacing a factory AD244 alternator, this high-output alternator delivers the charging performance and reliability needed for demanding applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e220 Amp Charging Performance\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe 220 amp output provides the charging capacity needed for electric cooling fans, EFI systems, electric fuel pumps, aftermarket ignition systems, lighting upgrades, audio equipment, off-road accessories, and other high-demand electrical components. High-output charging helps maintain stable system voltage under increased electrical loads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGM AD244 Case Design\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eBuilt using the AD244 alternator platform commonly found on many 1999-2006 GM truck applications. Designed for compatible LS truck accessory drive systems utilizing AD244 mounting locations, factory-style brackets, and factory-style charging system connections.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eGM LS TRUCK ACCESSORY DRIVE SYSTEMS\u003cbr\u003eGM LS-Based 4.8L, 5.3L, 5.7L, and 6.0L Engines\u003cbr\u003eGM 4.3L V6\u003cbr\u003eGM 6.5L Diesel\u003cbr\u003eDuramax 6.6L Diesel\u003cbr\u003eGM 8.1L \/ 496 Big Block\u003cbr\u003eCompatible LS Truck Accessory Drive Systems\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eChevrolet Silverado\u003cbr\u003eChevrolet Tahoe\u003cbr\u003eChevrolet Suburban\u003cbr\u003eGMC Sierra\u003cbr\u003eGMC Yukon\u003cbr\u003eChevrolet Express Vans\u003cbr\u003eGMC Savana Vans\u003cbr\u003eLS Engine Swaps Using Truck Spacing\u003cbr\u003eTow Vehicles\u003cbr\u003eOff-Road Builds\u003c\/p\u003e\n\u003cp\u003eNOTES\u003cbr\u003eDesigned for AD244-style alternator applications\u003cbr\u003eUtilizes factory-style 4-pin connector\u003cbr\u003eNot compatible with 2-pin harnesses\u003cbr\u003eVerify truck vs. car accessory spacing before ordering\u003cbr\u003eVerify mounting brackets and pulley alignment prior to installation\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eAC Service Tap: No\u003cbr\u003eAmperage Rating: 220 A\u003cbr\u003eBrushless: No\u003cbr\u003eCase Circumference: 17.900 in.\u003cbr\u003eCase Color: Silver\u003cbr\u003eCase Material: Aluminum\u003cbr\u003eDistance Between Mounting Feet: 4.100 in.\u003cbr\u003eExternal Fan Included: Yes\u003cbr\u003eExternal Regulator Included: No\u003cbr\u003eFamily: AD-244\u003cbr\u003eFan Type: External\u003cbr\u003eFinish: Chrome\u003cbr\u003eGround Type: Case ground\u003cbr\u003eMounting Type: Split Mount\u003cbr\u003eOne Wire Capable: No\u003cbr\u003eOutside Pulley Diameter: 2.500 in.\u003cbr\u003ePlug Clock Rear View Main Mounting Ear at 6 O Clock: 10 o'clock\u003cbr\u003ePlug Type: 4-pin\u003cbr\u003ePulley Belt Type: Serpentine\u003cbr\u003ePulley Groove Quantity: 6\u003cbr\u003ePulley Included: Yes\u003cbr\u003eRegulator Type: Internal\u003cbr\u003eRotation Direction: Clockwise\u003cbr\u003eSplit Mounting Foot Overall Inner Spacing: 4.100\u003cbr\u003eSplit Mounting Foot Overall Outside Spacing: 5.100\u003cbr\u003eTerminal Quantity: 5\u003cbr\u003eVoltage: 12 VDC\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562067992872,"sku":"ES1024C","price":286.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/es1024-1-1600.jpg?v=1732637251"},{"product_id":"gm-cs130d-style-high-output-180-amp-alternator-chrome","title":"GM CS130D Style High Output 180 Amp Alternator - Chrome","description":"\u003cp\u003e\u003cspan\u003eBuilt using the GM CS130D alternator platform, this unit is designed for compatible LS-based charging systems utilizing factory-style mounting locations and serpentine accessory drives. The CS130D design is commonly found on GM LS-powered performance vehicles and remains a popular upgrade for enthusiasts seeking increased charging capacity while retaining factory-style fitment and wiring compatibility.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCompatible with many GM LS Series V8 applications, including LS1-equipped vehicles and compatible 1998-2002 Chevrolet Camaro and Pontiac Firebird models, this alternator is ideal for vehicles equipped with electric cooling fans, upgraded fuel systems, aftermarket audio equipment, performance ignition systems, and other power-hungry accessories. The factory-style 4-pin connection allows integration with compatible factory-style charging system wiring while maintaining proper charging system operation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe internal voltage regulator helps maintain consistent charging performance under varying electrical loads, making this alternator well-suited for both daily-driven and performance-oriented applications. Unlike many universal alternators, the CS130D platform is designed around modern GM charging system architecture and serpentine accessory drives.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFinished in bright chrome, this alternator combines show-quality appearance with dependable charging capability. Whether you're replacing a factory LS alternator, upgrading a Camaro or Firebird charging system, supporting additional electrical accessories, or increasing charging capacity for a modified LS-powered vehicle, this 180 amp alternator delivers the performance and reliability needed for demanding applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e180 Amp Charging Performance\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe 180 amp output provides the charging capacity needed for electric cooling fans, EFI systems, electric fuel pumps, upgraded ignition systems, lighting upgrades, audio equipment, electric water pumps, and other high-demand electrical accessories. High-output charging helps maintain stable system voltage under increased electrical loads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGM CS130D Alternator Design\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eBuilt using the GM CS130D platform commonly found on LS-powered applications. The Factory-style design supports compatible factory mounting locations, serpentine accessory drives, and factory-style charging system connections.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eGM LS Series V8 Engines\u003cbr\u003eDirect fit for CS130D alternator used in Camaro and Firebird from 1998-2002.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eGM LS Series Camaro and Firebird applications using compatible CS130D mounting, connector, pulley alignment, and charging-system layout.\u003c\/p\u003e\n\u003cp\u003eNOTES\u003cbr\u003e• Designed for CS130D Alternator Applications\u003cbr\u003e• Factory-Style 4-Pin Connector\u003cbr\u003e• Internal Voltage Regulator\u003cbr\u003e• Designed for Serpentine Belt Systems\u003cbr\u003e• Verify Mounting Configuration Before Ordering\u003cbr\u003e• Verify Pulley Alignment and Connector Compatibility\u003cbr\u003e• Fitment Depends on Alternator Type and Charging System Configuration\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eAC Service Tap: No\u003cbr\u003eAmperage Rating: 180 A\u003cbr\u003eBrushless: No\u003cbr\u003eCase Circumference: 16.000 in.\u003cbr\u003eCase Color: Silver\u003cbr\u003eCase Material: Aluminum\u003cbr\u003eDistance Between Mounting Feet: 6.610 in.\u003cbr\u003eExternal Fan Included: Yes\u003cbr\u003eExternal Regulator Included: No\u003cbr\u003eFamily: CS130D\u003cbr\u003eFan Type: External\u003cbr\u003eFinish: Chrome\u003cbr\u003eGround Type: Case ground\u003cbr\u003eMounting Type: Split Mount\u003cbr\u003eOne Wire Capable: No\u003cbr\u003eOutside Pulley Diameter: 2.250 in.\u003cbr\u003ePlug Clock Rear View Main Mounting Ear at 6 O Clock: 5 o'clock\u003cbr\u003ePlug Type: 4-pin\u003cbr\u003ePulley Belt Type: Serpentine\u003cbr\u003ePulley Groove Quantity: 6\u003cbr\u003ePulley Included: Yes\u003cbr\u003eRegulator Type: Internal\u003cbr\u003eRotation Direction: Clockwise\u003cbr\u003eSplit Mounting Foot Overall Inner Spacing: 6.610\u003cbr\u003eSplit Mounting Foot Overall Outside Spacing: 7.610\u003cbr\u003eTerminal Quantity: 5\u003cbr\u003eVoltage: 12 VDC\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562068910376,"sku":"ES1025C","price":286.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/es1025c-1-1600.jpg?v=1732637259"},{"product_id":"gm-cs-130-type-220-amp-alternator-with-serpentine-pulley-chrome","title":"GM CS-130 Type 220 Amp Alternator with Serpentine Pulley - Chrome","description":"\u003cp\u003e\u003cspan\u003eUpgrade your vehicle's charging system with this GM CS130 Type 220 Amp Alternator engineered to deliver exceptional charging performance for vehicles with increased electrical demands. Designed for compatible GM CS130 charging system applications, this high-output alternator provides the charging capacity needed to support modern electrical accessories, performance upgrades, and demanding vehicle systems.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe 220 amp output provides significantly more charging capacity than many factory alternators and helps support dual electric cooling fans, electric fuel pumps, fuel injection conversions, upgraded ignition systems, aftermarket lighting, air conditioning systems, audio equipment, electric water pumps, air ride systems, and other high-demand electrical accessories. Increased charging capacity helps maintain stable system voltage during idle, cruising, and stop-and-go driving conditions while reducing voltage drops under heavy electrical loads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBuilt using the proven GM CS130 alternator platform, this unit features an internal voltage regulator and one-wire capable operation for simplified installation. The CS130 design is commonly used on many GM applications and remains a popular charging system upgrade for street rods, muscle cars, classic trucks, restoration projects, and custom vehicle builds requiring increased charging performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCompatible with many Chevrolet Small Block, Chevrolet Big Block, GM V6, GM Inline 4, GM Inline 6, GM Diesel V8, and Oldsmobile V8 applications utilizing CS130 charging systems, this alternator is commonly used on Chevrolet Camaro, Chevelle, Nova, El Camino, Corvette, C\/K Series trucks, and custom GM-based builds equipped with serpentine accessory drive systems. Fitment is based on alternator type, mounting configuration, wiring connections, bracket compatibility, and pulley alignment rather than engine size alone.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEquipped with a 6-groove serpentine pulley and finished in bright chrome, this alternator combines show-quality appearance with dependable charging capability. Whether you're replacing a factory CS130 alternator, upgrading a classic GM charging system, supporting EFI and electric fan conversions, or adding modern electrical accessories to your vehicle, this 220 amp alternator delivers the charging performance, reliability, and electrical capacity needed for today's demanding applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e220 Amp Charging Performance\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe 220 amp output provides the charging capacity needed for dual electric cooling fans, electric fuel pumps, fuel injection systems, aftermarket ignition systems, lighting upgrades, audio equipment, air ride systems, electric water pumps, and other high-demand electrical accessories. High-output charging helps maintain stable voltage under increased electrical loads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGM CS130 Style Design\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eBuilt using the GM CS130 alternator platform with an internal voltage regulator and one-wire capable operation. This design is commonly used on street rods, muscle cars, classic trucks, restoration projects, and custom vehicle builds requiring increased charging capacity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eGENERAL MOTORS VEHICLES EQUIPPED WITH CS130 ALTERNATOR (SERPENTINE SYSTEMS)\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. I\u003cbr\u003e• 5.0 L \/ 305 in³\u003cbr\u003e• 5.7 L \/ 350 in³\u003cbr\u003e• 6.6 L \/ 400 in³\u003c\/p\u003e\n\u003cp\u003eCHEVROLET BIG BLOCK V8 GEN. II (MARK IV)\u003cbr\u003e• 7.4 L \/ 454 in³\u003c\/p\u003e\n\u003cp\u003eCHEVROLET BIG BLOCK V8 GEN. V\u003cbr\u003e• 7.4 L \/ 454 in³\u003c\/p\u003e\n\u003cp\u003eGM V6 ENGINES\u003c\/p\u003e\n\u003cp\u003eGM INLINE 4 ENGINES\u003cbr\u003e• 2.5 L \/ 151 in³\u003c\/p\u003e\n\u003cp\u003eGM INLINE 6 ENGINES\u003cbr\u003e• 4.8 L \/ 292 in³\u003c\/p\u003e\n\u003cp\u003eGM DIESEL V8 ENGINES\u003cbr\u003e• 6.2 L \/ 379 in³\u003cbr\u003e• 6.5 L \/ 395 in³\u003c\/p\u003e\n\u003cp\u003eOLDSMOBILE V8 ENGINES\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003e1986-1996 GM cars and light trucks; Chevrolet Camaro; Chevrolet Corvette; Chevrolet C\/K Series; Chevrolet Caprice; GMC C\/K Series; Buick, Oldsmobile, Pontiac, and Cadillac applications using compatible CS130 mounting, clocking, pulley, and wiring.\u003c\/p\u003e\n\u003cp\u003eNOTES:\u003cbr\u003eDesigned for CS130 Alternator Applications\u003cbr\u003eSerpentine Belt Systems Only\u003cbr\u003eOne-Wire Capable\u003cbr\u003eVerify Mounting Brackets Before Ordering\u003cbr\u003eVerify Pulley Alignment and Wiring Compatibility\u003cbr\u003eFitment Depends on Alternator Configuration Rather Than Engine Size Alone\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eAC Service Tap: No\u003cbr\u003eAmperage Rating: 220 A\u003cbr\u003eBrushless: No\u003cbr\u003eCase Circumference: 15.710 in.\u003cbr\u003eCase Color: Silver\u003cbr\u003eCase Material: Aluminum\u003cbr\u003eDistance Between Mounting Feet: 6.610 in.\u003cbr\u003eExternal Fan Included: Yes\u003cbr\u003eExternal Regulator Included: No\u003cbr\u003eFamily: CS130\u003cbr\u003eFan Type: External\u003cbr\u003eFinish: Chrome\u003cbr\u003eGround Type: Case ground\u003cbr\u003eMounting Configuration Code: 15\u003cbr\u003eMounting Type: Split Mount\u003cbr\u003eOne Wire Capable: Yes\u003cbr\u003eOutside Pulley Diameter: 2.610 in.\u003cbr\u003ePlug Clock Rear View Main Mounting Ear at 6 O Clock: 12 o'clock\u003cbr\u003ePlug Type: 4-pin\u003cbr\u003ePulley Belt Type: Serpentine\u003cbr\u003ePulley Groove Quantity: 6\u003cbr\u003ePulley Included: Yes\u003cbr\u003eRegulator Type: Internal\u003cbr\u003eRotation Direction: Clockwise\u003cbr\u003eSplit Mounting Foot Overall Inner Spacing: 6.610 in.\u003cbr\u003eSplit Mounting Foot Overall Outside Spacing: 7.610 in.\u003cbr\u003eTerminal Quantity: 5\u003cbr\u003eVoltage: 12 VDC\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562069041448,"sku":"ES1026C","price":286.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/es1026c_001.jpg?v=1732637266"},{"product_id":"ford-1g-style-110-amp-alternator-chrome","title":"Ford 1G Style 110 Amp Alternator - Chrome","description":"\u003cp\u003e\u003cspan\u003eUpgrade your vehicle's charging system with this Ford 1G-Style 110 Amp Alternator engineered to provide dependable charging performance and increased electrical capacity for classic Ford, Lincoln, Mercury, and AMC applications. Designed for restorations, muscle cars, classic trucks, street rods, and custom builds, this alternator delivers the charging output needed to support modern electrical accessories while maintaining a clean chrome appearance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe 110 amp output provides a substantial increase in charging capacity over many factory charging systems and helps support electric cooling fans, electric fuel pumps, upgraded ignition systems, fuel injection conversions, aftermarket lighting, air conditioning systems, audio equipment, and other high-demand accessories. Increased charging capacity helps maintain stable system voltage during idle, cruising, and stop-and-go driving conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCompatible with many Ford Windsor, Cleveland, Modified, FE, MEL, and 385 Series engine combinations, including popular 260, 289, 302, 351W, 351C, 351M, 390, 427, 428, 429, and 460 applications, this alternator is commonly used on Ford Mustang, Bronco, F100, F150, Fairlane, Torino, Galaxie, LTD, Ranchero, Mercury Cougar, and other classic Ford platforms.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe internal voltage regulator helps maintain consistent charging performance while eliminating the need for an external regulator. Its one-wire capable design simplifies installation, making it a popular choice for hot rods, restorations, engine swaps, and custom vehicle builds where clean wiring and dependable operation are priorities.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEquipped with a V-belt pulley and finished in bright chrome, this alternator combines reliable charging performance with show-quality appearance. Whether you're replacing a factory alternator, upgrading a classic Ford charging system, adding modern electrical accessories, or converting to a simplified one-wire charging setup, this Ford 1G-style alternator provides the performance and reliability needed for dependable operation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Output Charging Performance\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe 110 amp output provides the charging capacity needed for electric cooling fans, electric fuel pumps, upgraded ignition systems, fuel injection conversions, aftermarket lighting, air conditioning systems, audio equipment, and other electrical accessories. Higher charging capacity helps maintain stable voltage under increased electrical demand.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFord 1G Style Design\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eBuilt with a Ford 1G-style case featuring an internal voltage regulator and one-wire capable operation. This design is commonly used on classic Ford, Lincoln, Mercury, and AMC applications where dependable charging performance and simplified wiring are desired.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH:\u003c\/strong\u003e\u003cbr\u003eMany Ford Small Block Windsor, FE Big Block, 385-Series Big Block, Cleveland\/Modified, and Ford Inline-6 applications using Ford 1G-style alternator mounting geometry. Also fits select AMC and Jeep AMC-based engine applications. Verify mounting dimensions, pulley alignment, regulator type, and wiring configuration before ordering.\u003cbr\u003e• Ford Small Block Windsor\u003cbr\u003e• Ford FE Big Block\u003cbr\u003e• Ford 385-Series Big Block\u003cbr\u003e• Ford Cleveland \/ Modified Series\u003cbr\u003e• Ford Inline-6\u003cbr\u003e• AMC V8\u003cbr\u003e• AMC Inline-6\u003cbr\u003e• Jeep AMC-based engines\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/strong\u003e\u003cbr\u003eFord Mustang, Fairlane, Torino, Galaxie, F-Series trucks, Bronco, and Econoline models, as well as Mercury Cougar and Comet, Lincoln Continental, Jeep CJ Series and Wagoneer, and AMC Javelin and AMX vehicles using Ford 1G-style alternator mounting and V-belt pulley systems. Verify mounting dimensions, wiring configuration, regulator type, pulley alignment, and clock position before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eAC Service Tap: No\u003cbr\u003eAmperage Rating: 110 A\u003cbr\u003eBrushless: No\u003cbr\u003eCase Circumference: 18.050 in.\u003cbr\u003eCase Color: Silver\u003cbr\u003eCase Material: Aluminum\u003cbr\u003eDistance Between Mounting Feet: 6.610 in.\u003cbr\u003eExternal Fan Included: Yes\u003cbr\u003eExternal Regulator Included: No\u003cbr\u003eFamily: 1G\u003cbr\u003eFan Type: External\u003cbr\u003eFinish: Chrome\u003cbr\u003eGround Type: Case ground\u003cbr\u003eMounting Configuration Code: B\u003cbr\u003eMounting Type: Split Mount\u003cbr\u003eOne Wire Capable: Yes\u003cbr\u003eOutside Pulley Diameter: 2.625 in.\u003cbr\u003ePlug Clock Rear View Main Mounting Ear at 6 O Clock: 12 o'clock\u003cbr\u003ePlug Type: 3-pin\u003cbr\u003ePulley Belt Type: V-belt\u003cbr\u003ePulley Groove Quantity: 1\u003cbr\u003ePulley Included: Yes\u003cbr\u003eRegulator Type: Internal\u003cbr\u003eRotation Direction: Clockwise\u003cbr\u003eSplit Mounting Foot Overall Inner Spacing: 6.610 in.\u003cbr\u003eSplit Mounting Foot Overall Outside Spacing: 7.610 in.\u003cbr\u003eTerminal Quantity: 4\u003cbr\u003eVoltage: 12 VDC\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562069303592,"sku":"ES1031C","price":196.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/es1031c-a_1.jpg?v=1732637274"},{"product_id":"1986-1995-gm-4-3l-v6-distributor","title":"Chevrolet 1986-1995 V6 (262) EFI Distributor","description":"\u003cp\u003eDesigned for enthusiasts looking to upgrade or restore their ignition system, this distributor helps maintain reliable spark output and stable ignition timing across the RPM range.\u003c\/p\u003e\u003cp\u003eIts durable construction and performance-focused design support dependable operation in compatible Chevrolet engine combinations while helping improve throttle response and ignition consistency.\u003c\/p\u003e\u003cp\u003eDesigned for compatible electronic ignition and EFI-equipped applications, this distributor supports reliable signal accuracy and dependable engine management operation when installed with the correct ignition components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eGM 90° V6\u003cbr\u003e• 4.3 L \/ 262 in³\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eDirect replacement for computer-controlled OEM distributor from 1985-1995.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003e• Chevrolet S-10\u003cbr\u003e• Chevrolet Blazer\u003cbr\u003e• Chevrolet Astro\u003cbr\u003e• GMC Sonoma\u003cbr\u003e• GMC Jimmy\u003cbr\u003e• GMC Safari\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003eTrigger Type: Magnetic Pick-Up\u003cbr\u003e\nAdvance Type: Computer-Controlled\u003cbr\u003e\nColor: Red\u003cbr\u003e\nTerminal Gender: Male\u003cbr\u003e\nMechanical Tach Drive: No\u003cbr\u003e\nSlip Collar: No\u003cbr\u003e\nCoil Included: No\u003cbr\u003e\nCoil Type: External\u003cbr\u003e\nCoil Output: 35,000+ V\u003cbr\u003e\nHousing Material: Machined Aluminum\u003cbr\u003e\nGear Material: Steel\u003cbr\u003e\nIgnition Box Required: No\u003cbr\u003e\nMarine Use: No\u003cbr\u003e\nCylinders: 6\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562686947624,"sku":"JM6651R","price":114.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm6651r-1-600.jpg?v=1732638242"},{"product_id":"chevrolet-vortec-v6-262-efi-distributor-black","title":"Chevrolet Vortec V6 (262) EFI Distributor - Black","description":"\u003cp\u003eWhether replacing a worn factory distributor or upgrading a performance build, this distributor is designed to provide dependable spark control, ignition accuracy, and reliable operation.\u003c\/p\u003e\u003cp\u003eThe housing, pickup, and advance system are built to support smooth idle quality, improved engine response, and consistent ignition performance across varying driving conditions.\u003c\/p\u003e\u003cp\u003eDesigned for compatible electronic ignition and EFI-equipped applications, this distributor supports reliable signal accuracy and dependable engine management operation when installed with the correct ignition components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eGM 90° V6\u003cbr\u003e• 4.3 L \/ 262 in³ commonly referred to as Vortec 4300\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eDirect replacement for computer-controlled OEM distributor from 1996-2007.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003e• Chevrolet S-10\u003cbr\u003e• Chevrolet Blazer\u003cbr\u003e• Chevrolet Astro\u003cbr\u003e• GMC Sonoma\u003cbr\u003e• GMC Jimmy\u003cbr\u003e• GMC Safari\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003eTrigger Type: Magnetic Pick-Up\u003cbr\u003e\nAdvance Type: Computer-Controlled\u003cbr\u003e\nColor: Red\u003cbr\u003e\nTerminal Gender: Crab-Style Female\u003cbr\u003e\nMechanical Tach Drive: No\u003cbr\u003e\nSlip Collar: No\u003cbr\u003e\nCoil Included: No\u003cbr\u003e\nCoil Type: External\u003cbr\u003e\nHousing Material: Machined Aluminum\u003cbr\u003e\nGear Material: Steel\u003cbr\u003e\nIgnition Box Required: No\u003cbr\u003e\nMarine Use: No\u003cbr\u003e\nCylinders: 6\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562686882088,"sku":"JM6671BK","price":108.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm6671bk_1-1600_1.jpg?v=1732638254"},{"product_id":"chevrolet-vortec-small-block-v8-305-350-efi-distributor-black","title":"Chevrolet Vortec Small Block V8 (305\/350) EFI Distributor - Black","description":"\u003cp\u003eUpgrade compatible Chevrolet ignition systems with a distributor designed for reliable spark delivery, stable timing characteristics, and dependable high-RPM performance.\u003c\/p\u003e\u003cp\u003eIts precision-engineered construction and ignition components help maintain consistent engine operation while supporting long-term durability in street and performance applications.\u003c\/p\u003e\u003cp\u003eDesigned for compatible electronic ignition and EFI-equipped applications, this distributor supports reliable signal accuracy and dependable engine management operation when installed with the correct ignition components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. I\u003cbr\u003e• 5.0 L \/ 305 in³ commonly referred to as Vortec 5000\u003cbr\u003e• 5.7 L \/ 350 in³ commonly referred to as Vortec 5700\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eDirect replacement for computer-controlled OEM distributor from 1996-2002.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003e• Chevrolet C\/K 1500\u003cbr\u003e• Chevrolet Tahoe\u003cbr\u003e• Chevrolet Suburban\u003cbr\u003e• GMC Sierra\u003cbr\u003e• GMC Yukon\u003cbr\u003e• Chevrolet Express\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003eTrigger Type: Magnetic Pick-Up\u003cbr\u003e\nAdvance Type: Computer-Controlled\u003cbr\u003e\nColor: Black\u003cbr\u003e\nTerminal Gender: Crab-Style Female\u003cbr\u003e\nMechanical Tach Drive: No\u003cbr\u003e\nSlip Collar: No\u003cbr\u003e\nCoil Included: No\u003cbr\u003e\nCoil Type: External\u003cbr\u003e\nHousing Material: Machined Aluminum\u003cbr\u003e\nGear Material: Steel\u003cbr\u003e\nIgnition Box Required: No\u003cbr\u003e\nMarine Use: No\u003cbr\u003e\nCylinders: 8\u003cbr\u003e\nZinc-Coated Steel Hold Down Clamp: Included\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562686849320,"sku":"JM6672BK","price":108.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm6672bk-1-600.jpg?v=1732638260"},{"product_id":"chevrolet-vortec-big-block-v8-454-efi-distributor-black","title":"Chevrolet Vortec Big Block V8 (454) EFI Distributor - Black","description":"\u003cp\u003eThis performance distributor is built to support reliable ignition operation and accurate timing control in compatible Chevrolet engine applications.\u003c\/p\u003e\u003cp\u003eDesigned with durable internal components and stable triggering characteristics, it helps provide dependable startup performance, clean throttle response, and consistent spark delivery.\u003c\/p\u003e\u003cp\u003eDesigned for compatible electronic ignition and EFI-equipped applications, this distributor supports reliable signal accuracy and dependable engine management operation when installed with the correct ignition components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET BIG BLOCK V8 GEN. VI\u003cbr\u003e• 7.4 L \/ 454 in³ commonly referred to as Vortec 7400\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eDirect replacement for computer-controlled OEM distributor from 1996-2000.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003e• Chevrolet C\/K 2500\u003cbr\u003e• Chevrolet C\/K 3500\u003cbr\u003e• GMC Sierra 2500\u003cbr\u003e• GMC Sierra 3500\u003cbr\u003e• Chevrolet Suburban 2500\u003cbr\u003e• Chevrolet Express\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003eTrigger Type: Magnetic Pick-Up\u003cbr\u003e\nAdvance Type: Computer-Controlled\u003cbr\u003e\nColor: Black\u003cbr\u003e\nTerminal Gender: Crab-Style Female\u003cbr\u003e\nMechanical Tach Drive: No\u003cbr\u003e\nSlip Collar: No\u003cbr\u003e\nCoil Included: No\u003cbr\u003e\nCoil Type: External\u003cbr\u003e\nHousing Material: Machined Aluminum\u003cbr\u003e\nGear Material: Steel\u003cbr\u003e\nIgnition Box Required: No\u003cbr\u003e\nMarine Use: No\u003cbr\u003e\nCylinders: 8\u003cbr\u003e\nZinc-Coated Steel Hold Down Clamp: Included\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562686816552,"sku":"JM6673BK","price":108.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm6673k-1-600.jpg?v=1732638267"},{"product_id":"holden-253-308-v8-ready-to-run-distributor-red","title":"Holden 253-308 V8 Ready to Run Distributor - Red","description":"\u003cp\u003eEngineered for dependable ignition performance, this distributor is designed to provide accurate timing control, stable spark delivery, and reliable ignition operation in compatible applications.\u003c\/p\u003e\u003cp\u003eThe precision-engineered housing and ignition components help support smooth startup characteristics, responsive acceleration, and consistent ignition performance across the RPM range.\u003c\/p\u003e\u003cp\u003eDesigned for use in compatible street and performance applications, this distributor supports long-term ignition reliability and dependable engine operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eHOLDEN V8\u003cbr\u003e• 4.1 L \/ 253 in3\u003cbr\u003e• 5.0 L \/ 304 in3\u003cbr\u003e• 5.0 L \/ 308 in3\u003cbr\u003e\u003cbr\u003eNOTE: Distributor gear is most compatible with cast iron hydraulic or solid flat tappet camshafts; consult cam manufacturer for recommended gear material.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003e• Holden Commodore\u003cbr\u003e• Holden Monaro\u003cbr\u003e• Holden Kingswood\u003cbr\u003e• Holden Torana\u003cbr\u003e• Holden Statesman\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003e\nTrigger Type: Multi-Pole Reluctor (Halls Effect)\u003cbr\u003e\nAdvance Type: Mechanical and Vacuum\u003cbr\u003e\nColor: Available in Black or Red\u003cbr\u003e\nTerminal Gender: Male\u003cbr\u003e\nMechanical Tach Drive: No\u003cbr\u003e\nSlip Collar: No\u003cbr\u003e\nCoil Included: No\u003cbr\u003e\nCoil Type: External\u003cbr\u003e\nRecommended Coil Output: 35,000+ V\u003cbr\u003e\nHousing Material: Aluminum\u003cbr\u003e\nIgnition Box Required: No\u003cbr\u003e\nMarine Use: No\u003cbr\u003e\nCylinders: 8\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562130186536,"sku":"JM6737R","price":105.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm6737r.jpg?v=1732638365"},{"product_id":"6-cylinder-hei-distributor-ignition-coil-dust-cover-red","title":"6-Cylinder HEI Distributor Ignition Coil Dust Cover - Red","description":"\u003cp\u003eUpgrade or restore compatible ignition systems with a distributor component designed for dependable operation, stable ignition performance, and reliable fitment characteristics.\u003c\/p\u003e\n\u003cp\u003eIts durable construction and performance-oriented design help support smooth ignition operation, dependable distributor functionality, and reliable spark performance under varying driving conditions.\u003c\/p\u003e\n\u003cp\u003eWhether used in routine maintenance or performance-oriented applications, this distributor component is built to support long-lasting reliability and consistent ignition system operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003e6-CYLINDER GM-STYLE HEI DISTRIBUTORS\u003cbr\u003e• TSP or GM-style HEI distributor coil cover service applications\u003cbr\u003e• Internal-coil HEI distributor cap assemblies\u003cbr\u003e• Replacement coil dust cover installations\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eVerify HEI coil cover shape, cap style, and hardware requirements before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMMON DISTRIBUTOR APPLICATIONS\u003c\/strong\u003e\u003cbr\u003e• Compatible 6-cylinder HEI distributor assemblies\u003cbr\u003e• Round-coil HEI distributor applications\u003cbr\u003e• Aftermarket HEI distributor setups\u003cbr\u003e• Replacement HEI ignition distributor systems\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003eDistributor Type: HEI\u003cbr\u003eCylinders: 6\u003cbr\u003eColor: Available in Black, Blue, Red\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562130415912,"sku":"JM6903R","price":6.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm6903r.jpg?v=1732638373"},{"product_id":"8-cylinder-hei-distributor-cap-red","title":"8-Cylinder HEI Distributor Cap - Red","description":"Bring cleaner ignition response back to a 8-cylinder HEI distributor with a available in black, blue, red, clear cap and rotor refresh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHEI Spark Routing\u003c\/strong\u003e\u003cbr\u003eBrass terminals help maintain clean contact between the cap, rotor, and HEI-style plug wire ends.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCap \u0026amp; Rotor Service\u003c\/strong\u003e\u003cbr\u003eThe available in black, blue, red, clear cap and matching rotor help replace worn distributor service components during ignition maintenance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003eVerify HEI distributor type, cylinder count, cap attachment style, and spark plug wire terminal ends before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003e8-CYLINDER GM-STYLE HEI DISTRIBUTORS\u003cbr\u003e• Internal-coil HEI distributor cap assemblies\u003cbr\u003e• GM-style coil-in-cap HEI ignition systems\u003cbr\u003e• HEI distributor cap and rotor service applications\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eChevrolet small block and big block HEI conversions\u003cbr\u003eGM street rod and muscle car ignition upgrades\u003cbr\u003eCustom HEI distributor refresh and replacement projects\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eVerify HEI cap style, cylinder count, terminal layout, and coil-in-cap distributor compatibility before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eDistributor Type: HEI\u003cbr\u003eTerminal Type: Male\u003cbr\u003eTerminal Material: Brass\u003cbr\u003eAttachment Type: Clamp\u003cbr\u003eCylinders: 8\u003cbr\u003eColor: Available in Black, Blue, Red, Clear\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562131235112,"sku":"JM6904R","price":9.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm6904_r_b_2.jpg?v=1732638380"},{"product_id":"super-cap-hei-distributor-ignition-coil-dust-cover-red","title":"Super Cap HEI Distributor Ignition Coil Dust Cover - Red","description":"Give the HEI distributor a cleaner service finish with a available in black, gray, red coil dust cover for the cap-mounted ignition coil.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCoil Cover Service\u003c\/strong\u003e\u003cbr\u003eThe cover helps protect and finish the cap-mounted coil area on a compatible HEI distributor.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIgnition Appearance\u003c\/strong\u003e\u003cbr\u003eAvailable in Black, Gray, Red finish helps match or refresh the look of the distributor cap assembly.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003eVerify HEI coil cover shape, cap style, and hardware requirements before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003e6 or 8-CYLINDER GM-STYLE HEI DISTRIBUTORS\u003cbr\u003e• TSP or GM-style HEI distributor coil cover service applications\u003cbr\u003e• Internal-coil HEI distributor cap assemblies\u003cbr\u003e• Replacement coil dust cover installations\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eGM HEI distributor service work\u003cbr\u003eChevrolet small block and big block HEI ignition refresh projects\u003cbr\u003eCustom HEI distributor cap and coil cover replacement work\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eVerify HEI coil cover shape, cap style, and hardware requirements before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eDistributor Type: HEI\u003cbr\u003eCylinders: 6 or 8\u003cbr\u003eColor: Available in Black, Gray, Red\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562131464488,"sku":"JM6906R","price":6.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm6906r-c.jpg?v=1732638388"},{"product_id":"8-cylinder-hei-distributor-ignition-coil-dust-cover-red","title":"8-Cylinder HEI Distributor Ignition Coil Dust Cover - Red","description":"\u003cp\u003eBuilt for reliable ignition system service and distributor maintenance, this component is engineered to support dependable operation and stable ignition performance in compatible applications.\u003c\/p\u003e\n\u003cp\u003eIts durable construction and precision-engineered fitment help maintain proper distributor function while supporting reliable spark delivery and long-term ignition system reliability.\u003c\/p\u003e\n\u003cp\u003eDesigned for compatible ignition setups, this distributor component is intended to provide dependable service life and consistent ignition system operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003e8-CYLINDER GM-STYLE HEI DISTRIBUTORS\u003cbr\u003e• TSP or GM-style HEI distributor coil cover service applications\u003cbr\u003e• Internal-coil HEI distributor cap assemblies\u003cbr\u003e• Replacement coil dust cover installations\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eVerify HEI coil cover shape, cap style, and hardware requirements before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMMON DISTRIBUTOR APPLICATIONS\u003c\/strong\u003e\u003cbr\u003e• Compatible 8-cylinder HEI distributor assemblies\u003cbr\u003e• Round-style HEI distributor applications\u003cbr\u003e• Aftermarket HEI ignition distributors\u003cbr\u003e• Electronic HEI distributor systems\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003eDistributor Type: HEI\u003cbr\u003eCylinders: 8\u003cbr\u003eColor: Available in Black, Blue, Red\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562131726632,"sku":"JM6907R","price":6.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/JM6907R_01.jpg?v=1779300270"},{"product_id":"hei-distributor-snap-on-wire-retainer-red","title":"HEI Distributor Snap-On Wire-Retainer - Red","description":"\u003cp\u003eDesigned to support reliable distributor performance and dependable ignition system operation, this distributor component is engineered for long-term durability and stable fitment in compatible applications.\u003c\/p\u003e\u003cp\u003eThe precision-engineered construction helps maintain proper distributor function while supporting reliable spark delivery, stable ignition characteristics, and dependable operation in both street-driven and performance vehicles.\u003c\/p\u003e\u003cp\u003eBuilt for compatible ignition system configurations, this component is intended to help restore dependable distributor operation, reliable startup performance, and long-term ignition system reliability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eUNIVERSAL\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eThis is designed for a TSP or GM HEI distributor\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003e• Chevrolet\u003cbr\u003e• Ford\u003cbr\u003e• Chrysler\u003cbr\u003e• Pontiac\u003cbr\u003e• AMC\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003eDistributor Type: HEI\u003cbr\u003e\nCylinders: 6 Or 8\u003cbr\u003e\nColor: Available in Black, Blue, Red\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49767422722344,"sku":"JM6908R","price":4.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/JM6908R_01.jpg?v=1779300518"},{"product_id":"hei-distributor-replacement-rotor-red","title":"HEI Distributor Replacement Rotor - Red","description":"\u003cp\u003eUpgrade or restore compatible ignition systems with a distributor component designed for dependable operation, stable ignition performance, and reliable fitment characteristics.\u003c\/p\u003e\u003cp\u003eIts durable construction and performance-oriented design help support smooth ignition operation, dependable distributor functionality, and reliable spark performance under varying driving conditions.\u003c\/p\u003e\u003cp\u003eWhether used in routine maintenance or performance-oriented applications, this distributor component is built to support long-lasting reliability and consistent ignition system operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eUNIVERSAL\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eThis is designed as a direct replacement for TSP or GM HEI distributor rotor\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003e• Chevrolet\u003cbr\u003e• Ford\u003cbr\u003e• Chrysler\u003cbr\u003e• Pontiac\u003cbr\u003e• AMC\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003eDistributor Type: HEI\u003cbr\u003e\nCylinders: 6 Or 8\u003cbr\u003e\nColor: Available in Black, Blue, Red, Clear\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562132578600,"sku":"JM6916R","price":4.55,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm6916r_1.jpg?v=1732638411"},{"product_id":"compact-e-core-remote-ignition-coil-red","title":"Compact E-Core Remote Ignition Coil - Red","description":"Wake up the ignition system with an ignition coil built to deliver stronger spark energy and cleaner engine response.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpark Energy\u003c\/strong\u003e\u003cbr\u003eHigh-output spark energy helps improve ignition consistency during startup, idle, and acceleration.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIgnition Coil Construction\u003c\/strong\u003e\u003cbr\u003ePerformance-style construction helps manage heat while maintaining dependable ignition performance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003e0.355 Ohms primary resistance helps match ignition system requirements. Verify mounting style and ignition compatibility before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eREMOTE E-CORE IGNITION COIL SETUPS\u003cbr\u003e• Electronic distributor ignition systems\u003cbr\u003e• Ignition control box and remote coil configurations\u003cbr\u003e• Performance distributor ignition setups using matching coil terminals\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eClassic V8 ignition upgrades\u003cbr\u003eStreet rod and muscle car ignition systems\u003cbr\u003eDistributor service and ignition refresh projects\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eVerify wiring polarity, ignition box compatibility, and coil terminal style before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eCoil Style: E-Core\u003cbr\u003eColor: Black\u003cbr\u003eInternal Construction: Epoxy\u003cbr\u003ePrimary Resistance: 0.355 Ohms\u003cbr\u003eSecondary Resistance: 4400 Ohms\u003cbr\u003eMaximum Voltage: 40000 V\u003cbr\u003eSpark Duration: 220 Ms\u003cbr\u003ePeak Current: 300 Ma\u003cbr\u003eTurns Ratio: 70:1\u003cbr\u003eInductance: 6.9 Mh\u003cbr\u003eCoil Shape: Square\u003cbr\u003eCoil Wire Attachment: Male\u003cbr\u003eHardware: Included\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562132807976,"sku":"JM6924R","price":45.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm6934r_1600-3_1.jpg?v=1732638418"},{"product_id":"chevy-v8-distributor-hold-down-clamp-red","title":"Chevy V8 Distributor Hold-Down Clamp - Red","description":"\u003cp\u003eWhether replacing a worn ignition component or upgrading a distributor assembly, this part is designed to support dependable ignition system performance and reliable distributor operation.\u003c\/p\u003e\n\u003cp\u003eThe durable materials and precision-fit design help maintain proper distributor functionality while supporting stable ignition characteristics and long-term service reliability.\u003c\/p\u003e\n\u003cp\u003eDesigned for compatible street and performance ignition applications, this distributor component helps provide dependable operation and consistent fitment performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET BIG BLOCK V8 GEN. II (MARK IV)\u003cbr\u003e• 6.5 L \/ 396 in3\u003cbr\u003e• 6.6 L \/ 402 in3\u003cbr\u003e• 7.0 L \/ 427 in3\u003cbr\u003e• 7.4 L \/ 454 in3\u003cbr\u003e\u003cbr\u003eCHEVROLET BIG BLOCK V8 GEN. V\u003cbr\u003e• 7.4 L \/ 454 in3\u003cbr\u003e\u003cbr\u003eCHEVROLET BIG BLOCK V8 GEN. VI\u003cbr\u003e• 7.4 L \/ 454 in3\u003cbr\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. I\u003cbr\u003e• 4.3 L \/ 262 in3\u003cbr\u003e• 4.3 L \/ 265 in3\u003cbr\u003e• 4.4 L \/ 267 in3\u003cbr\u003e• 4.6 L \/ 283 in3\u003cbr\u003e• 4.9 L \/ 302 in3\u003cbr\u003e• 5.0 L \/ 305 in3\u003cbr\u003e• 5.0 L \/ 307 in3\u003cbr\u003e• 5.4 L \/ 327 in3\u003cbr\u003e• 5.7 L \/ 350 in3\u003cbr\u003e• 6.6 L \/ 400 in3\u003cbr\u003e\u003cbr\u003eGM 90° V6\u003cbr\u003e• 4.3 L \/ 262 in3\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003e• Chevrolet\u003cbr\u003e• Ford\u003cbr\u003e• Chrysler\u003cbr\u003e• Pontiac\u003cbr\u003e• AMC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003e\nHold-Down Material: Billet Aluminum\u003cbr\u003e\nFastener Style: Stud\u003cbr\u003e\nHardware: Included\u003cbr\u003e\nColor: Available in Black, Blue, Red, Silver\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562132906280,"sku":"JM6926R","price":9.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/JM6926R_02.jpg?v=1779301855"},{"product_id":"e-core-remote-ignition-coil-red","title":"E-Core Remote Ignition Coil - Red","description":"Give the ignition system a fresh spark source with a performance ignition coil designed for dependable voltage output.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpark Energy\u003c\/strong\u003e\u003cbr\u003eHigh-output spark energy helps improve ignition consistency during startup, idle, and acceleration.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIgnition Coil Construction\u003c\/strong\u003e\u003cbr\u003ePerformance-style construction helps manage heat while maintaining dependable ignition performance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003e0.35 ohms (Ω) primary resistance helps match ignition system requirements. Verify mounting style and ignition compatibility before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eREMOTE E-CORE IGNITION COIL SETUPS\u003cbr\u003e• Electronic distributor ignition systems\u003cbr\u003e• Ignition control box and remote coil configurations\u003cbr\u003e• Performance distributor ignition setups using matching coil terminals\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eClassic V8 ignition upgrades\u003cbr\u003eStreet rod and muscle car ignition systems\u003cbr\u003eDistributor service and ignition refresh projects\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eVerify wiring polarity, ignition box compatibility, and coil terminal style before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eCoil Style: E-core\u003cbr\u003eInternal Construction: Epoxy\u003cbr\u003ePrimary Resistance: 0.35 ohms (Ω)\u003cbr\u003eSecondary Resistance: 8,000 ohms (Ω)\u003cbr\u003eMaximum Voltage: 50,000 volts (V)\u003cbr\u003eSpark Duration: 200 microseconds (µS)\u003cbr\u003ePeak Current: 260 milliamperes (mA)\u003cbr\u003eTurns Ratio: 100:1\u003cbr\u003eInductance: 7.0 millihenrys (mH)\u003cbr\u003eCoil Shape: Square\u003cbr\u003eHousing Material: Billet Aluminum\u003cbr\u003eCoil Wire Attachment: Male\u003cbr\u003eIncluded: Wiring Harness       Plug Wire Connector       Mounting Hardware\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562133954856,"sku":"JM6930R","price":67.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm6930r-a_1.jpg?v=1732638460"},{"product_id":"ford-84-98-tfi-ignition-coil-red","title":"Ford '84-'98 TFI Ignition Coil - Red","description":"Replace a tired factory-style ignition coil with a performance-focused upgrade that helps improve spark consistency.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpark Energy\u003c\/strong\u003e\u003cbr\u003eHigh-output spark energy helps improve ignition consistency during startup, idle, and acceleration.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIgnition Coil Construction\u003c\/strong\u003e\u003cbr\u003ePerformance-style construction helps manage heat while maintaining dependable ignition performance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003e0.2 Ohms primary resistance helps match ignition system requirements. Verify mounting style and ignition compatibility before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eFORD BIG BLOCK 385 V8\u003cbr\u003e• 7.5 L \/ 460 in3\u003cbr\u003e\u003cbr\u003eFORD INLINE 4\u003cbr\u003e• 1.6 L \/ 98 in3\u003cbr\u003e• 1.9 L \/ 116 in3\u003cbr\u003e• 2.0 L \/ 122 in3\u003cbr\u003e• 2.3 L \/ 140 in3\u003cbr\u003e• 2.5 L \/ 153 in3\u003cbr\u003e\u003cbr\u003eFORD INLINE 6\u003cbr\u003e• 4.9 L \/ 300 in3\u003cbr\u003e\u003cbr\u003eFORD SMALL BLOCK WINDSOR V8\u003cbr\u003e• 5.0 L \/ 302 in3\u003cbr\u003e• 5.8 L \/ 351 in3 commonly referred to as 351W\u003cbr\u003e\u003cbr\u003eFORD V6\u003cbr\u003e• 2.8 L \/ 171 in3\u003cbr\u003e• 2.9 L \/ 177 in3\u003cbr\u003e• 3.0 L \/ 182 in3\u003cbr\u003e• 3.8 L \/ 232 in3\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eFord Mustang \/ Thunderbird \/ Cougar TFI ignition applications\u003cbr\u003eFord F-Series \/ Bronco TFI ignition applications\u003cbr\u003eFord Ranger \/ Explorer \/ Aerostar TFI ignition applications\u003cbr\u003eFord 5.0L and 5.8L EFI swap builds using TFI-style ignition\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eOnly 1 ignition coil is required for all applications.\u003cbr\u003eVerify TFI-style coil connector and ignition module compatibility before installation.\u003cbr\u003eSome late applications may use EDIS or coil pack ignition instead of TFI; match the connector before purchase.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eCoil Style: E-Core\u003cbr\u003eColor: Available in Blue or Red\u003cbr\u003eInternal Construction: Epoxy\u003cbr\u003ePrimary Resistance: 0.2 Ohms\u003cbr\u003eSecondary Resistance: 8800 Ohms\u003cbr\u003eMaximum Voltage: 48000 V\u003cbr\u003eTurns Ratio: 132:1\u003cbr\u003eCoil Wire Attachment: Male\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562134184232,"sku":"JM6938R","price":40.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm6938r_1600_1_1.jpg?v=1732638475"},{"product_id":"mini-digital-ignition-control-box-red","title":"Mini Digital Ignition Control Box - Red","description":"Add a cleaner, more dependable ignition signal with an ignition coil built around stronger spark output and reliable operation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpark Energy\u003c\/strong\u003e\u003cbr\u003eHigh-output spark energy helps improve ignition consistency during startup, idle, and acceleration.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIgnition Coil Construction\u003c\/strong\u003e\u003cbr\u003ePerformance-style construction helps manage heat while maintaining dependable ignition performance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003eVerify mounting style and ignition compatibility before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eDISTRIBUTOR-BASED IGNITION CONTROL SYSTEMS\u003cbr\u003e• Magnetic pickup distributor ignition systems\u003cbr\u003e• Electronic distributor ignition setups\u003cbr\u003e• Remote coil ignition configurations\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eClassic V8 ignition upgrades\u003cbr\u003eStreet rod and muscle car ignition systems\u003cbr\u003eDistributor ignition control box installations\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eVerify wiring layout, ignition coil compatibility, distributor trigger type, and mounting location before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eSpark: 95 mJ Per Spark\u003cbr\u003ePrimary Voltage: 435 Volts\u003cbr\u003eSecondary Voltage: 43,000 Volts\u003cbr\u003eSpark Duration: 20° Crankshaft Rotation\u003cbr\u003eCurrent Draw: 0.7 Amps Per 1,000 RPM\u003cbr\u003eDimensions: 5\" x 5 1\/2\" x 2\"\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562134511912,"sku":"JM6939R","price":271.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/JM6939R_01.jpg?v=1752878649"},{"product_id":"buick-odd-fire-6-cylinder-hei-cap-rotor-kit-red","title":"Buick Odd-Fire 6-Cylinder HEI Cap \u0026 Rotor Kit - Red","description":"Service a Buick odd-fire HEI distributor with a available in black or red cap and rotor kit made for the 90-degree V6 ignition layout.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHEI Spark Routing\u003c\/strong\u003e\u003cbr\u003eBrass terminals help maintain clean contact between the cap, rotor, and HEI-style plug wire ends.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCap \u0026amp; Rotor Service\u003c\/strong\u003e\u003cbr\u003eThe available in black or red cap and matching rotor help replace worn distributor service components during ignition maintenance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003eVerify HEI distributor type, cylinder count, cap attachment style, and spark plug wire terminal ends before installation.\u003cbr\u003e\u003cbr\u003eBUICK 90° V6\u003cbr\u003e• 3.7 L \/ 225 in3 \"Dauntless\"\u003cbr\u003e• 3.8 L \/ 231 in3 \"Odd-Fire\"\u003cbr\u003e\u003cbr\u003eNOTE: Fits TSP JM6529 \"Odd-Fire\" HEI distributors\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eBuick 90-degree V6 odd-fire HEI distributor service applications\u003cbr\u003eJeep and Buick V6 conversion\/refresh projects using compatible odd-fire HEI distributors\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eFits TSP JM6529 odd-fire HEI distributors. Verify odd-fire distributor type before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eDistributor Type: HEI\u003cbr\u003eColor: Available in Black or Red\u003cbr\u003eTerminal Type: Male\u003cbr\u003eTerminal Material: Brass\u003cbr\u003eAttachment Type: Clamp\u003cbr\u003eCylinders: 6\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562134708520,"sku":"JM6949R","price":21.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm6949r_001.jpg?v=1732638496"},{"product_id":"8-cylinder-hei-super-cap-rotor-kit-red","title":"8-Cylinder HEI Super Cap \u0026 Rotor Kit - Red","description":"Bring cleaner ignition response back to a 8-cylinder HEI distributor with a available in black, blue, red, clear, gray cap and rotor refresh.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHEI Spark Routing\u003c\/strong\u003e\u003cbr\u003eBrass terminals help maintain clean contact between the cap, rotor, and HEI-style plug wire ends.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCap \u0026amp; Rotor Service\u003c\/strong\u003e\u003cbr\u003eThe available in black, blue, red, clear, gray cap and matching rotor help replace worn distributor service components during ignition maintenance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003eVerify HEI distributor type, cylinder count, cap attachment style, and spark plug wire terminal ends before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003e8-CYLINDER GM-STYLE HEI DISTRIBUTORS\u003cbr\u003e• Internal-coil HEI distributor cap assemblies\u003cbr\u003e• GM-style coil-in-cap HEI ignition systems\u003cbr\u003e• HEI distributor cap and rotor service applications\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eChevrolet small block and big block HEI conversions\u003cbr\u003eGM street rod and muscle car ignition upgrades\u003cbr\u003eCustom HEI distributor refresh and replacement projects\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eVerify HEI cap style, cylinder count, terminal layout, and coil-in-cap distributor compatibility before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eDistributor Type: HEI\u003cbr\u003eColor: Available in Black, Blue, Red, Clear, Gray\u003cbr\u003eTerminal Type: Male\u003cbr\u003eTerminal Material: Brass\u003cbr\u003eAttachment Type: Clamp\u003cbr\u003eCylinders: 8\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562134872360,"sku":"JM6950R","price":15.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/JM6950R_01.jpg?v=1779908013"},{"product_id":"8-cylinder-hei-cap-rotor-kit-red","title":"8-Cylinder HEI Cap \u0026 Rotor Kit - Red","description":"Replace worn HEI cap components with a available in black, blue, red, clear, orange service kit made to restore spark routing through the distributor.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHEI Spark Routing\u003c\/strong\u003e\u003cbr\u003eBrass terminals help maintain clean contact between the cap, rotor, and HEI-style plug wire ends.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCap \u0026amp; Rotor Service\u003c\/strong\u003e\u003cbr\u003eThe available in black, blue, red, clear, orange cap and matching rotor help replace worn distributor service components during ignition maintenance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003eVerify HEI distributor type, cylinder count, cap attachment style, and spark plug wire terminal ends before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003e8-CYLINDER GM-STYLE HEI DISTRIBUTORS\u003cbr\u003e• Internal-coil HEI distributor cap assemblies\u003cbr\u003e• GM-style coil-in-cap HEI ignition systems\u003cbr\u003e• HEI distributor cap and rotor service applications\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eChevrolet small block and big block HEI conversions\u003cbr\u003eGM street rod and muscle car ignition upgrades\u003cbr\u003eCustom HEI distributor refresh and replacement projects\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eVerify HEI cap style, cylinder count, terminal layout, and coil-in-cap distributor compatibility before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eDistributor Type: HEI\u003cbr\u003eColor: Available in Black, Blue, Red, Clear, Orange\u003cbr\u003eTerminal Type: Male\u003cbr\u003eTerminal Material: Brass\u003cbr\u003eAttachment Type: Clamp\u003cbr\u003eCylinders: 8\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562135200040,"sku":"JM6951R","price":15.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm6951_1-1600.jpg?v=1732638513"},{"product_id":"6-cylinder-hei-super-cap-rotor-kit-red","title":"6-Cylinder HEI Super Cap \u0026 Rotor Kit - Red","description":"Give an HEI ignition system a clean service update with a available in black, blue, red, clear cap setup that helps maintain dependable spark delivery.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHEI Spark Routing\u003c\/strong\u003e\u003cbr\u003eBrass terminals help maintain clean contact between the cap, rotor, and HEI-style plug wire ends.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCap \u0026amp; Rotor Service\u003c\/strong\u003e\u003cbr\u003eThe available in black, blue, red, clear cap and matching rotor help replace worn distributor service components during ignition maintenance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003eVerify HEI distributor type, cylinder count, cap attachment style, and spark plug wire terminal ends before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003e6-CYLINDER GM-STYLE HEI DISTRIBUTORS\u003cbr\u003e• Internal-coil HEI distributor cap assemblies\u003cbr\u003e• GM-style coil-in-cap HEI ignition systems\u003cbr\u003e• HEI distributor cap and rotor service applications\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eGM V6 HEI distributor service applications\u003cbr\u003eStreet-driven HEI ignition refresh projects\u003cbr\u003eDistributor cap and rotor replacement service\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eVerify HEI cap style, cylinder count, terminal layout, and coil-in-cap distributor compatibility before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eDistributor Type: HEI\u003cbr\u003eColor: Available in Black, Blue, Red, Clear\u003cbr\u003eTerminal Type: Male\u003cbr\u003eTerminal Material: Brass\u003cbr\u003eAttachment Type: Clamp\u003cbr\u003eCylinders: 6\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562135462184,"sku":"JM6952R","price":15.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm6952gy-1.jpg?v=1732638521"},{"product_id":"6-cylinder-hei-cap-rotor-kit-red","title":"6-Cylinder HEI Cap \u0026 Rotor Kit - Red","description":"Refresh HEI spark transfer with a available in blue, black, red cap and rotor setup built around brass terminals and coil-in-cap distributor service.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHEI Spark Routing\u003c\/strong\u003e\u003cbr\u003eBrass terminals help maintain clean contact between the cap, rotor, and HEI-style plug wire ends.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCap \u0026amp; Rotor Service\u003c\/strong\u003e\u003cbr\u003eThe available in blue, black, red cap and matching rotor help replace worn distributor service components during ignition maintenance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003eVerify HEI distributor type, cylinder count, cap attachment style, and spark plug wire terminal ends before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003e6-CYLINDER GM-STYLE HEI DISTRIBUTORS\u003cbr\u003e• Internal-coil HEI distributor cap assemblies\u003cbr\u003e• GM-style coil-in-cap HEI ignition systems\u003cbr\u003e• HEI distributor cap and rotor service applications\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eGM V6 HEI distributor service applications\u003cbr\u003eStreet-driven HEI ignition refresh projects\u003cbr\u003eDistributor cap and rotor replacement service\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eVerify HEI cap style, cylinder count, terminal layout, and coil-in-cap distributor compatibility before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eDistributor Type: HEI\u003cbr\u003eColor: Available in Blue, Black, Red\u003cbr\u003eTerminal Type: Male\u003cbr\u003eTerminal Material: Brass\u003cbr\u003eAttachment Type: Clamp\u003cbr\u003eCylinders: 6\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562135789864,"sku":"JM6953R","price":15.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/JM6953R_01.jpg?v=1779908178"},{"product_id":"8-cylinder-male-pro-billet-ready-to-run-cap-rotor-kit-red","title":"8-Cylinder Male Pro Billet \u0026 Ready to Run Cap \u0026 Rotor Kit - Red","description":"Refresh a Pro Billet and Ready-to-Run distributor with a available in black, blue, red cap and rotor kit matched to the correct terminal style and cylinder count.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDistributor Series Match\u003c\/strong\u003e\u003cbr\u003eThis is for Pro Billet and Ready-to-Run distributor service, not a coil-in-cap distributor replacement.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTerminal Layout\u003c\/strong\u003e\u003cbr\u003eMale terminal style must match the existing spark plug wire ends and cap design.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003eVerify distributor series, terminal gender, cylinder count, and cap diameter before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003e8-CYLINDER TSP PRO BILLET AND READY-TO-RUN DISTRIBUTORS\u003cbr\u003e• Male terminal cap and rotor service applications\u003cbr\u003e• Ready-to-run distributor cap and rotor replacement\u003cbr\u003e• Pro Billet distributor service components\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eTSP Pro Billet distributor service work\u003cbr\u003eReady-to-run distributor cap and rotor replacement projects\u003cbr\u003eStreet-driven distributor ignition refresh applications\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eMatch the distributor series, terminal gender, cylinder count, and cap diameter before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eTerminal Gender: Male\u003cbr\u003eColor: Available in Black, Blue, Red\u003cbr\u003eTerminal Type: Male\u003cbr\u003eTerminal Material: Brass\u003cbr\u003eAttachment Type: Clip-On\u003cbr\u003eCylinders: 8\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562136052008,"sku":"JM6971R","price":15.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/JM6971R_01.jpg?v=1779904474"},{"product_id":"8-cylinder-female-pro-billet-ready-to-run-cap-rotor-kit-red","title":"8-Cylinder Female Pro Billet \u0026 Ready to Run Cap \u0026 Rotor Kit - Red","description":"Replace worn Pro Billet and Ready-to-Run distributor service components with a available in black, blue, red cap and rotor set built for clean spark routing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDistributor Series Match\u003c\/strong\u003e\u003cbr\u003eThis is for Pro Billet and Ready-to-Run distributor service, not a coil-in-cap distributor replacement.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTerminal Layout\u003c\/strong\u003e\u003cbr\u003eFemale terminal style must match the existing spark plug wire ends and cap design.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003eVerify distributor series, terminal gender, cylinder count, and cap diameter before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003e8-CYLINDER TSP PRO BILLET AND READY-TO-RUN DISTRIBUTORS\u003cbr\u003e• Female terminal cap and rotor service applications\u003cbr\u003e• Ready-to-run distributor cap and rotor replacement\u003cbr\u003e• Pro Billet distributor service components\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eTSP Pro Billet distributor service work\u003cbr\u003eReady-to-run distributor cap and rotor replacement projects\u003cbr\u003eStreet-driven distributor ignition refresh applications\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eMatch the distributor series, terminal gender, cylinder count, and cap diameter before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eTerminal Gender: 208 Series\u003cbr\u003eColor: Available in Black, Blue, Red\u003cbr\u003eTerminal Type: Male\u003cbr\u003eTerminal Material: Brass\u003cbr\u003eAttachment Type: Clip-On\u003cbr\u003eCylinders: 8\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562136248616,"sku":"JM6972R","price":15.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/JM6972R_01.jpg?v=1779303503"},{"product_id":"8-cylinder-male-pro-series-distributor-cap-rotor-kit-red","title":"8-Cylinder Male Pro Series Distributor Cap \u0026 Rotor Kit - Red","description":"Keep a Pro Series ignition setup service-ready with a cap and rotor kit selected by terminal gender, rotor style, and distributor housing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDistributor Series Match\u003c\/strong\u003e\u003cbr\u003eThis is for Pro Series distributor service, not a coil-in-cap distributor replacement.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTerminal Layout\u003c\/strong\u003e\u003cbr\u003eMale terminal style must match the existing spark plug wire ends and cap design.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003eVerify distributor series, terminal gender, cylinder count, and cap diameter before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003e8-CYLINDER TSP PRO SERIES DISTRIBUTORS\u003cbr\u003e• Male terminal Pro Series cap and rotor service applications\u003cbr\u003e• Pro Series distributor cap and rotor replacement\u003cbr\u003e• Distributor service components for matching TSP Pro Series housings\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eTSP Pro Series distributor service work\u003cbr\u003eCustom distributor ignition refresh projects\u003cbr\u003eStreet-driven performance distributor maintenance\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eMatch Pro Series distributor type, terminal gender, cylinder count, and rotor style before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eDistributor Type: Pro Series\u003cbr\u003eColor: Available in Black, Blue, Red\u003cbr\u003eTerminal Type: Male\u003cbr\u003eTerminal Material: Brass\u003cbr\u003eAttachment Type: Clamp\u003cbr\u003eCylinders: 8\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562136445224,"sku":"JM6973R","price":30.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm6973_2-1600.jpg?v=1732638552"},{"product_id":"8-cylinder-female-pro-series-distributor-cap-rotor-kit-red","title":"8-Cylinder Female Pro Series Distributor Cap \u0026 Rotor Kit - Red","description":"Refresh a Pro Series distributor with a available in black, blue, red cap and rotor kit matched to the correct terminal style and cylinder count.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDistributor Series Match\u003c\/strong\u003e\u003cbr\u003eThis is for Pro Series distributor service, not a coil-in-cap distributor replacement.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTerminal Layout\u003c\/strong\u003e\u003cbr\u003eFemale terminal style must match the existing spark plug wire ends and cap design.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003eVerify distributor series, terminal gender, cylinder count, and cap diameter before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003e8-CYLINDER TSP PRO SERIES DISTRIBUTORS\u003cbr\u003e• Female terminal Pro Series cap and rotor service applications\u003cbr\u003e• Pro Series distributor cap and rotor replacement\u003cbr\u003e• Distributor service components for matching TSP Pro Series housings\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eTSP Pro Series distributor service work\u003cbr\u003eCustom distributor ignition refresh projects\u003cbr\u003eStreet-driven performance distributor maintenance\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eMatch Pro Series distributor type, terminal gender, cylinder count, and rotor style before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eDistributor Type: Pro Series\u003cbr\u003eColor: Available in Black, Blue, Red\u003cbr\u003eTerminal Type: Female\u003cbr\u003eTerminal Material: Brass\u003cbr\u003eAttachment Type: Clamp\u003cbr\u003eCylinders: 8\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562136576296,"sku":"JM6974R","price":30.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm6974r-2.jpg?v=1732638561"},{"product_id":"6-cylinder-male-pro-series-distributor-cap-rotor-kit-red","title":"6-Cylinder Male Pro Series Distributor Cap \u0026 Rotor Kit - Red","description":"Replace worn Pro Series distributor service components with a available in black, blue, red cap and rotor set built for clean spark routing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDistributor Series Match\u003c\/strong\u003e\u003cbr\u003eThis is for Pro Series distributor service, not a coil-in-cap distributor replacement.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTerminal Layout\u003c\/strong\u003e\u003cbr\u003eMale terminal style must match the existing spark plug wire ends and cap design.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003eVerify distributor series, terminal gender, cylinder count, and cap diameter before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003e6-CYLINDER TSP PRO SERIES DISTRIBUTORS\u003cbr\u003e• Male terminal Pro Series cap and rotor service applications\u003cbr\u003e• Pro Series distributor cap and rotor replacement\u003cbr\u003e• Distributor service components for matching TSP Pro Series housings\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eTSP Pro Series distributor service work\u003cbr\u003eCustom distributor ignition refresh projects\u003cbr\u003eStreet-driven performance distributor maintenance\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eMatch Pro Series distributor type, terminal gender, cylinder count, and rotor style before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eDistributor Type: Pro Series\u003cbr\u003eColor: Available in Black, Blue, Red\u003cbr\u003eTerminal Type: Male\u003cbr\u003eTerminal Material: Brass\u003cbr\u003eAttachment Type: Clamp\u003cbr\u003eCylinders: 6\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562136740136,"sku":"JM6975R","price":30.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm6975r_1.jpg?v=1732638568"},{"product_id":"6-cylinder-female-pro-series-distributor-cap-rotor-kit-red","title":"6-Cylinder Female Pro Series Distributor Cap \u0026 Rotor Kit - Red","description":"Keep a Pro Series ignition setup service-ready with a cap and rotor kit selected by terminal gender, rotor style, and distributor housing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDistributor Series Match\u003c\/strong\u003e\u003cbr\u003eThis is for Pro Series distributor service, not a coil-in-cap distributor replacement.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTerminal Layout\u003c\/strong\u003e\u003cbr\u003eFemale terminal style must match the existing spark plug wire ends and cap design.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003eVerify distributor series, terminal gender, cylinder count, and cap diameter before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003e6-CYLINDER TSP PRO SERIES DISTRIBUTORS\u003cbr\u003e• Female terminal Pro Series cap and rotor service applications\u003cbr\u003e• Pro Series distributor cap and rotor replacement\u003cbr\u003e• Distributor service components for matching TSP Pro Series housings\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eTSP Pro Series distributor service work\u003cbr\u003eCustom distributor ignition refresh projects\u003cbr\u003eStreet-driven performance distributor maintenance\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eMatch Pro Series distributor type, terminal gender, cylinder count, and rotor style before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eDistributor Type: Pro Series\u003cbr\u003eColor: Available in Blue, Black, Red\u003cbr\u003eTerminal Type: Female\u003cbr\u003eTerminal Material: Brass\u003cbr\u003eAttachment Type: Clamp\u003cbr\u003eCylinders: 6\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562136903976,"sku":"JM6976R","price":30.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm6976r-2.jpg?v=1732638576"},{"product_id":"8-cylinder-gm-efi-distributor-cap-rotor-kit-red","title":"8-Cylinder GM EFI Distributor Cap \u0026 Rotor Kit - Red","description":"Service GM EFI distributor ignition with a cap and rotor kit made for the engine family and terminal style listed in fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEFI Distributor Service\u003c\/strong\u003e\u003cbr\u003eThe cap and rotor replace common wear items inside GM EFI and Vortec distributor assemblies.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTerminal Match\u003c\/strong\u003e\u003cbr\u003eMale or female terminal style must match the existing spark plug wire ends and distributor cap layout.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003eVerify engine family, year range, distributor type, and terminal style before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET BIG BLOCK V8 GEN. II (MARK IV)\u003cbr\u003e• 7.4 L \/ 454 in3\u003cbr\u003e\u003cbr\u003eCHEVROLET BIG BLOCK V8 GEN. V\u003cbr\u003e• 7.4 L \/ 454 in3\u003cbr\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. I\u003cbr\u003e• 5.0 L \/ 305 in3\u003cbr\u003e• 5.7 L \/ 350 in3\u003cbr\u003e\u003cbr\u003eNOTE: Aftermarket cap and rotor designed to replace factory-style distributors used from 1987–1997.\u003cbr\u003eWas only used in one-ton G and P series vans for 1996 and 1997.\u003cbr\u003eWas not used in Vortec applications.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eGM EFI and Vortec distributor service applications\u003cbr\u003eChevrolet truck, SUV, and marine-style distributor refresh projects\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eVerify distributor year range, male\/female terminal style, and engine family before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eTerminal Gender: GM EFI\u003cbr\u003eColor: Available in Black or Red\u003cbr\u003eTerminal Type: Male\u003cbr\u003eTerminal Material: Brass\u003cbr\u003eAttachment Type: Clamp\u003cbr\u003eCylinders: 8\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562137067816,"sku":"JM6984R","price":15.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/JM6984R_01.jpg?v=1779303945"},{"product_id":"low-profile-8-cylinder-male-pro-series-distributor-cap-rotor-kit-red","title":"Low-Profile 8-Cylinder Male Pro Series Distributor Cap \u0026 Rotor Kit - Red","description":"Replace worn Low-Profile Pro Series distributor service components with a available in black or red cap and rotor set built for clean spark routing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDistributor Series Match\u003c\/strong\u003e\u003cbr\u003eThis is for Low-Profile Pro Series distributor service, not a coil-in-cap distributor replacement.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTerminal Layout\u003c\/strong\u003e\u003cbr\u003eMale terminal style must match the existing spark plug wire ends and cap design.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003eVerify distributor series, terminal gender, cylinder count, and cap diameter before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eLOW-PROFILE 8-CYLINDER TSP PRO SERIES DISTRIBUTORS\u003cbr\u003e• TSP JM9601 low-profile distributor service applications\u003cbr\u003e• Male terminal cap and rotor replacement\u003cbr\u003e• Low-profile Pro Series distributor cap and rotor service\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eLow-profile distributor ignition refresh projects\u003cbr\u003eTight-clearance street-driven engine bay distributor service\u003cbr\u003eTSP JM9601 distributor maintenance\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003cbr\u003eDesigned for TSP JM9601 low-profile distributor; will not fit other distributor housings.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eDistributor Type: Low-Profile Pro Series\u003cbr\u003eColor: Available in Black or Red\u003cbr\u003eTerminal Type: Male\u003cbr\u003eTerminal Material: Brass\u003cbr\u003eAttachment Type: Clamp\u003cbr\u003eCylinders: 8\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562137264424,"sku":"JM6988R","price":27.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm6988r_001.jpg?v=1732638589"},{"product_id":"8-cylinder-hei-distributor-super-cap-tune-up-kit-red","title":"8-Cylinder HEI Distributor Super Cap Tune-Up Kit - Red","description":"Give the ignition system a stronger refresh with this red HEI Super Cap tune-up kit, built around 65,000 Volts coil power, brass terminals, and a cap style that adds real visual impact.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSuper Cap Refresh\u003c\/strong\u003e\u003cbr\u003eThe Super Cap layout gives the distributor a bold service update while the brass terminals help maintain clean spark transfer.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpark Transfer\u003c\/strong\u003e\u003cbr\u003eBrass male terminals help reduce corrosion concerns and maintain consistent contact with HEI-style spark plug wire ends.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCoil \u0026amp; Module Setup\u003c\/strong\u003e\u003cbr\u003e65,000 Volts internal coil operation with a 4-Pin GM HEI module helps refresh the electrical side of a 8-cylinder distributor.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003eVerify 8-cylinder distributor layout, clamp attachment style, and male-terminal plug wire ends before installation.\u003cbr\u003e\u003cbr\u003eCOMPATIBLE WITH\u003cbr\u003e8-CYLINDER HEI DISTRIBUTORS\u003cbr\u003e• HEI distributor cap assemblies with male terminals\u003cbr\u003e• Internal coil HEI-style distributor setups\u003cbr\u003e• 4-Pin GM HEI ignition module service applications\u003cbr\u003e\u003cbr\u003eCOMMON VEHICLE APPLICATIONS\u003cbr\u003e8-cylinder GM-style HEI distributor conversions and service work\u003cbr\u003eChevrolet, GM, street rod, and custom engine builds using HEI-style ignition\u003cbr\u003eDistributor cap, rotor, coil, and module refresh projects\u003cbr\u003e\u003cbr\u003eNOTES\u003cbr\u003eUniversal fitment requires matching the distributor cap style, cylinder count, terminal type, and coil-in-cap layout.\u003cbr\u003eVerify spark plug wire terminal style before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eDistributor Type: HEI\u003cbr\u003eTerminal Type: Male\u003cbr\u003eTerminal Material: Brass\u003cbr\u003eAttachment Type: Clamp\u003cbr\u003eCylinders: 8\u003cbr\u003eCoil Type: Internal\u003cbr\u003eCoil Output: 65,000 Volts\u003cbr\u003eModule Type: 4-Pin GM HEI\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562137362728,"sku":"JM6991R-KT","price":45.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm6991r.jpg?v=1732638597"},{"product_id":"8-cylinder-hei-distributor-tune-up-kit-red","title":"8-Cylinder HEI Distributor Tune-Up Kit - Red","description":"Freshen up an HEI ignition system with a red tune-up kit that helps bring back easier starts, cleaner spark transfer, and a more finished engine bay.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCap \u0026amp; Rotor Service\u003c\/strong\u003e\u003cbr\u003eThe red cap and rotor service components help restore the contact points that move spark from the coil to the plug wires.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpark Transfer\u003c\/strong\u003e\u003cbr\u003eBrass male terminals help reduce corrosion concerns and maintain consistent contact with HEI-style spark plug wire ends.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCoil \u0026amp; Module Setup\u003c\/strong\u003e\u003cbr\u003e65,000 Volts internal coil operation with a 4-Pin GM HEI module helps refresh the electrical side of a 8-cylinder distributor.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003eVerify 8-cylinder distributor layout, clamp attachment style, and male-terminal plug wire ends before installation.\u003cbr\u003e\u003cbr\u003eCOMPATIBLE WITH\u003cbr\u003e8-CYLINDER HEI DISTRIBUTORS\u003cbr\u003e• HEI distributor cap assemblies with male terminals\u003cbr\u003e• Internal coil HEI-style distributor setups\u003cbr\u003e• 4-Pin GM HEI ignition module service applications\u003cbr\u003e\u003cbr\u003eCOMMON VEHICLE APPLICATIONS\u003cbr\u003e8-cylinder GM-style HEI distributor conversions and service work\u003cbr\u003eChevrolet, GM, street rod, and custom engine builds using HEI-style ignition\u003cbr\u003eDistributor cap, rotor, coil, and module refresh projects\u003cbr\u003e\u003cbr\u003eNOTES\u003cbr\u003eUniversal fitment requires matching the distributor cap style, cylinder count, terminal type, and coil-in-cap layout.\u003cbr\u003eVerify spark plug wire terminal style before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eDistributor Type: HEI\u003cbr\u003eTerminal Type: Male\u003cbr\u003eTerminal Material: Brass\u003cbr\u003eAttachment Type: Clamp\u003cbr\u003eCylinders: 8\u003cbr\u003eCoil Type: Internal\u003cbr\u003eCoil Output: 65,000 Volts\u003cbr\u003eModule Type: 4-Pin GM HEI\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562137919784,"sku":"JM6992R-KT","price":45.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm6992r.jpg?v=1732638606"},{"product_id":"6-cylinder-hei-distributor-super-cap-tune-up-kit-red","title":"6-Cylinder HEI Distributor Super Cap Tune-Up Kit - Red","description":"Refresh a tired HEI distributor with a Super Cap kit that combines 65,000 Volts coil output, brass terminal contact, and a bold red cap that stands out in a detailed engine bay.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSuper Cap Refresh\u003c\/strong\u003e\u003cbr\u003eThe Super Cap layout gives the distributor a bold service update while the brass terminals help maintain clean spark transfer.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpark Transfer\u003c\/strong\u003e\u003cbr\u003eBrass male terminals help reduce corrosion concerns and maintain consistent contact with HEI-style spark plug wire ends.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCoil \u0026amp; Module Setup\u003c\/strong\u003e\u003cbr\u003e65,000 Volts internal coil operation with a 4-Pin GM HEI module helps refresh the electrical side of a 6-cylinder distributor.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003eVerify 6-cylinder distributor layout, clamp attachment style, and male-terminal plug wire ends before installation.\u003cbr\u003e\u003cbr\u003eCOMPATIBLE WITH\u003cbr\u003e6-CYLINDER HEI DISTRIBUTORS\u003cbr\u003e• HEI distributor cap assemblies with male terminals\u003cbr\u003e• Internal coil HEI-style distributor setups\u003cbr\u003e• 4-Pin GM HEI ignition module service applications\u003cbr\u003e\u003cbr\u003eCOMMON VEHICLE APPLICATIONS\u003cbr\u003e6-cylinder GM-style HEI distributor conversions and service work\u003cbr\u003eChevrolet, GM, street rod, and custom engine builds using HEI-style ignition\u003cbr\u003eDistributor cap, rotor, coil, and module refresh projects\u003cbr\u003e\u003cbr\u003eNOTES\u003cbr\u003eUniversal fitment requires matching the distributor cap style, cylinder count, terminal type, and coil-in-cap layout.\u003cbr\u003eVerify spark plug wire terminal style before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eDistributor Type: HEI\u003cbr\u003eTerminal Type: Male\u003cbr\u003eTerminal Material: Brass\u003cbr\u003eAttachment Type: Clamp\u003cbr\u003eCylinders: 6\u003cbr\u003eCoil Type: Internal\u003cbr\u003eCoil Output: 65,000 Volts\u003cbr\u003eModule Type: 4-Pin GM HEI\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562138804520,"sku":"JM6993R-KT","price":45.28,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm6993r_1.jpg?v=1732638616"},{"product_id":"6-cylinder-hei-distributor-tune-up-kit-black","title":"6-Cylinder HEI Distributor Tune-Up Kit - Black","description":"Restore dependable HEI spark with a black distributor tune-up kit that replaces the cap-side wear items buyers commonly service during ignition maintenance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCap \u0026amp; Rotor Service\u003c\/strong\u003e\u003cbr\u003eThe black cap and rotor service components help restore the contact points that move spark from the coil to the plug wires.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpark Transfer\u003c\/strong\u003e\u003cbr\u003eBrass male terminals help reduce corrosion concerns and maintain consistent contact with HEI-style spark plug wire ends.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCoil \u0026amp; Module Setup\u003c\/strong\u003e\u003cbr\u003e65,000 Volts internal coil operation with a 4-Pin GM HEI module helps refresh the electrical side of a 6-cylinder distributor.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003cbr\u003eVerify 6-cylinder distributor layout, clamp attachment style, and male-terminal plug wire ends before installation.\u003cbr\u003e\u003cbr\u003eCOMPATIBLE WITH\u003cbr\u003e6-CYLINDER HEI DISTRIBUTORS\u003cbr\u003e• HEI distributor cap assemblies with male terminals\u003cbr\u003e• Internal coil HEI-style distributor setups\u003cbr\u003e• 4-Pin GM HEI ignition module service applications\u003cbr\u003e\u003cbr\u003eCOMMON VEHICLE APPLICATIONS\u003cbr\u003e6-cylinder GM-style HEI distributor conversions and service work\u003cbr\u003eChevrolet, GM, street rod, and custom engine builds using HEI-style ignition\u003cbr\u003eDistributor cap, rotor, coil, and module refresh projects\u003cbr\u003e\u003cbr\u003eNOTES\u003cbr\u003eUniversal fitment requires matching the distributor cap style, cylinder count, terminal type, and coil-in-cap layout.\u003cbr\u003eVerify spark plug wire terminal style before installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eDistributor Type: HEI\u003cbr\u003eTerminal Type: Male\u003cbr\u003eTerminal Material: Brass\u003cbr\u003eAttachment Type: Clamp\u003cbr\u003eCylinders: 6\u003cbr\u003eCoil Type: Internal\u003cbr\u003eCoil Output: 65,000 Volts\u003cbr\u003eModule Type: 4-Pin GM HEI\u003cbr\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49760223199528,"sku":"JM6994BK-KT","price":48.31,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm6994bk.jpg?v=1732638623"},{"product_id":"chevy-small-block-big-block-v8-3-0-hp-high-torque-starter-chrome","title":"Chevy Small Block \u0026 Big Block V8 3.0 HP High Torque Starter - Chrome","description":"\u003cp\u003eUpgrade your Chevrolet V8 starting system with a high-torque mini starter engineered for Small Block and Big Block Chevy applications. Featuring a powerful 3.0 horsepower motor and a 3.75:1 gear reduction ratio, this starter delivers increased cranking power for street, performance, and high-compression engine combinations. The compact mid-size design provides additional clearance around headers, oil pans, and tight engine bay configurations while reducing weight compared to many factory starters.\u003c\/p\u003e\n\u003cp\u003eDesigned for reliable hot and cold starts, the gear reduction system helps the starter engage efficiently even when engine temperatures rise after extended driving. The adjustable billet aluminum mounting block allows easier positioning during installation, making it suitable for a wide range of Small Block and Big Block Chevy builds.\u003c\/p\u003e\n\u003cp\u003eFinished in a bright chrome housing, this starter not only improves starting performance but also adds a clean, polished appearance to engine compartments in muscle cars, street rods, hot rods, restorations, and custom builds.\u003c\/p\u003e\n\u003cp\u003eWhether you're replacing a worn factory starter or upgrading a performance engine, this high-torque starter provides dependable starting power and improved clearance where traditional full-size starters can create fitment challenges.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Choose a Mini Starter?\u003c\/strong\u003e\u003cbr\u003eThe compact design helps create additional clearance around headers, oil pans, and other components commonly found in performance engine bays. Compared to many factory-style starters, a mini starter can simplify installation in vehicles with limited space.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt for Reliable Starting\u003c\/strong\u003e\u003cbr\u003eThe 3.0 HP motor and 3.75:1 gear reduction work together to provide strong cranking performance for street, restoration, and performance-oriented Chevrolet V8 applications. Gear reduction technology helps transfer torque efficiently during engine startup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003cbr\u003e• Chrome 3.0 HP High-Torque Starter\u003cbr\u003e• Adjustable Billet Mounting Block\u003cbr\u003e• Mounting Bolts\u003cbr\u003e• Starter Shims\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET BIG BLOCK V8 GEN. II (MARK IV)\u003cbr\u003e• 6.5 L \/ 396 in3\u003cbr\u003e• 6.6 L \/ 402 in3\u003cbr\u003e• 7.0 L \/ 427 in3\u003cbr\u003e• 7.4 L \/ 454 in3\u003c\/p\u003e\n\u003cp\u003eCHEVROLET BIG BLOCK V8 GEN. V\u003cbr\u003e• 7.4 L \/ 454 in3\u003c\/p\u003e\n\u003cp\u003eCHEVROLET BIG BLOCK V8 GEN. VI\u003cbr\u003e• 7.4 L \/ 454 in3 commonly referred to as Vortec 7400\u003c\/p\u003e\n\u003cp\u003eCHEVROLET SMALL BLOCK V8 GEN. I\u003cbr\u003e• 4.3 L \/ 262 in3\u003cbr\u003e• 4.3 L \/ 265 in3\u003cbr\u003e• 4.4 L \/ 267 in3\u003cbr\u003e• 4.6 L \/ 283 in3\u003cbr\u003e• 5.0 L \/ 305 in3\u003cbr\u003e• 5.0 L \/ 307 in3\u003cbr\u003e• 5.4 L \/ 327 in3\u003cbr\u003e• 5.7 L \/ 350 in3\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eChevrolet Chevelle \/ Nova \/ Camaro\u003cbr\u003eChevrolet C10 \/ K10 Trucks\u003cbr\u003eChevrolet Impala \/ El Camino\u003cbr\u003eStreet rod, muscle car, and custom Chevy builds\u003c\/p\u003e\n\u003cp\u003eNOTES\u003cbr\u003eFits 153-tooth and 168-tooth flywheels\u003cbr\u003eVerify flywheel tooth count before starter installation.\u003cbr\u003eDesigned for GM Gen V LT direct-injection engine platforms.\u003cbr\u003eVerify pulley groove count, accessory spacing, and crankshaft fitment before installation.\u003cbr\u003eNot compatible with Gen III\/IV LS, Gen I Small Block Chevy, or Big Block Chevy engines.\u003cbr\u003eMini starter housing helps improve clearance around headers and oil pans.\u003cbr\u003eVerify staggered or straight mounting pattern requirements before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003eStarter Style: \"Mid-Size\"\u003cbr\u003eStarter Type: Tilton\u003cbr\u003eColor: Chrome\u003cbr\u003eAdjustable Mounting Block: Yes\u003cbr\u003eStarter Rotation: Standard\u003cbr\u003eMaximum Compression Ratio: 11.0:1\u003cbr\u003eGear Reduction Ratio: 3.75:1\u003cbr\u003eHorsepower: 3\u003cbr\u003eStarter Housing Material: Cast Aluminum\u003cbr\u003eMounting Block Material: Billet Aluminum\u003cbr\u003eBolts And Shims: Included\u003cbr\u003e\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562139656488,"sku":"JM7001C","price":211.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm7001c-a.jpg?v=1732638632"},{"product_id":"gm-ls-3-0-hp-high-torque-starter-black","title":"GM LS 3.0 HP High Torque Starter - Black","description":"\u003cp\u003e\u003cspan\u003eUpgrade your LS engine's starting system with a high-torque mini starter engineered for GM Gen III and Gen IV LS-based V8 applications. Featuring a powerful 3.0 horsepower motor and 3.75:1 gear reduction ratio, this starter delivers dependable cranking performance for street, performance, and LS swap builds.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCompatible with many 4.8L, 5.3L, 5.7L, and 6.0L LS engine combinations, including popular LS1, LS2, LS6, LQ4, and LQ9 applications, this starter is designed to provide reliable starting power while maintaining a compact footprint. The gear reduction design helps increase torque output for dependable hot and cold starts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe compact Tilton-style housing provides additional clearance around headers, oil pans, steering components, and other tight engine bay areas where traditional starters can create fitment challenges. An adjustable billet aluminum mounting block allows easier starter positioning and installation flexibility for a wide variety of LS-powered vehicles and engine swap projects.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFinished in a black housing, this starter adds a polished appearance to engine compartments while delivering the cranking power needed for performance-oriented LS applications. Whether replacing a worn factory starter or upgrading an LS swap, this high-torque mini starter delivers the power, clearance, and reliability needed for dependable engine starts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003eCompact Mini Starter Design\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe offset Tilton-style housing helps create additional clearance around headers, oil pans, steering linkage, and other engine bay components. Its compact footprint makes it a popular upgrade for performance builds, restoration projects, and LS engine swaps.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Torque Starting Performance\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe 3.0 HP motor and 3.75:1 gear reduction ratio work together to provide strong cranking performance for GM LS-based engine combinations. The gear reduction design helps improve starter efficiency while maintaining a lightweight, compact package.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eCHEVROLET SMALL BLOCK V8 GEN. III\/IV (LS-BASED)\u003cbr\u003e• 4.8 L \/ 293 in3 (LR4)\u003cbr\u003e• 5.3 L \/ 325 in3 (L33, L59, LM4, LM7)\u003cbr\u003e• 5.7 L \/ 346 in3 (LS1, LS6)\u003cbr\u003e• 6.0 L \/ 364 in3 (LQ4, LQ9, LS2)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMMON VEHICLE APPLICATIONS\u003c\/strong\u003e\u003cbr\u003eChevrolet Chevelle \/ Nova \/ Camaro\u003cbr\u003eChevrolet C10 \/ K10 Trucks\u003cbr\u003eChevrolet Impala \/ El Camino\u003cbr\u003eStreet rod, muscle car, and custom Chevy builds\u003cbr\u003e\u003cbr\u003eNOTES\u003cbr\u003eDesigned for GM Gen III and Gen IV LS-based engine platforms. Verify oil pan, header, flexplate, and mounting clearance before installation. Mini starter housing helps improve clearance around headers and oil pans.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003eStarter Style: Mini\u003cbr\u003eStarter Type: Tilton\u003cbr\u003eColor: Black\u003cbr\u003eAdjustable Mounting Block: Yes\u003cbr\u003eStarter Rotation: Standard\u003cbr\u003eMaximum Compression Ratio: 11.0:1\u003cbr\u003eGear Reduction Ratio: 3.75:1\u003cbr\u003eHorsepower: 3\u003cbr\u003eStarter Housing Material: Cast Aluminum\u003cbr\u003eMounting Block Material: Billet Aluminum\u003cbr\u003e\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562139984168,"sku":"JM7002BK","price":203.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/jm7002bk-a.jpg?v=1732638640"}],"url":"https:\/\/www.topstreetperformance.com\/collections\/ignition-and-electrical.oembed","provider":"Top Street Performance","version":"1.0","type":"link"}